Boost C++ Libraries

...one of the most highly regarded and expertly designed C++ library projects in the world. Herb Sutter and Andrei Alexandrescu, C++ Coding Standards

This is an old version of boost. Click here for the latest version's documentation home page.

Boost.Regex

Localisation




Boost.regex provides extensive support for run-time localization, the localization model used can be split into two parts: front-end and back-end.

Front-end localization deals with everything which the user sees - error messages, and the regular expression syntax itself. For example a French application could change [[:word:]] to [[:mot:]] and \w to \m. Modifying the front end locale requires active support from the developer, by providing the library with a message catalogue to load, containing the localized strings. Front-end locale is affected by the LC_MESSAGES category only.

Back-end localization deals with everything that occurs after the expression has been parsed - in other words everything that the user does not see or interact with directly. It deals with case conversion, collation, and character class membership. The back-end locale does not require any intervention from the developer - the library will acquire all the information it requires for the current locale from the underlying operating system / run time library. This means that if the program user does not interact with regular expressions directly - for example if the expressions are embedded in your C++ code - then no explicit localization is required, as the library will take care of everything for you. For example embedding the expression [[:word:]]+ in your code will always match a whole word, if the program is run on a machine with, for example, a Greek locale, then it will still match a whole word, but in Greek characters rather than Latin ones. The back-end locale is affected by the LC_TYPE and LC_COLLATE categories.

There are three separate localization mechanisms supported by boost.regex:

Win32 localization model.

This is the default model when the library is compiled under Win32, and is encapsulated by the traits class w32_regex_traits. When this model is in effect each basic_regex object gets it's own LCID, by default this is the users default setting as returned by GetUserDefaultLCID, but you can call imbue on the basic_regex object to set it's locale to some other LCID if you wish. All the settings used by boost.regex are acquired directly from the operating system bypassing the C run time library. Front-end localization requires a resource dll, containing a string table with the user-defined strings. The traits class exports the function:

static std::string set_message_catalogue(const std::string& s);

which needs to be called with a string identifying the name of the resource dll, before your code compiles any regular expressions (but not necessarily before you construct any basic_regex instances):

boost::w32_regex_traits<char>::set_message_catalogue("mydll.dll");

The library provides full Unicode support under NT, under Windows 9x the library degrades gracefully - characters 0 to 255 are supported, the remainder are treated as "unknown" graphic characters.

C localization model.

This model has been deprecated in favor of the C++ localoe for all non-Windows compilers that support it.  This locale is encapsulated by the traits class c_regex_traits, Win32 users can force this model to take effect by defining the pre-processor symbol BOOST_REGEX_USE_C_LOCALE. When this model is in effect there is a single global locale, as set by setlocale. All settings are acquired from your run time library, consequently Unicode support is dependent upon your run time library implementation.

Front end localization is not supported.

Note that calling setlocale invalidates all compiled regular expressions, calling setlocale(LC_ALL, "C") will make this library behave equivalent to most traditional regular expression libraries including version 1 of this library.

C++ localization model.

This model is the default for non-Windows compilers.

When this model is in effect each instance of basic_regex<> has its own instance of std::locale, class basic_regex<> also has a member function imbue which allows the locale for the expression to be set on a per-instance basis. Front end localization requires a POSIX message catalogue, which will be loaded via the std::messages facet of the expression's locale, the traits class exports the symbol:

static std::string set_message_catalogue(const std::string& s);

which needs to be called with a string identifying the name of the message catalogue, before your code compiles any regular expressions (but not necessarily before you construct any basic_regex instances):

boost::cpp_regex_traits<char>::set_message_catalogue("mycatalogue");

Note that calling basic_regex<>::imbue will invalidate any expression currently compiled in that instance of basic_regex<>.

Finally note that if you build the library with a non-default localization model, then the appropriate pre-processor symbol (BOOST_REGEX_USE_C_LOCALE or BOOST_REGEX_USE_CPP_LOCALE) must be defined both when you build the support library, and when you include <boost/regex.hpp> or <boost/cregex.hpp> in your code. The best way to ensure this is to add the #define to <boost/regex/user.hpp>.

Providing a message catalogue:

In order to localize the front end of the library, you need to provide the library with the appropriate message strings contained either in a resource dll's string table (Win32 model), or a POSIX message catalogue (C++ models). In the latter case the messages must appear in message set zero of the catalogue. The messages and their id's are as follows:
 

  Message id Meaning Default value  
  101 The character used to start a sub-expression. "("  
  102 The character used to end a sub-expression declaration. ")"  
  103 The character used to denote an end of line assertion. "$"  
  104 The character used to denote the start of line assertion. "^"  
  105 The character used to denote the "match any character expression". "."  
  106 The match zero or more times repetition operator. "*"  
  107 The match one or more repetition operator. "+"  
  108 The match zero or one repetition operator. "?"  
  109 The character set opening character. "["  
  110 The character set closing character. "]"  
  111 The alternation operator. "|"  
  112 The escape character. "\\"  
  113 The hash character (not currently used). "#"  
  114 The range operator. "-"  
  115 The repetition operator opening character. "{"  
  116 The repetition operator closing character. "}"  
  117 The digit characters. "0123456789"  
  118 The character which when preceded by an escape character represents the word boundary assertion. "b"  
  119 The character which when preceded by an escape character represents the non-word boundary assertion. "B"  
  120 The character which when preceded by an escape character represents the word-start boundary assertion. "<"  
  121 The character which when preceded by an escape character represents the word-end boundary assertion. ">"  
  122 The character which when preceded by an escape character represents any word character. "w"  
  123 The character which when preceded by an escape character represents a non-word character. "W"  
  124 The character which when preceded by an escape character represents a start of buffer assertion. "`A"  
  125 The character which when preceded by an escape character represents an end of buffer assertion. "'z"  
  126 The newline character. "\n"  
  127 The comma separator. ","  
  128 The character which when preceded by an escape character represents the bell character. "a"  
  129 The character which when preceded by an escape character represents the form feed character. "f"  
  130 The character which when preceded by an escape character represents the newline character. "n"  
  131 The character which when preceded by an escape character represents the carriage return character. "r"  
  132 The character which when preceded by an escape character represents the tab character. "t"  
  133 The character which when preceded by an escape character represents the vertical tab character. "v"  
  134 The character which when preceded by an escape character represents the start of a hexadecimal character constant. "x"  
  135 The character which when preceded by an escape character represents the start of an ASCII escape character. "c"  
  136 The colon character. ":"  
  137 The equals character. "="  
  138 The character which when preceded by an escape character represents the ASCII escape character. "e"  
  139 The character which when preceded by an escape character represents any lower case character. "l"  
  140 The character which when preceded by an escape character represents any non-lower case character. "L"  
  141 The character which when preceded by an escape character represents any upper case character. "u"  
  142 The character which when preceded by an escape character represents any non-upper case character. "U"  
  143 The character which when preceded by an escape character represents any space character. "s"  
  144 The character which when preceded by an escape character represents any non-space character. "S"  
  145 The character which when preceded by an escape character represents any digit character. "d"  
  146 The character which when preceded by an escape character represents any non-digit character. "D"  
  147 The character which when preceded by an escape character represents the end quote operator. "E"  
  148 The character which when preceded by an escape character represents the start quote operator. "Q"  
  149 The character which when preceded by an escape character represents a Unicode combining character sequence. "X"  
  150 The character which when preceded by an escape character represents any single character. "C"  
  151 The character which when preceded by an escape character represents end of buffer operator. "Z"  
  152 The character which when preceded by an escape character represents the continuation assertion. "G"  
  153 The character which when preceeded by (? indicates a zero width negated forward lookahead assert. !  


Custom error messages are loaded as follows: 

  Message ID Error message ID Default string  
  201 REG_NOMATCH "No match"  
  202 REG_BADPAT "Invalid regular expression"  
  203 REG_ECOLLATE "Invalid collation character"  
  204 REG_ECTYPE "Invalid character class name"  
  205 REG_EESCAPE "Trailing backslash"  
  206 REG_ESUBREG "Invalid back reference"  
  207 REG_EBRACK "Unmatched [ or [^"  
  208 REG_EPAREN "Unmatched ( or \\("  
  209 REG_EBRACE "Unmatched \\{"  
  210 REG_BADBR "Invalid content of \\{\\}"  
  211 REG_ERANGE "Invalid range end"  
  212 REG_ESPACE "Memory exhausted"  
  213 REG_BADRPT "Invalid preceding regular expression"  
  214 REG_EEND "Premature end of regular expression"  
  215 REG_ESIZE "Regular expression too big"  
  216 REG_ERPAREN "Unmatched ) or \\)"  
  217 REG_EMPTY "Empty expression"  
  218 REG_E_UNKNOWN "Unknown error"  


Custom character class names are loaded as followed: 

  Message ID Description Equivalent default class name  
  300 The character class name for alphanumeric characters. "alnum"  
  301 The character class name for alphabetic characters. "alpha"  
  302 The character class name for control characters. "cntrl"  
  303 The character class name for digit characters. "digit"  
  304 The character class name for graphics characters. "graph"  
  305 The character class name for lower case characters. "lower"  
  306 The character class name for printable characters. "print"  
  307 The character class name for punctuation characters. "punct"  
  308 The character class name for space characters. "space"  
  309 The character class name for upper case characters. "upper"  
  310 The character class name for hexadecimal characters. "xdigit"  
  311 The character class name for blank characters. "blank"  
  312 The character class name for word characters. "word"  
  313 The character class name for Unicode characters. "unicode"  


Finally, custom collating element names are loaded starting from message id 400, and terminating when the first load thereafter fails. Each message looks something like: "tagname string" where tagname is the name used inside [[.tagname.]] and string is the actual text of the collating element. Note that the value of collating element [[.zero.]] is used for the conversion of strings to numbers - if you replace this with another value then that will be used for string parsing - for example use the Unicode character 0x0660 for [[.zero.]] if you want to use Unicode Arabic-Indic digits in your regular expressions in place of Latin digits.

Note that the POSIX defined names for character classes and collating elements are always available - even if custom names are defined, in contrast, custom error messages, and custom syntax messages replace the default ones.


Revised  26 June 2004 

Copyright John Maddock 1998- 2004

Use, modification and distribution are subject to the Boost Software License, Version 1.0. (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)