 Boost C++ Libraries

...one of the most highly regarded and expertly designed C++ library projects in the world.

Rounding Policies

In order to be as general as possible, the library uses a class to compute all the necessary functions rounded upward or downward. This class is the first parameter of policies, it is also the type named rounding in the policy definition of interval.

By default, it is interval_lib::rounded_math<T>. The class interval_lib::rounded_math is already specialized for the standard floating types (float , double and long double). So if the base type of your intervals is not one of these, a good solution would probably be to provide a specialization of this class. But if the default specialization of rounded_math<T> for float, double, or long double is not what you seek, or you do not want to specialize interval_lib::rounded_math<T> (say because you prefer to work in your own namespace) you can also define your own rounding policy and pass it directly to interval_lib::policies.

Requirements

Here comes what the class is supposed to provide. The domains are written next to their respective functions (as you can see, the functions do not have to worry about invalid values, but they have to handle infinite arguments).

/* Rounding requirements */
struct rounding {
// default constructor, destructor
rounding();
~rounding();
// mathematical operations
T add_up  (T, T); // [-∞;+∞][-∞;+∞]
T sub_down(T, T); // [-∞;+∞][-∞;+∞]
T sub_up  (T, T); // [-∞;+∞][-∞;+∞]
T mul_down(T, T); // [-∞;+∞][-∞;+∞]
T mul_up  (T, T); // [-∞;+∞][-∞;+∞]
T div_down(T, T); // [-∞;+∞]([-∞;+∞]-{0})
T div_up  (T, T); // [-∞;+∞]([-∞;+∞]-{0})
T sqrt_down(T);   // ]0;+∞]
T sqrt_up  (T);   // ]0;+∞]
T exp_down(T);    // [-∞;+∞]
T exp_up  (T);    // [-∞;+∞]
T log_down(T);    // ]0;+∞]
T log_up  (T);    // ]0;+∞]
T cos_down(T);    // [0;2π]
T cos_up  (T);    // [0;2π]
T tan_down(T);    // ]-π/2;π/2[
T tan_up  (T);    // ]-π/2;π/2[
T asin_down(T);   // [-1;1]
T asin_up  (T);   // [-1;1]
T acos_down(T);   // [-1;1]
T acos_up  (T);   // [-1;1]
T atan_down(T);   // [-∞;+∞]
T atan_up  (T);   // [-∞;+∞]
T sinh_down(T);   // [-∞;+∞]
T sinh_up  (T);   // [-∞;+∞]
T cosh_down(T);   // [-∞;+∞]
T cosh_up  (T);   // [-∞;+∞]
T tanh_down(T);   // [-∞;+∞]
T tanh_up  (T);   // [-∞;+∞]
T asinh_down(T);  // [-∞;+∞]
T asinh_up  (T);  // [-∞;+∞]
T acosh_down(T);  // [1;+∞]
T acosh_up  (T);  // [1;+∞]
T atanh_down(T);  // [-1;1]
T atanh_up  (T);  // [-1;1]
T median(T, T);   // [-∞;+∞][-∞;+∞]
T int_down(T);    // [-∞;+∞]
T int_up  (T);    // [-∞;+∞]
// conversion functions
T conv_down(U);
T conv_up  (U);
// unprotected rounding class
typedef ... unprotected_rounding;
};

The constructor and destructor of the rounding class have a very important semantic requirement: they are responsible for setting and resetting the rounding modes of the computation on T. For instance, if T is a standard floating point type and floating point computation is performed according to the Standard IEEE 754, the constructor can save the current rounding state, each _up (resp. _down) function will round up (resp. down), and the destructor will restore the saved rounding state. Indeed this is the behavior of the default rounding policy.

The meaning of all the mathematical functions up until atanh_up is clear: each function returns number representable in the type T which is a lower bound (for _down) or upper bound (for _up) on the true mathematical result of the corresponding function. The function median computes the average of its two arguments rounded to its nearest representable number. The functions int_down and int_up compute the nearest integer smaller or bigger than their argument. Finally, conv_down and conv_up are responsible of the conversions of values of other types to the base number type: the first one must round down the value and the second one must round it up.

The type unprotected_rounding allows to remove all controls. For reasons why one might to do this, see the protection paragraph below.

Overview of the provided classes

A lot of classes are provided. The classes are organized by level. At the bottom is the class rounding_control. At the next level come rounded_arith_exact, rounded_arith_std and rounded_arith_opp. Then there are rounded_transc_dummy, rounded_transc_exact, rounded_transc_std and rounded_transc_opp. And finally are save_state and save_state_nothing. Each of these classes provide a set of members that are required by the classes of the next level. For example, a rounded_transc_... class needs the members of a rounded_arith_... class.

When they exist in two versions _std and _opp, the first one does switch the rounding mode each time, and the second one tries to keep it oriented toward plus infinity. The main purpose of the _opp version is to speed up the computations through the use of the "opposite trick" (see the performance notes). This version requires the rounding mode to be upward before entering any computation functions of the class. It guarantees that the rounding mode will still be upward at the exit of the functions.

Please note that it is really a very bad idea to mix the _opp version with the _std since they do not have compatible properties.

There is a third version named _exact which computes the functions without changing the rounding mode. It is an "exact" version because it is intended for a base type that produces exact results.

The last version is the _dummy version. It does not do any computations but still produces compatible results.

Please note that it is possible to use the "exact" version for an inexact base type, e.g. float or double. In that case, the inclusion property is no longer guaranteed, but this can be useful to speed up the computation when the inclusion property is not desired strictly. For instance, in computer graphics, a small error due to floating-point roundoff is acceptable as long as an approximate version of the inclusion property holds.

Here comes what each class defines. Later, when they will be described more thoroughly, these members will not be repeated. Please come back here in order to see them. Inheritance is also used to avoid repetitions.

template <class T>
struct rounding_control
{
typedef ... rounding_mode;
void set_rounding_mode(rounding_mode);
void get_rounding_mode(rounding_mode&);
void downward ();
void upward   ();
void to_nearest();
T to_int(T);
T force_rounding(T);
};

template <class T, class Rounding>
struct rounded_arith_... : Rounding
{
void init();
T sub_down(T, T);
T sub_up  (T, T);
T mul_down(T, T);
T mul_up  (T, T);
T div_down(T, T);
T div_up  (T, T);
T sqrt_down(T);
T sqrt_up  (T);
T median(T, T);
T int_down(T);
T int_up  (T);
};

template <class T, class Rounding>
struct rounded_transc_... : Rounding
{
T exp_down(T);
T exp_up  (T);
T log_down(T);
T log_up  (T);
T cos_down(T);
T cos_up  (T);
T tan_down(T);
T tan_up  (T);
T asin_down(T);
T asin_up  (T);
T acos_down(T);
T acos_up  (T);
T atan_down(T);
T atan_up  (T);
T sinh_down(T);
T sinh_up  (T);
T cosh_down(T);
T cosh_up  (T);
T tanh_down(T);
T tanh_up  (T);
T asinh_down(T);
T asinh_up  (T);
T acosh_down(T);
T acosh_up  (T);
T atanh_down(T);
T atanh_up  (T);
};

template <class Rounding>
struct save_state_... : Rounding
{
save_state_...();
~save_state_...();
typedef ... unprotected_rounding;
};

Synopsis

namespace boost {
namespace numeric {
namespace interval_lib {

/* basic rounding control */
template <class T>  struct rounding_control;

/* arithmetic functions rounding */
template <class T, class Rounding = rounding_control<T> > struct rounded_arith_exact;
template <class T, class Rounding = rounding_control<T> > struct rounded_arith_std;
template <class T, class Rounding = rounding_control<T> > struct rounded_arith_opp;

/* transcendental functions rounding */
template <class T, class Rounding> struct rounded_transc_dummy;
template <class T, class Rounding = rounded_arith_exact<T> > struct rounded_transc_exact;
template <class T, class Rounding = rounded_arith_std<T> > struct rounded_transc_std;
template <class T, class Rounding = rounded_arith_opp<T> > struct rounded_transc_opp;

/* rounding-state-saving classes */
template <class Rounding> struct save_state;
template <class Rounding> struct save_state_nothing;

/* default policy for type T */
template <class T>  struct rounded_math;
template <>  struct rounded_math<float>;
template <>  struct rounded_math<double>;

/* some metaprogramming to convert a protected to unprotected rounding */
template <class I> struct unprotect;

} // namespace interval_lib
} // namespace numeric
} // namespace boost

Description of the provided classes

We now describe each class in the order they appear in the definition of a rounding policy (this outermost-to-innermost order is the reverse order from the synopsis).

Protection control

Protection refers to the fact that the interval operations will be surrounded by rounding mode controls. Unprotecting a class means to remove all the rounding controls. Each rounding policy provides a type unprotected_rounding. The required type unprotected_rounding gives another rounding class that enables to work when nested inside rounding. For example, the first three lines below should all produce the same result (because the first operation is the rounding constructor, and the last is its destructor, which take care of setting the rounding modes); and the last line is allowed to have an undefined behavior (since no rounding constructor or destructor is ever called).

T c; { rounding rnd; c = rnd.add_down(a, b); }
T c; { rounding rnd1; { rounding rnd2; c = rnd2.add_down(a, b); } }
T c; { rounding rnd1; { rounding::unprotected_rounding rnd2; c = rnd2.add_down(a, b); } }
T d; { rounding::unprotected_rounding rnd; d = rnd.add_down(a, b); }

Naturally rounding::unprotected_rounding may simply be rounding itself. But it can improve performance if it is a simplified version with empty constructor and destructor. In order to avoid undefined behaviors, in the library, an object of type rounding::unprotected_rounding is guaranteed to be created only when an object of type rounding is already alive. See the performance notes for some additional details.

The support library defines a metaprogramming class template unprotect which takes an interval type I and returns an interval type unprotect<I>::type where the rounding policy has been unprotected. Some information about the types: interval<T, interval_lib::policies<Rounding, _> >::traits_type::rounding is the same type as Rounding, and unprotect<interval<T, interval_lib::policies<Rounding, _> > >::type is the same type as interval<T, interval_lib::policies<Rounding::unprotected, _> >.

State saving

First comes save_state. This class is responsible for saving the current rounding mode and calling init in its constructor, and for restoring the saved rounding mode in its destructor. This class also defines the unprotected_rounding type.

If the rounding mode does not require any state-saving or initialization, save_state_nothing can be used instead of save_state.

Transcendental functions

The classes rounded_transc_exact, rounded_transc_std and rounded_transc_opp expect the std namespace to provide the functions exp log cos tan acos asin atan cosh sinh tanh acosh asinh atanh. For the _std and _opp versions, all these functions should respect the current rounding mode fixed by a call to downward or upward.

Please note: Unfortunately, the latter is rarely the case. It is the reason why a class rounded_transc_dummy is provided which does not depend on the functions from the std namespace. There is no magic, however. The functions of rounded_transc_dummy do not compute anything. They only return valid values. For example, cos_down always returns -1. In this way, we do verify the inclusion property for the default implementation, even if this has strictly no value for the user. In order to have useful values, another policy should be used explicitely, which will most likely lead to a violation of the inclusion property. In this way, we ensure that the violation is clearly pointed out to the user who then knows what he stands against. This class could have been used as the default transcendental rounding class, but it was decided it would be better for the compilation to fail due to missing declarations rather than succeed thanks to valid but unusable functions.

Basic arithmetic functions

The classes rounded_arith_std and rounded_arith_opp expect the operators + - * / and the function std::sqrt to respect the current rounding mode.

The class rounded_arith_exact requires std::floor and std::ceil to be defined since it can not rely on to_int.

Rounding control

The functions defined by each of the previous classes did not need any explanation. For example, the behavior of add_down is to compute the sum of two numbers rounded downward. For rounding_control, the situation is a bit more complex.

The basic function is force_rounding which returns its argument correctly rounded accordingly to the current rounding mode if it was not already the case. This function is necessary to handle delayed rounding. Indeed, depending on the way the computations are done, the intermediate results may be internally stored in a more precise format and it can lead to a wrong rounding. So the function enforces the rounding. Here is an example of what happens when the rounding is not enforced.

The function get_rounding_mode returns the current rounding mode, set_rounding_mode sets the rounding mode back to a previous value returned by get_rounding_mode. downward, upward and to_nearest sets the rounding mode in one of the three directions. This rounding mode should be global to all the functions that use the type T. For example, after a call to downward, force_rounding(x+y) is expected to return the sum rounded toward -∞.

The function to_int computes the nearest integer accordingly to the current rounding mode.

The non-specialized version of rounding_control does not do anything. The functions for the rounding mode are empty, and to_int and force_rounding are identity functions. The pi_ constant functions return suitable integers (for example, pi_up returns T(4)).

The class template rounding_control is specialized for float, double and long double in order to best use the floating point unit of the computer.

Template class rounded_math

The default policy (aka rounded_math<T>) is simply defined as:

template <class T> struct rounded_math<T> : save_state_nothing<rounded_arith_exact<T> > {};

and the specializations for float, double and long double use rounded_arith_opp, as in:

template <> struct rounded_math<float>       : save_state<rounded_arith_opp<float> >       {};
template <> struct rounded_math<double>      : save_state<rounded_arith_opp<double> >      {};
template <> struct rounded_math<long double> : save_state<rounded_arith_opp<long double> > {};

Performance Issues

This paragraph deals mostly with the performance of the library with intervals using the floating-point unit (FPU) of the computer. Let's consider the sum of [a,b] and [c,d] as an example. The result is [down(a+c), up(b+d)], where down and up indicate the rounding mode needed.

Rounding Mode Switch

If the FPU is able to use a different rounding mode for each operation, there is no problem. For example, it's the case for the Alpha processor: each floating-point instruction can specify a different rounding mode. However, the IEEE-754 Standard does not require such a behavior. So most of the FPUs only provide some instructions to set the rounding mode for all subsequent operations. And generally, these instructions need to flush the pipeline of the FPU.

In this situation, the time needed to sum [a,b] and [c,d] is far worse than the time needed to calculate a+b and c+d since the two additions cannot be parallelized. Consequently, the objective is to diminish the number of rounding mode switches.

If this library is not used to provide exact computations, but only for pair arithmetic, the solution is quite simple: do not use rounding. In that case, doing the sum [a,b] and [c,d] will be as fast as computing a+b and c+d. Everything is perfect.

However, if exact computations are required, such a solution is totally unthinkable. So, are we penniless? No, there is still a trick available. Indeed, down(a+c) = -up(-a-c) if the unary minus is an exact operation. It is now possible to calculate the whole sum with the same rounding mode. Generally, the cost of the mode switching is worse than the cost of the sign changes.

Speeding up consecutive operations

The interval addition is not the only operation; most of the interval operations can be computed by setting the rounding direction of the FPU only once. So the operations of the floating point rounding policy assume that the direction is correctly set. This assumption is usually not true in a program (the user and the standard library expect the rounding direction to be to nearest), so these operations have to be enclosed in a shell that sets the floating point environment. This protection is done by the constructor and destructor of the rounding policy.

Les us now consider the case of two consecutive interval additions: [a,b] + [c,d] + [e,f]. The generated code should look like:

init_rounding_mode();    // rounding object construction during the first addition
t1 = -(-a - c);
t2 = b + d;
restore_rounding_mode(); // rounding object destruction
init_rounding_mode();    // rounding object construction during the second addition
x = -(-t1 - e);
y = t2 + f;
restore_rounding_mode(); // rounding object destruction
// the result is the interval [x,y]

Between the two operations, the rounding direction is restored, and then initialized again. Ideally, compilers should be able to optimize this useless code away. But unfortunately they are not, and this slows the code down by an order of magnitude. In order to avoid this bottleneck, the user can tell to the interval operations that they do not need to be protected anymore. It will then be up to the user to protect the interval computations. The compiler will then be able to generate such a code:

init_rounding_mode();    // done by the user
x = -(-a - c - e);
y = b + d + f;
restore_rounding_mode(); // done by the user

The user will have to create a rounding object. And as long as this object is alive, unprotected versions of the interval operations can be used. They are selected by using an interval type with a specific rounding policy. If the initial interval type is I, then I::traits_type::rounding is the type of the rounding object, and interval_lib::unprotect<I>::type is the type of the unprotected interval type.

Because the rounding mode of the FPU is changed during the life of the rounding object, any arithmetic floating point operation that does not involve the interval library can lead to unexpected results. And reciprocally, using unprotected interval operation when no rounding object is alive will produce intervals that are not guaranteed anymore to contain the real result.

Example

Here is an example of Horner's scheme to compute the value of a polynom. The rounding mode switches are disabled for the whole computation.

// I is an interval class, the polynom is a simple array
template<class I>
I horner(const I& x, const I p[], int n) {

// save and initialize the rounding mode
typename I::traits_type::rounding rnd;

// define the unprotected version of the interval type
typedef typename boost::numeric::interval_lib::unprotect<I>::type R;

const R& a = x;
R y = p[n - 1];
for(int i = n - 2; i >= 0; i--) {
y = y * a + (const R&)(p[i]);
}
return y;

// restore the rounding mode with the destruction of rnd
}

Please note that a rounding object is specially created in order to protect all the interval computations. Each interval of type I is converted in an interval of type R before any operations. If this conversion is not done, the result is still correct, but the interest of this whole optimization has disappeared. Whenever possible, it is good to convert to const R& instead of R: indeed, the function could already be called inside an unprotection block so the types R and I would be the same interval, no need for a conversion.

Uninteresting remark

It was said at the beginning that the Alpha processors can use a specific rounding mode for each operation. However, due to the instruction format, the rounding toward plus infinity is not available. Only the rounding toward minus infinity can be used. So the trick using the change of sign becomes essential, but there is no need to save and restore the rounding mode on both sides of an operation.

Extended Registers

There is another problem besides the cost of the rounding mode switch. Some FPUs use extended registers (for example, float computations will be done with double registers, or double computations with long double registers). Consequently, many problems can arise.

The first one is due to to the extended precision of the mantissa. The rounding is also done on this extended precision. And consequently, we still have down(a+b) = -up(-a-b) in the extended registers. But back to the standard precision, we now have down(a+b) < -up(-a-b) instead of an equality. A solution could be not to use this method. But there still are other problems, with the comparisons between numbers for example.

Naturally, there is also a problem with the extended precision of the exponent. To illustrate this problem, let m be the biggest number before +inf. If we calculate 2*[m,m], the answer should be [m,inf]. But due to the extended registers, the FPU will first store [2m,2m] and then convert it to [inf,inf] at the end of the calculus (when the rounding mode is toward +inf). So the answer is no more accurate.

There is only one solution: to force the FPU to convert the extended values back to standard precision after each operation. Some FPUs provide an instruction able to do this conversion (for example the PowerPC processors). But for the FPUs that do not provide it (the x86 processors), the only solution is to write the values to memory and read them back. Such an operation is obviously very expensive.

Some Examples

Here come several cases:

• if you need precise computations with the float or double types, use the default rounded_math<T>;
• for fast wide intervals without any rounding nor precision, use save_state_nothing<rounded_transc_exact<T> >;
• for an exact type (like int or rational with a little help for infinite and NaN values) without support for transcendental functions, the solution could be save_state_nothing<rounded_transc_dummy<T, rounded_arith_exact<T> > > or directly save_state_nothing<rounded_arith_exact<T> >;
• if it is a more complex case than the previous ones, the best thing is probably to directly define your own policy. Revised 2006-12-24