Written by Boris Schäling.
Boost.Build is a high-level build system which makes it as easy as possible to manage C++ projects. The idea is to specify in configuration files just as much as necessary to build a program. For example it is not required to tell Boost.Build how to use a certain compiler. Boost.Build supports many compilers out of the box and knows how to use them. If you create a configuration file you just need to tell Boost.Build where to find the source files, what the executable should be called and which compiler Boost.Build should use. Boost.Build will then try to find the compiler and automatically build the program.
As Boost.Build supports many compilers configuration files never contain any compiler-specific options. Configuration files are entirely compiler-independent. Of course it is possible to set options like whether code should be optimized. However these options are written in a language only understood by Boost.Build. Once a compiler is picked to build a program Boost.Build translates options in configuration files to command line options expected by the selected compiler. This makes it possible to write configuration files once and build a program on different platforms with different compilers.
As nice as it sounds Boost.Build can only be used for C++ and C projects. Boost.Build doesn't know how to use other compilers like a Java compiler. Although Boost.Build is extensible it makes more sense to use a different build system for programs implemented in other programming languages.
Boost.Build was created to build and install the Boost C++ libraries easily with different compilers on different platforms. Although Boost.Build is part of and shipped with the Boost C++ libraries it can be used separately for any C++ or C project. It's even possible to download only Boost.Build in case you don't want to use the Boost C++ libraries.
This article is an introduction to help you using Boost.Build for your own C++ or C projects. It gives you a basic understanding of how Boost.Build works and how you start using it. After reading the article you should not only be able to use Boost.Build for your own projects, it will also be easier to understand the Boost.Build documentation as you'll know the big picture.
The program you use to build a project managed by Boost.Build is called b2. If you downloaded and built the Boost C++ libraries you have used b2 already. b2 looks for configuration files, reads them and builds a project accordingly. It also accepts various command line options which can be useful for example to show all commands executed by b2 to build a project.
Projects can be large and can consist of many components whose source code is distributed over many directories. Instead of creating one big configuration file for the entire project components typically get their own configuration files. This is no different with Boost.Build: In a large project there will be many configuration files which have to be found and interpreted by b2.
For Boost.Build every directory with a configuration file is a project: If there is a configuration file in a directory something can be built. Whether it's a component in a subdirectory or a software consisting of many components doesn't make a difference for Boost.Build.
When b2 is started it doesn't run a search for configuration files on the entire file system. It searches for a configuration file in the current working directory only. If it doesn't find a configuration file it doesn't do anything. b2 does not search for configuration files in any other directory if there is no configuration file in the current working directory.
The configuration file b2 is looking for is called
Jamfile.jam. Files with the extension
jam are called Jamfiles. If b2 finds a Jamfile in the current
working directory it searches for more Jamfiles in parent directories.
b2 climbs up parent
directories until it finds a configuration file called
Jamroot.jam is no different from
Jamfile.jam. It only indicates that b2 doesn't need to look
The reason why b2 looks for Jamfiles in parent directories is that it makes it possible to group settings. If there are some components which should be built with similar settings they can be stored in a Jamfile in a parent directory which will be automatically used if a component in a subdirectory is built.
Please note that b2
must find a file called
is an error if no
Jamroot.jam exists. If
Jamroot.jam is in the current working
directory no other file
Jamroot.jam is in a parent
directory a file
Jamfile.jam must exist
in the current working directory - otherwise b2 doesn't do anything.
If you copy b2 to a directory which contains no Jamfiles and start the program you get an error message. However b2 doesn't complain that it can't find a Jamfile. It complains about not finding the build system.
Unable to load Boost.Build: could not find "boost-build.jam" --------------------------------------------------------------- Attempted search from C:\Users\Boris\Desktop up to the root Please consult the documentation at 'http://www.boost.org'.
The first thing b2 does is not looking for a Jamfile but loading the build system. But what exactly is the build system?
b2 is an interpreter. It doesn't really know how to build anything. What b2 does is interpreting Jamfiles. Boost.Build is really implemented in Jamfiles. And they contain all the logic which makes Boost.Build such a powerful tool. As b2 only does what it reads in Jamfiles it needs to know where to find the Jamfiles Boost.Build is made of.
When b2 is started
it looks for a file
the current working directory. If it doesn't find the file it searches
all parent directories. This file needs to contain only one line to
tell b2 where to find
the build system.
boost-build C:/boost_1_57_0/tools/build/src ;
The path after
boost-build must refer to a
directory which contains a file called
bootstrap.jam. This is the file b2 needs to load the build system.
As the Boost C++ libraries ship Boost.Build you can refer to the
tools/build of the root
directory of the Boost C++ libraries. And you can always use a slash as
a path separator - even if you are on Windows.
Please note that there must be a space between the path and the semicolon at the end of the line. It is an error if the space is missing. You'll learn more about the syntax used in Jamfiles later in this article.
If b2 finds
boost-build.jam it uses the path within
the file to load the build system. When the build system is loaded it
also prepares itself to use a certain compiler, linker and maybe other
tools required to build a project. Boost.Build refers to these programs
as a toolset. If no command line option is used to start b2 the build system tries to find a
toolset it can use automatically. On Windows for example it searches
for Visual C++. And if it detects that Visual C++ is installed it uses
the toolset msvc.
warning: No toolsets are configured. warning: Configuring default toolset "msvc". warning: If the default is wrong, your build may not work correctly. warning: Use the "toolset=xxxxx" option to override our guess. warning: For more configuration options, please consult warning: http://boost.org/boost-build2/doc/html/bbv2/advanced/configuration.html
If you start b2 without specifying which toolset should be used you see a warning. b2 tells you which toolset it detected and decided to use. If you want to suppress the warning you must specify the toolset yourself. For example you tell the build system to use Visual C++ with b2 toolset=msvc. If you want GCC to be used you enter b2 toolset=gcc.
As of today there are more than 10 toolsets supported. There is a good chance that Boost.Build will work with the compiler you use out of the box.
Once the build system has been found, loaded and knows which toolset
to use - either because you specified one or the build system detected
one automatically - b2
looks for a file
Jamfile.jam in the
current working directory. If it doesn't find a Jamfile an error
message is printed.
error: error: no Jamfile in current directory found, and no target references specified.
If you create an empty file
Jamfile.jam and start b2 again another error message is
error: Could not find parent for project at '.' error: Did not find Jamfile.jam or Jamroot.jam in any parent directory.
b2 is ultimately
looking for a Jamfile called
If it doesn't exist in the current working directory b2 expects to find it in a parent
If you create an empty file
Jamroot.jam and start b2 the error message is gone.
Obviously there is nothing done by Boost.Build. But now you know how
b2 proceeds to build a
program and what the minimum Boost.Build configuration looks like.
Please note that if you work on a small project and you need only
one configuration file you can simply call it
Jamroot.jam. You don't need another file called
If you look at Jamfiles the syntax might remind you of configuration files used by other build systems. Simple Jamfiles can look like plain old configuration files where for example values seem to be assigned to keys. What is important to understand though is that Jamfiles are really script files. There is a programming language used to write Jamfiles. b2 isn't the core component of Boost.Build which knows how to build programs. The logic of Boost.Build is in the Jamfiles which tell b2 how to build programs.
Even though Boost.Build is based on a programming language you don't need to think of programming when you create Jamfiles. The syntax of the programming language used by Boost.Build tries to remind you more of creating plain old configuration files. The idea is to have the best of two worlds: A powerful and flexible programming language but a simple syntax you might be familiar with from other build systems.
Let's look at a simple Jamfile which can be used to build an
executable hello from a
exe hello : hello.cpp ;
Boost.Build provides a lot of built-in rules and
exe is one of them. While the documentation of
Boost.Build refers to
exe as a rule you know
already that the above Jamfile is actually built using a programming
language. As it turns out rules are simply functions. And the Jamfile
above contains a function call.
For the majority of tasks which are typically required to build
programs Boost.Build provides predefined rules - or functions if you
like. As with functions in other programming languages it is possible
to pass parameters. In the Jamfile above the function
exe is called with the two parameters hello and
The programming language Boost.Build is based on knows only one data
type: Everything is a list of strings. A list can be empty or contain
one or more strings. In the Jamfile above the function
exe is called with two parameters each one a list
containing one string.
exe "hello" : "hello.cpp" ;
It is possible to use quotes. It's not necessary though as after all every item in a list has the data type string anyway. Quotes are only used if parameters contain spaces.
While there is no special delimiter between a rule and the first parameter a colon must be used to separate other parameters. It is also required to end a line with a semicolon just as you are used to from C++.
Please note that the programming language of Boost.Build requires that there is a space around all tokens. For example there must be a space on the left and on the right of the colon and there must be a space on the left of the semicolon. Without spaces around tokens b2 won't be able to parse Jamfiles correctly.
If b2 is run in a
directory which contains the Jamfile above and a source file
hello.cpp, and if the msvc toolset is
used on Windows a subdirectory
bin\msvc-9.0\debug is created to build an executable
...found 9 targets... ...updating 5 targets... common.mkdir bin common.mkdir bin\msvc-9.0 common.mkdir bin\msvc-9.0\debug compile-c-c++ bin\msvc-9.0\debug\hello.obj hello.cpp msvc.link bin\msvc-9.0\debug\hello.exe msvc.manifest bin\msvc-9.0\debug\hello.exe ...updated 5 targets...
As you see it takes only one line in a Jamfile to build an
executable from a source file. And if the program is built on Windows
there is even the correct file extension
The main advantage of Boost.Build is that you specify just as much
as necessary for a build system to know how to build a program.
Anything Boost.Build can do automatically is done automatically. You
don't need to detect the platform a program is built on to decide if a
file extension like
exe should be
appended or not. And you don't need to specify how a compiler like
Visual C++ has actually to be invoked to compile source code.
Boost.Build supports a lot of toolsets out of the box. As a program can be built using different toolsets Boost.Build uses toolset-specific directories. This way it is possible to build a program with different toolsets without a toolset constantly overwriting files produced by another toolset.
There are not only toolset-specific directories but also
variant-specific directories. A variant is a debug or release version
of a program. For each variant another directory is used to build a
program - again for the reason not to overwrite files produced by
another variant. By default the debug variant is used. That's why the
created. If you want a release version to be created you can specify
the variant on the command line with b2
variant=release or, even simpler,
b2 release .
...found 9 targets... ...updating 5 targets... common.mkdir bin common.mkdir bin\msvc-9.0 common.mkdir bin\msvc-9.0\release compile-c-c++ bin\msvc-9.0\release\hello.obj hello.cpp msvc.link bin\msvc-9.0\release\hello.exe msvc.manifest bin\msvc-9.0\release\hello.exe ...updated 5 targets...
With the variant set to release the subdirectory
bin\msvc-9.0\release is used to create the executable
Choosing a variant is something which is done so often that it's sufficient to enter b2 release. Boost.Build figures out that release is meant to choose the variant.
If you don't want to specify the variant on the command line but
want to build release versions of
hello.exe by default the Jamfile has to be
exe hello : hello.cpp : <variant>release ;
exe rule (or, if you prefer, function)
accepts a few more parameters which are optional. The third parameter
is a list of requirements. You can think of command line options which
are always set and passed to commands run to build an executable.
In order to force a release version to be built the variant has to be set to release just as it was done before on the command line. The syntax to set the variant in a Jamfile is different though.
Boost.Build defines features which look like XML tags. One of the
features supported by Boost.Build is
<variant>. If a feature should be set to a value it
has to be put next to it - without a space in between. Some features
are free which means they can be set to any value you want.
<variant> is a non-free feature as it
can only be set to debug or release. No other value is allowed. If
another value is set
b2 will report an
If you run
b2 variant=debug and try to
build a debug version of
won't work as the Jamfile contains the requirement that
hello.exe is built as a release version. If you want
to be able to overwrite the feature on the command line you have to
pass the feature as the fourth parameter instead of the third.
exe hello : hello.cpp : : <variant>release ;
The fourth parameter contains features which are used by default but which can be overwritten.
If you want both a debug and a release version of
hello.exe to be built by default the
<variant> feature needs to be set twice to debug
exe hello : hello.cpp : : <variant>debug <variant>release ;
It is important that
set twice in the fourth parameter where default values are specified.
If it was the third parameter where requirements are specified
b2 would report an
error. It is possible to set a feature multiple times in the
requirements but only if values are not mutually exclusive. As a
program can't be a debug and a release version at the same time
<variant> must be set in the default
values. Only then Boost.Build understands that two versions of
hello.exe should be built.
exe hello : hello.cpp : <define>WIN32 <define>_WIN32 : <variant>debug <variant>release ;
The above Jamfile is an example for setting a feature multiple times
in the requirements. The feature
<define> is used to define preprocessor directives.
It is no problem to define several preprocessor directives. Thus there
are now two versions of
both with the two directives
exe hello : hello.cpp : : <variant>debug <variant>release <define>WIN32 <define>_WIN32 ;
If the definitions are moved to the fourth parameter and you run
b2 you get the same two
hello.exe built with the two
not expect mutually exclusive values there is no other set of
executables generated. The only difference between this Jamfile and the
previous one is that directives passed in the fourth parameter are
default values which can be dropped while anything passed as a third
parameter is an immutable requirement.
Here is another example of a feature whose values are mutually exclusive.
exe hello : hello.cpp : : <variant>debug <variant>release <optimization>speed <optimization>off ;
b2 creates four
hello.exe: A debug version
optimized for speed, a debug version with no optimization, a release
version optimized for speed and a release version with no optimization.
All of these versions are built in seperate directories which are
So far the only rule used was
exe. But of
course Boost.Build provides many more built-in rules. Another important
lib. It is used to build a
lib world : world.cpp ;
The above Jamfile builds a shared library from the source file
world.cpp. On Windows a file
world.dll is created. The usual file extension is
again automatically appended by Boost.Build.
By default a shared library is built. If you want a static library
to be generated you set the
feature to static.
lib world : world.cpp : <link>static ;
Another useful rule is
executables and libraries have been built this rule can be used to
exe hello : hello.cpp ; install "C:/Program Files/hello" : hello ;
The above Jamfile installs the executable
hello.exe to the directory
C:\Program Files\hello. The second parameter hello is
a reference to the target hello defined in the first line. Please note
that the path has to be put in quotes as it contains a space.
Here concepts known from other build systems shine through: Instead of thinking of function calls every line defines a target. Dependencies are created by referencing other targets. That's how Boost.Build knows in what order it should build targets.
Typically the rule
install is written
differently though. Instead of passing the installation directory as
the first parameter a feature
<location> is used to set the installation
directory in the third parameter.
exe hello : hello.cpp ; install install-bin : hello : <location>"C:/Program Files/hello" ;
The main reason why it's better to use
<location> is that the first parameter always
defines a target. Other rules might refer to a target. That's why it is
a good idea to use target names which don't have to be changed later.
Imagine a program should be installed to a different directory. It's
easier to change the installation directory if the
<location> feature has been used as no other rules
which might refer to install-bin have to be updated.
There is another reason why it makes sense to use a feature. Boost.Build supports conditional properties which make it possible to use different installation directories depending on the platform a program is built on.
exe hello : hello.cpp ; install install-bin : hello : <target-os>windows:<location>"C:/Program Files/hello" <target-os>linux:<location>/usr/local/bin ;
<target-os> is another
feature with mutually exclusive values. It can be set for example to
windows or linux but not to both.
<target-os> only delimited by a colon.
Such a construct is called conditional property: Boost.Build selects
the installation directory depending on the operating system.
Of course conditional properties can also be used with other rules. It is for example possible to define different preprocessor directives depending on the variant when building a program or a library.
Boost.Build provides many more built-in rules. Another useful rule
glob which makes it possible to use
wildcards. In a big project with many source files it's then not
required to list them all one by one but refer to all of them with
exe hello : [ glob *.cpp ] ;
The above Jamfile contains a nested function call: The result of the
glob is passed as the second parameter
exe. Due to requirements of the
programming language Boost.Build is based on brackets must be used for
nested function calls.
In large projects with many Jamfiles it's necessary to connect
Jamfiles somehow. There is typically a
Jamroot.jam file in the project's root directory and
Jamfile.jam files in subdirectories.
If b2 is run in the
root directory developers probably expect that the entire project
including all components in subdirectories is built. As b2 looks for Jamfiles in parent
directories but not in subdirectories Jamfiles need to refer to
Jamfiles in subdirectories explicitly.
build-project hello ;
If a Jamfile looks like the sample above it refers to a Jamfile in a
build-project is a rule which expects a path as its sole
parameter. The path is then used to lookup a Jamfile.
build-project hello ; build-project world ;
If you want several projects to be built you must use
build-project multiple times.
Apart from referring to Jamfiles in subdirectories it makes also sense to group options which should be used when building components in a project.
project : default-build release ; build-project hello ; build-project world ;
project rule accepts various
parameters to set options for the Jamfile in the current working
directory and in subdirectories.
While other rules like
lib expect parameters to be passed in a
project uses named arguments.
In the sample above the argument's name is default-build. That's why it
is possible to pass the value release in a very different
project : : : : : : : : : default-build release ; build-project hello ; build-project world ;
It doesn't make sense to pass release as the tenth parameter. But it
project doesn't care about the
order. As the tenth parameter is called default-build it is
project supports only a few named
arguments. Another one is requirements which can be used to set options
which can't be overwritten.
project : requirements <variant>release ; build-project hello ; build-project world ;
The Jamfile above builds only release versions. It is not possible to build a debug version anymore as requirements can not be overwritten. That's the difference to the named argument called default-build which was used in the previous sample: It can be overwritten.
build-project is used Boost.Build
assumes that the parameter is a reference to a subdirectory. We had
seen another type of reference before.
exe hello : hello.cpp ; install install-bin : hello : <location>"C:/Program Files/hello" ;
In the above Jamfile the
refers to the target hello defined in the first line.
In a large project it might be necessary to refer to targets which are defined in Jamfiles in other directories. It is possible to concatenate a path to a Jamfile and a target with a double slash.
install install-bin : subdir//hello : <location>"C:/Program Files/hello" ;
install rule refers to a target
hello in a Jamfile in the subdirectory
Let's assume that the executable hello depends on a library in another
world. The library is also
built with Boost.Build using the rule
lib world : world.cpp ;
In the Jamfile to build the executable a reference is required to the Jamfile of the library. It's not necessary to refer to the target world directly as all targets in a Jamfile are built by default.
exe hello : hello.cpp world : : <variant>debug <variant>release ;
The above Jamfile assumes that the library and its Jamfile are in a
When the executable is built there are two versions generated - a
debug and a release version. The Jamfile of the library however doesn't
<variant> feature. But
Boost.Build assumes that it should build two versions of the library,
too. The feature
<variant> is said to
Propagating features simplify project management as you don't need to set the same features in various Jamfiles. However it also makes it a bit more complicated to understand how components are built as it all depends on what features are propagated. You can assume that Boost.Build knows what it should do. But of course it doesn't mean that you easily understand what it does.
Let's look at another example using the feature
exe hello : hello.cpp world : <define>WIN32 : <variant>debug <variant>release ;
The above Jamfile defines a preprocessor directive
WIN32 for the program hello. But will
WIN32 be defined for the library, too?
It won't as
<define> is not a
propagating feature. If you wonder how you should know: The only way to
find out which features are propagated is to lookup the
If you installed the Boost C++ libraries you probably want to link against some of them. You somehow have to add a dependency to the respective Boost C++ library to your project's Jamfile. If you didn't delete the directories you had unzipped the source files of the Boost C++ libraries to you can refer to a target in a Jamfile in the root directory.
exe hello : hello.cpp world C:/boost_1_39_0//filesystem/ ;
Now hello also depends
on the Boost.Filesystem library. As the target filesystem is defined in
a Jamfile in the root directory of the Boost C++ libraries the
exe rule can refer to it. Not only will the
appropriate Boost C++ libraries be linked - an include directory is
also passed to the compiler to find the header files. If
boost/filesystem.hpp the header file will be
In the above Jamfile the path to the root directory of the Boost C++ libraries is hardcoded. Somehow b2 needs to know where to find the Boost C++ libraries. But it would be better if the path was hardcoded only once in case several components in a project need to link against some Boost C++ libraries.
project : requirements <variant>release ; use-project /boost : C:/boost_1_39_0 ; build-project hello ; build-project world ;
use-project rule is used to define an
alias to a Jamfile in another directory. Jamfiles in subdirectories use
then the alias to refer to a Boost C++ library.
exe hello : hello.cpp world /boost//filesystem ;
b2 figures out that
hello.cpp is a source file,
world a subdirectory and /boost//filesystem a
reference to a target filesystem in a Jamfile in
Please note that a reference must start with a slash if it should refer to a project.
As libraries can be linked differently it is possible to set features relevant to the linker.
exe hello : hello.cpp world /boost//filesystem/<link>static ;
By default libraries are linked dynamically. If libraries should be
linked statically the feature
has to be set to static.
Features can be appended with a slash. If more than one feature should be set it is appended with another slash to the previous feature.
exe hello : hello.cpp world /boost//filesystem/<link>static/<threading>multi ;
<threading> is another feature which
can be set to single or multi. If hello should be linked against the
thread-safe version of Boost.Filesystem the feature can be set
Linking a Boost C++ library by referencing a Jamfile might not always work. If the Boost C++ libraries were installed differently because they weren't built from source for example there won't be any Jamfile to reference.
lib filesystem : : <name>libboost_filesystem <search>C:/libs ; exe hello : hello.cpp world filesystem : <include>C:/include ;
lib rule can not only be used to build
a library from source. It also has to be used to refer to an existing
and pre-built library.
lib shouldn't build a library from
source the second parameter must be empty. Instead in the third
parameter the features
<search> are used to specify the
library's name and a location where Boost.Build will find the
It is important to specify the library's name in a
platform-independent way. For example for the Jamfile above Boost.Build
will try to find a file
libboost_filesystem.lib on Windows. The usual file
extension is again automatically appended.
If you want to reference a file by specifying its exact name you can
If a system library should be referenced for which you can expect
Boost.Build to know where to find it the feature
<search> can be dropped.
It is also possible to use the
rule to make sure all targets in a project are automatically linked
against a library.
lib filesystem : : <name>libboost_filesystem <search>C:/libs ; explicit filesystem ; project : requirements <include>C:/include <library>filesystem ; lib world : world.cpp ;
A feature called
<library> must be
used to add a library dependency to a
<library> must refer to a
lib rule which uses the already known
It is now very important to make the
rule explicit. This is done by using the
explicit rule. It is important as by default all targets
in a Jamfile are built. As the
defines requirements for all targets in the Jamfile they are also
requirements for the
lib rule. Thus the
lib rule refers to itself. If the
lib rule is made explicit though it's not
built and no recursive reference occurs.
Please note that the order of rules in a Jamfile matters only if a rule refers to a target: Before a target can be referenced it must have been defined.
As Boost.Build is a high-level build system you benefit most if you keep Jamfiles platform- and compiler-independent. After all the idea is to build your C++ or C projects on any platform with any compiler without being required to modify or maintain several Jamfiles.
A typical problem you'll run into is that third-party libraries you want to use will be installed in different directories. If you want to build your project on Windows and Unix platforms paths also look very different. Furthermore you might need to link against some system libraries on a platform but not on another.
Instead of trying to put paths for various platforms in a project's Jamfiles it is better to rely on configuration files on every system for system-specific settings. As it turns out b2 does indeed look for two more configuration files when it starts.
site-config.jam should be
used to set options for an entire system. As it is machine-dependent
b2 expects to find it
C:\Windows on Windows platforms and in
/etc on Unix systems. As
site-config.jam is machine-dependent paths to local
libraries are no problem.
Users might not be able to create or change
site-config.jam though. They would either need to
wait for system administrators to update the file or be forced again to
add system-specific paths to their own Jamfiles. As neither is a good
solution, b2 also looks
for a file
user-config.jam in a user's
home directory. On Windows it is a subdirectory of
C:\Users, on Unix a subdirecory of
/home. As the file
user-config.jam can be maintained by users it is
probably used more often than
user-config.jam just like any other
Jamfile. As these configuration files do not belong to a project but to
a machine or a user on a machine they are allowed to contain
machine-specific options. For example they could contain a
using msvc ;
using rule above tells b2 to use the msvc toolset. If you
know that there is only Visual C++ installed on a system it makes sense
to put this line into a configuration file. Then b2 doesn't need to guess anymore
which toolset to use and won't omit a warning.
If you define targets in
user-config.jam and want to refer to these targets in
project rule must be used to set
using msvc ; project user-config ; lib xml : : <name>libxml <search>C:/lib : : <include>C:/include ;
lib rule is used to refer to a
pre-built library whose basename is libxml and can be found in
C:\lib. A program which uses this XML
library probably needs to include header files from this library.
That's why in the usage requirements - this is the fifth parameter -
<include> is set to
C:\include: Whoever uses this rule will
project rule has been used to set
the name user-config a Jamfile can refer to the XML library via
exe xmlparser : xmlparser.cpp : <library>/user-config//xml ;
In order to build xmlparser the program must be linked against the XML library. Even though the location of the library and its header files might vary the Jamfile does not contain any system-specific paths. The Jamfile expects to find the target xml in the project user-config. If this is a configuration file it's no problem to use system-specific paths as after all configuration files are bound to a machine or to a user on a machine.
As Boost.Build has been created to build and install the Boost C++ libraries there is built-in support to use pre-built Boost C++ libraries more easily.
using msvc ; project user-config ; using boost : 1.39 : <include>C:/include/boost-1_39 <library>C:/lib ;
using rule must be used to refer to a
toolset called boost. This toolset is different from toolsets like msvc
which you've read about so far: It doesn't contain any programs which
will be run later. As support for pre-built Boost C++ libraries has
been implemented in a toolset though it's required to use the
Just as with other libraries the location of the Boost C++ libraries
might vary. Thus it makes sense to put the
using rule into one of the two configuration files.
It is possible to pass parameters to the
using rule: The first one is the version number, the
second a list of options. In the Jamfile above the Boost C++ libraries
1.39 are used which can be found in the directories passed as
Once the boost toolset is used it is possible to use Boost C++ libraries without defining targets yourself.
import boost ; boost.use-project 1.39 ; exe hello : hello.cpp : <library>/boost//thread ;
If a program uses a Boost C++ library it can refer to targets in a
project called boost. In order to recognize the project boost though
the boost module must be imported and the rule
boost.use-project used: Importing the boost module makes
boost.use-project rule available. This
rule expects a version number as its sole argument. As it is possible
to use the
using rule to refer to various
versions of the Boost C++ libraries a project can specify which version
it wants to use. In the Jamfile above the program hello uses Boost.Thread from version
If you manage a project with Boost.Build and create Jamfiles you use rules all the time. Thus you should know which rules exist and how they are used. The following table gives you an overview about the most important rules.
There is a star, plus sign or question mark behind some parameters. The star means there can be arbitrary many values, the plus sign there must be at least one value and the question mark there must be zero or exactly one value.
|alias||name : sources * : requirements * : default-build * : usage-requirements *||Refer to sources or any other targets via a new name.|
|build-project||dir||Refer to a Jamfile in another directory to build a project.|
|conditional||condition + : requirements *||Create conditional requirements without using conditional properties.|
|exe||name : sources * : requirements * : default-build * : usage-requirements *||Build an executable.|
|explicit||target-names *||Make targets explicit.|
|glob||wildcards + : excludes *||Reference files in a directory via wildcards.|
|glob-tree||wildcards + : excludes *||Reference files in a directory and all subdirectories via wildcards.|
|install||name-and-dir : sources * : requirements * : default-build *||Install files to a directory.|
|lib||names + : sources * : requirements * : default-build * : usage-requirements *||Build a library.|
|project||id ? : options * : *||Set project options.|
|unit-test||target : source : properties *||Build and run an executable.|
|use-project||id : where||Reference a Jamfile in another directory to use the project id as a target.|
|using||toolset-module : *||Select a toolset.|
Your Boost.Build version might support more rules than listed above.
If you want to find out which rules are supported you should check out
the files in the subdirectory
your Boost.Build installation.
Features allow you to specify exactly how binaries are built. As there are many configuration options available the list of features is pretty long. The following table introduces you to the most important features.
|<address-model>||16, 32, 64, 32_64||Generate 16-, 32- or 64-bit code.|
|<architecture>||x86, ia64, sparc, power, mips1, mips2, mips3, mips4, mips32, mips32r2, mips64, parisc, arm, combined, combined-x86-power||Set processor family to generate code for.|
|<c++-template-depth>||1, 2, 3, ...||Set maximum template depth.|
|<cflags>||...||Pass flags to C compiler.|
|<cxxflags>||...||Pass flags to C++ compiler|
|<debug-symbols>||on, off||Create debug symbols.|
|<def-file>||...||Set path to
|<define>||...||Define preprocessor directives.|
|<embed-manifest>||on, off||Embed manifest (specific to msvc toolset).|
|<host-os>||aix, bsd, cygwin, darwin, freebsd, hpux, iphone, linux, netbsd, openbsd, osf, qnx, qnxnto, sgi, solaris, unix, unixware, windows||Use in conditional properties if features depend on host operating systems.|
|<include>||...||Set include directories.|
|<inlining>||off, on, full||Inline functions.|
|<library>||...||Link to a library (use in
|<link>||shared, static||Link to shared or static version of a library.|
|<linkflags>||...||Pass flags to linker.|
|<location>||...||Set directory (use in
|<name>||...||Set basename of a library (use in
|<optimization>||off, speed, space||Generate optimized code.|
|<profiling>||off, on||Generate profiled code.|
|<runtime-link>||shared, static||Link to single-threaded or thread-safe runtime library.|
|<search>||...||Set directory to search for libraries (use in
|<source>||...||Set source in requirements parameter of
|<target-os>||aix, appletv, bsd, cygwin, darwin, freebsd, hpux, iphone, linux, netbsd, openbsd, osf, qnx, qnxnto, sgi, solaris, unix, unixware, windows||Use in conditional properties if features depend on target operating systems.|
|<threading>||single, multi||Build singlethreaded or thread-safe version.|
|<toolset>||gcc, msvc, intel-linux, intel-win, acc, borland, como-linux, cw, dmc, hp_cxx, sun||Use in conditional properties if features depend on toolsets.|
|<undef>||...||Undefine preprocessor directives.|
|<use>||...||Take over only usage requirements of a referenced target but don't do anything else.|
|<variant>||debug, release, profile||Build debug, release or profile version.|
|<warnings>||on, all, off||Switch off warnings.|
|<warnings-as-errors>||off, on||Treat warnings as errors.|
For a complete and up-to-date reference of Boost.Build features look
up the file
builtin.jam in the
tools of your Boost.Build
installation. Search for lines starting with
feature.feature - this is the internal rule used to
Copyright Boris Schäling 2009. Distributed under the Boost Software License, Version 1.0. (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)