Boost C++ Libraries

...one of the most highly regarded and expertly designed C++ library projects in the world. Herb Sutter and Andrei Alexandrescu, C++ Coding Standards

This is the documentation for an old version of Boost. Click here to view this page for the latest version.
PrevUpHomeNext

Lambda expressions

Generic attribute placeholder
Defining attribute keywords
Record placeholder
Message text placeholders
Predicate expressions
Formatting expressions

As it was pointed out in tutorial, filters and formatters can be specified as Lambda expressions with placeholders for attribute values. This section will describe the placeholders that can be used to build more complex Lambda expressions.

There is also a way to specify the filter in the form of a string template. This can be useful for initialization from the application settings. This part of the library is described here.

#include <boost/log/expressions/attr_fwd.hpp>
#include <boost/log/expressions/attr.hpp>

The attr placeholder represents an attribute value in template expressions. Given the record view or a set of attribute values, the placeholder will attempt to extract the specified attribute value from the argument upon invocation. This can be roughly described with the following pseudo-code:

logging::value_ref< T, TagT > val = expr::attr< T, TagT >(name)(rec);

where val is the reference to the extracted value, name and T are the attribute value name and type, TagT is an optional tag (we'll return to it in a moment) and rec is the log record view or attribute value set. T can be a Boost.MPL type sequence with possible expected types of the value; the extraction will succeed if the type of the value matches one of the types in the sequence.

The attr placeholder can be used in Boost.Phoenix expressions, including the bind expression.

bool my_filter(logging::value_ref< severity_level, tag::severity > const& level,
               logging::value_ref< std::string, tag::tag_attr > const& tag)
{
    return level >= warning || tag == "IMPORTANT_MESSAGE";
}

void init()
{
    // ...

    namespace phoenix = boost::phoenix;
    sink->set_filter(phoenix::bind(&my_filter, severity.or_none(), tag_attr.or_none()));

    // ...
}

The placeholder can be used both in filters and formatters:

sink->set_filter
(
    expr::attr< int >("Severity") >= 5 &&
    expr::attr< std::string >("Channel") == "net"
);

sink->set_formatter
(
    expr::stream
        << expr::attr< int >("Severity")
        << " [" << expr::attr< std::string >("Channel") << "] "
        << expr::smessage
);

The call to set_filter registers a composite filter that consists of two elementary subfilters: the first one checks the severity level, and the second checks the channel name. The call to set_formatter installs a formatter that composes a string containing the severity level and the channel name along with the message text.

By default, when the requested attribute value is not found in the record, attr will return an empty reference. In case of filters, this will result in false in any ordering expressions, and in case of formatters the output from the placeholder will be empty. This behavior can be changed:

sink->set_filter
(
    expr::attr< int >("Severity").or_throw() >= 5 &&
    expr::attr< std::string >("Channel").or_throw() == "net"
);
  • To use a default value instead. Add the or_default modifier with the desired default value:
sink->set_filter
(
    expr::attr< int >("Severity").or_default(0) >= 5 &&
    expr::attr< std::string >("Channel").or_default(std::string("general")) == "net"
);
[Tip] Tip

You can also use the has_attr predicate to implement filters and formatters conditional on the attribute value presence.

The default behavior is also accessible through the or_none modifier. The modified placeholders can be used in filters and formatters just the same way as the unmodified ones.

In bind expressions, the bound function object will still receive the value_ref-wrapped values in place of the modified attr placeholder. Even though both or_throw and or_default modifiers guarantee that the bound function will receive a filled reference, value_ref is still needed if the value type is specified as a type sequence. Also, the reference wrapper may contain a tag type which may be useful for formatting customization.

The TagT type in the abstract description of attr above is optional and by default is void. This is an attribute tag which can be used to customize the output formatters produce for different attributes. This tag is forwarded to the to_log manipulator when the extracted attribute value is put to a stream (this behavior is warranted by value_ref implementation). Here's a quick example:

// We define our own severity levels
enum severity_level
{
    normal,
    notification,
    warning,
    error,
    critical
};

// The operator is used for regular stream formatting
std::ostream& operator<< (std::ostream& strm, severity_level level)
{
    static const char* strings[] =
    {
        "normal",
        "notification",
        "warning",
        "error",
        "critical"
    };

    if (static_cast< std::size_t >(level) < sizeof(strings) / sizeof(*strings))
        strm << strings[level];
    else
        strm << static_cast< int >(level);

    return strm;
}

// Attribute value tag type
struct severity_tag;

// The operator is used when putting the severity level to log
logging::formatting_ostream& operator<<
(
    logging::formatting_ostream& strm,
    logging::to_log_manip< severity_level, severity_tag > const& manip
)
{
    static const char* strings[] =
    {
        "NORM",
        "NTFY",
        "WARN",
        "ERRR",
        "CRIT"
    };

    severity_level level = manip.get();
    if (static_cast< std::size_t >(level) < sizeof(strings) / sizeof(*strings))
        strm << strings[level];
    else
        strm << static_cast< int >(level);

    return strm;
}

void init()
{
    logging::add_console_log
    (
        std::clog,
        // This makes the sink to write log records that look like this:
        // 1: <NORM> A normal severity message
        // 2: <ERRR> An error severity message
        keywords::format =
        (
            expr::stream
                << expr::attr< unsigned int >("LineID")
                << ": <" << expr::attr< severity_level, severity_tag >("Severity")
                << "> " << expr::smessage
        )
    );
}

See the complete code.

Here we specify a different formatting operator for the severity level wrapped in the to_log_manip manipulator marked with the tag severity_tag. This operator will be called when log records are formatted while the regular operator<< will be used in other contexts.

#include <boost/log/expressions/keyword_fwd.hpp>
#include <boost/log/expressions/keyword.hpp>

Attribute keywords can be used as replacements for the attr placeholders in filters and formatters while providing a more concise and less error prone syntax. An attribute keyword can be declared with the BOOST_LOG_ATTRIBUTE_KEYWORD macro:

BOOST_LOG_ATTRIBUTE_KEYWORD(keyword, "Keyword", type)

Here the macro declares a keyword keyword for an attribute named "Keyword" with the value type of type. Additionally, the macro defines an attribute tag type keyword within the tag namespace. We can rewrite the previous example in the following way:

// We define our own severity levels
enum severity_level
{
    normal,
    notification,
    warning,
    error,
    critical
};

// Define the attribute keywords
BOOST_LOG_ATTRIBUTE_KEYWORD(line_id, "LineID", unsigned int)
BOOST_LOG_ATTRIBUTE_KEYWORD(severity, "Severity", severity_level)

// The operator is used for regular stream formatting
std::ostream& operator<< (std::ostream& strm, severity_level level)
{
    static const char* strings[] =
    {
        "normal",
        "notification",
        "warning",
        "error",
        "critical"
    };

    if (static_cast< std::size_t >(level) < sizeof(strings) / sizeof(*strings))
        strm << strings[level];
    else
        strm << static_cast< int >(level);

    return strm;
}

// The operator is used when putting the severity level to log
logging::formatting_ostream& operator<<
(
    logging::formatting_ostream& strm,
    logging::to_log_manip< severity_level, tag::severity > const& manip
)
{
    static const char* strings[] =
    {
        "NORM",
        "NTFY",
        "WARN",
        "ERRR",
        "CRIT"
    };

    severity_level level = manip.get();
    if (static_cast< std::size_t >(level) < sizeof(strings) / sizeof(*strings))
        strm << strings[level];
    else
        strm << static_cast< int >(level);

    return strm;
}

void init()
{
    logging::add_console_log
    (
        std::clog,
        // This makes the sink to write log records that look like this:
        // 1: <NORM> A normal severity message
        // 2: <ERRR> An error severity message
        keywords::format =
        (
            expr::stream
                << line_id
                << ": <" << severity
                << "> " << expr::smessage
        )
    );
}

Attribute keywords behave the same way as the attr placeholders and can be used both in filters and formatters. The or_throw and or_default modifiers are also supported.

Keywords can also be used in attribute value lookup expressions in log records and attribute value sets:

void print_severity(logging::record_view const& rec)
{
    logging::value_ref< severity_level, tag::severity > level = rec[severity];
    std::cout << level << std::endl;
}

#include <boost/log/expressions/record.hpp>

The record placeholder can be used in bind expressions to pass the whole log record view to the bound function object.

void my_formatter(logging::formatting_ostream& strm, logging::record_view const& rec)
{
    // ...
}

namespace phoenix = boost::phoenix;
sink->set_formatter(phoenix::bind(&my_formatter, expr::stream, expr::record));
[Note] Note

In case of filters, the placeholder will correspond to the set of attribute values rather than the log record itself. This is because the record is not constructed yet at the point of filtering, and filters only operate on the set of attribute values.

#include <boost/log/expressions/message.hpp>

Log records typically contain a special attribute "Message" with the value of one of the string types (more specifically, an std::basic_string specialization). This attribute contains the text of the log message that is constructed at the point of the record creation. This attribute is only constructed after filtering, so filters cannot use it. There are several keywords to access this attribute value:

  • smessage - the attribute value is expected to be an std::string
  • wmessage - the attribute value is expected to be an std::wstring
  • message - the attribute value is expected to be an std::string or std::wstring

The message keyword has to dispatch between different string types, so it is slightly less efficient than the other two keywords. If the application is able to guarantee the fixed character type of log messages, it is advised to use the corresponding keyword for better performance.

// Sets up a formatter that will ignore all attributes and only print log record text
sink->set_formatter(expr::stream << expr::message);

This section describes several expressions that can be used as predicates in the filtering expressions.

#include <boost/log/expressions/predicates/has_attr.hpp>

The filter has_attr checks if an attribute value with the specified name and, optionally, type is attached to a log record. If no type specified to the filter, the filter returns true if any value with the specified name is found. If an MPL-compatible type sequence in specified as a value type, the filter returns true if a value with the specified name and one of the specified types is found.

This filter is usually used in conjunction with conditional formatters, but it also can be used as a quick filter based on the log record structure. For example, one can use this filter to extract statistic records and route them to a specific sink.

// Declare attribute keywords
BOOST_LOG_ATTRIBUTE_KEYWORD(stat_stream, "StatisticStream", std::string)
BOOST_LOG_ATTRIBUTE_KEYWORD(change, "Change", int)

// A simple sink backend to accumulate statistic information
class my_stat_accumulator :
    public sinks::basic_sink_backend< sinks::synchronized_feeding >
{
    // A map of accumulated statistic values,
    // ordered by the statistic information stream name
    typedef std::map< std::string, int > stat_info_map;
    stat_info_map m_stat_info;

public:
    // Destructor
    ~my_stat_accumulator()
    {
        // Display the accumulated data
        stat_info_map::const_iterator it = m_stat_info.begin(), end = m_stat_info.end();
        for (; it != end; ++it)
        {
            std::cout << "Statistic stream: " << it->first
                << ", accumulated value: " << it->second << "\n";
        }
        std::cout.flush();
    }

    // The method is called for every log record being put into the sink backend
    void consume(logging::record_view const& rec)
    {
        // First, acquire statistic information stream name
        logging::value_ref< std::string, tag::stat_stream > name = rec[stat_stream];
        if (name)
        {
            // Next, get the statistic value change
            logging::value_ref< int, tag::change > change_amount = rec[change];
            if (change_amount)
            {
                // Accumulate the statistic data
                m_stat_info[name.get()] += change_amount.get();
            }
        }
    }
};

// The function registers two sinks - one for statistic information,
// and another one for other records
void init()
{
    boost::shared_ptr< logging::core > core = logging::core::get();

    // Create a backend and attach a stream to it
    boost::shared_ptr< sinks::text_ostream_backend > backend =
        boost::make_shared< sinks::text_ostream_backend >();
    backend->add_stream(
        boost::shared_ptr< std::ostream >(new std::ofstream("test.log")));

    // Create a frontend and setup filtering
    typedef sinks::synchronous_sink< sinks::text_ostream_backend > log_sink_type;
    boost::shared_ptr< log_sink_type > log_sink(new log_sink_type(backend));
    // All records that don't have a "StatisticStream" attribute attached
    // will go to the "test.log" file
    log_sink->set_filter(!expr::has_attr(stat_stream));

    core->add_sink(log_sink);

    // Create another sink that will receive all statistic data
    typedef sinks::synchronous_sink< my_stat_accumulator > stat_sink_type;
    boost::shared_ptr< stat_sink_type > stat_sink(new stat_sink_type());
    // All records with a "StatisticStream" string attribute attached
    // will go to the my_stat_accumulator sink
    stat_sink->set_filter(expr::has_attr(stat_stream));

    core->add_sink(stat_sink);
}

// This simple macro will simplify putting statistic data into a logger
#define PUT_STAT(lg, stat_stream_name, change)\
    if (true) {\
        BOOST_LOG_SCOPED_LOGGER_TAG(lg, "StatisticStream", stat_stream_name);\
        BOOST_LOG(lg) << logging::add_value("Change", (int)(change));\
    } else ((void)0)

void logging_function()
{
    src::logger lg;

    // Put a regular log record, it will go to the "test.log" file
    BOOST_LOG(lg) << "A regular log record";

    // Put some statistic data
    PUT_STAT(lg, "StreamOne", 10);
    PUT_STAT(lg, "StreamTwo", 20);
    PUT_STAT(lg, "StreamOne", -5);
}

See the complete code.

In this example, log records emitted with the PUT_STAT macro will be directed to the my_stat_accumulator sink backend, which will accumulate the changes passed in the "Change" attribute values. All other records (even those made through the same logger) will be passed to the filter sink. This is achieved with the mutually exclusive filters set for the two sinks.

Please note that in the example above we extended the library in two ways: we defined a new sink backend my_stat_accumulator and a new macro PUT_STAT. Also note that has_attr can accept attribute keywords to identify the attribute to check.

#include <boost/log/expressions/predicates/is_in_range.hpp>

The is_in_range predicate checks that the attribute value fits in the half-open range (i.e. it returns true if the attribute value x satisfies the following condition: left <= x < right). For example:

sink->set_filter
(
    // drops all records that have level below 3 or greater than 4
    expr::is_in_range(expr::attr< int >("Severity"), 3, 5)
);

The attribute can also be identified by an attribute keyword or name and type:

sink->set_filter
(
    expr::is_in_range(severity, 3, 5)
);

sink->set_filter
(
    expr::is_in_range< int >("Severity", 3, 5)
);
#include <boost/log/expressions/predicates/begins_with.hpp>
#include <boost/log/expressions/predicates/ends_with.hpp>
#include <boost/log/expressions/predicates/contains.hpp>

Predicates begins_with, ends_with and contains provide an easy way of matching string attribute values. As follows from their names, the functions construct filters that return true if an attribute value begins with, ends with or contains the specified substring, respectively. The string comparison is case sensitive.

sink->set_filter
(
    // selects only records that are related to Russian web domains
    expr::ends_with(expr::attr< std::string >("Domain"), ".ru")
);

The attribute can also be identified by an attribute keyword or name and type.

#include <boost/log/expressions/predicates/matches.hpp>

// Supporting headers
#include <boost/log/support/regex.hpp>
#include <boost/log/support/std_regex.hpp>
#include <boost/log/support/xpressive.hpp>
#include <boost/log/support/spirit_qi.hpp>
#include <boost/log/support/spirit_classic.hpp>

The matches function creates a filter that apples a regular expression or a parser to a string attribute value. The regular expression can be provided by Boost.Regex or Boost.Xpressive. Parsers from Boost.Spirit and Boost.Spirit2 are also supported. The filter returns true if the regular expression matches or the parser successfully parses the attribute value.

[Note] Note

In order to use this predicate, a corresponding supporting header should also be included.

sink->set_filter
(
    expr::matches(expr::attr< std::string >("Domain"), boost::regex("www\\..*\\.ru"))
);

The attribute can also be identified by an attribute keyword or name and type.

#include <boost/log/expressions/predicates/channel_severity_filter.hpp>

This filter is aimed for a specific but commonly encountered use case. The channel_severity_filter function creates a predicate that will check log record severity levels against a threshold. The predicate allows setting different thresholds for different channels. The mapping between channel names and severity thresholds can be filled in std::map style by using the subscript operator or by calling add method on the filter itself (the channel_severity_filter_actor instance). Let's see an example:

// We define our own severity levels
enum severity_level
{
    normal,
    notification,
    warning,
    error,
    critical
};

// Define the attribute keywords
BOOST_LOG_ATTRIBUTE_KEYWORD(line_id, "LineID", unsigned int)
BOOST_LOG_ATTRIBUTE_KEYWORD(severity, "Severity", severity_level)
BOOST_LOG_ATTRIBUTE_KEYWORD(channel, "Channel", std::string)


void init()
{
    // Create a minimal severity table filter
    typedef expr::channel_severity_filter_actor< std::string, severity_level > min_severity_filter;
    min_severity_filter min_severity = expr::channel_severity_filter(channel, severity);

    // Set up the minimum severity levels for different channels
    min_severity["general"] = notification;
    min_severity["network"] = warning;
    min_severity["gui"] = error;

    logging::add_console_log
    (
        std::clog,
        keywords::filter = min_severity || severity >= critical,
        keywords::format =
        (
            expr::stream
                << line_id
                << ": <" << severity
                << "> [" << channel << "] "
                << expr::smessage
        )
    );
}

// Define our logger type
typedef src::severity_channel_logger< severity_level, std::string > logger_type;

void test_logging(logger_type& lg, std::string const& channel_name)
{
    BOOST_LOG_CHANNEL_SEV(lg, channel_name, normal) << "A normal severity level message";
    BOOST_LOG_CHANNEL_SEV(lg, channel_name, notification) << "A notification severity level message";
    BOOST_LOG_CHANNEL_SEV(lg, channel_name, warning) << "A warning severity level message";
    BOOST_LOG_CHANNEL_SEV(lg, channel_name, error) << "An error severity level message";
    BOOST_LOG_CHANNEL_SEV(lg, channel_name, critical) << "A critical severity level message";
}

See the complete code.

The filter for the console sink is composed from the channel_severity_filter_actor filter and a general severity level check. This general check will be used when log records do not have a channel attribute or the channel name is not one of those specified in channel_severity_filter_actor initialization. It should be noted that it is possible to set the default result of the threshold filter that will be used in this case; the default result can be set by the set_default method. The channel_severity_filter_actor filter is set up to limit record severity levels for channels "general", "network" and "gui" - all records in these channels with levels below the specified thresholds will not pass the filter and will be ignored.

The threshold filter is implemented as an equivalent to std::map over the channels, which means that the channel value type must support partial ordering. Obviously, the severity level type must also support ordering to be able to be compared against thresholds. By default the predicate will use std::less equivalent for channel name ordering and std::greater_equal equivalent to compare severity levels. It is possible to customize the ordering predicates. Consult the reference of the channel_severity_filter_actor class and channel_severity_filter generator to see the relevant template parameters.

#include <boost/log/expressions/predicates/is_debugger_present.hpp>

This filter is implemented for Windows only. The is_debugger_present filter returns true if the application is run under a debugger and false otherwise. It does not use any attribute values from the log record. This predicate is typically used with the debugger output sink.

// Complete sink type
typedef sinks::synchronous_sink< sinks::debug_output_backend > sink_t;

void init_logging()
{
    boost::shared_ptr< logging::core > core = logging::core::get();

    // Create the sink. The backend requires synchronization in the frontend.
    boost::shared_ptr< sink_t > sink(new sink_t());

    // Set the special filter to the frontend
    // in order to skip the sink when no debugger is available
    sink->set_filter(expr::is_debugger_present());

    core->add_sink(sink);
}

See the complete code.

As was noted in the tutorial, the library provides several ways of expressing formatters, most notable being with a stream-style syntax and Boost.Format-style expression. Which of the two formats is chosen is determined by the appropriate anchor expression. To use stream-style syntax one should begin the formatter definition with the stream keyword, like that:

#include <boost/log/expressions/formatters/stream.hpp>

sink->set_formatter(expr::stream << expr1 << expr2 << ... << exprN);

Here expressions expr1 through exprN may be either manipulators, described in this section, or other expressions resulting in an object that supports putting into an STL-stream.

To use Boost.Format-style syntax one should use format construct:

#include <boost/log/expressions/formatters/format.hpp>

sink->set_formatter(expr::format("format string") % expr1 % expr2 % ... % exprN);

The format string passed to the format keyword should contain positional placeholders for the appropriate expressions. In the case of wide-character logging the format string should be wide. Expressions expr1 through exprN have the same meaning as in stream-like variant. It should be noted though that using stream-like syntax usually results in a faster formatter than the one constructed with the format keyword.

Another useful way of expressing formatters is by using string templates. This part of the library is described in this section and is mostly intended to support initialization from the application settings.

#include <boost/log/expressions/formatters/date_time.hpp>

// Supporting headers
#include <boost/log/support/date_time.hpp>

The library provides the format_date_time formatter dedicated to date and time-related attribute value types. The function accepts the attribute value name and the format string compatible with Boost.DateTime.

sink->set_formatter
(
    expr::stream << expr::format_date_time< boost::posix_time::ptime >("TimeStamp", "%Y-%m-%d %H:%M:%S")
);

The attribute value can alternatively be identified with the attr placeholder or the attribute keyword.

The following placeholders are supported in the format string:

Table 1.2. Date format placeholders

Placeholder

Meaning

Example

%a

Abbreviated weekday name

"Mon" => Monday

%A

Long weekday name

"Monday"

%b

Abbreviated month name

"Feb" => February

%B

Long month name

"February"

%d

Numeric day of month with leading zero

"01"

%e

Numeric day of month with leading space

" 1"

%m

Numeric month, 01-12

"01"

%w

Numeric day of week, 1-7

"1"

%y

Short year

"12" => 2012

%Y

Long year

"2012"


Table 1.3. Time format placeholders

Placeholder

Meaning

Example

%f

Fractional seconds with leading zeros

"000231"

%H, %O

Hours in 24 hour clock or hours in time duration types with leading zero if less than 10

"07"

%I

Hours in 12 hour clock with leading zero if less than 10

"07"

%k

Hours in 24 hour clock or hours in time duration types with leading space if less than 10

" 7"

%l

Hours in 12 hour clock with leading space if less than 10

" 7"

%M

Minutes

"32"

%p

AM/PM mark, uppercase

"AM"

%P

AM/PM mark, lowercase

"am"

%q

ISO time zone

"-0700" => Mountain Standard Time

%Q

Extended ISO time zone

"-05:00" => Eastern Standard Time

%S

Seconds

"26"


Table 1.4. Miscellaneous placeholders

Placeholder

Meaning

Example

%-

Negative sign in case of time duration, if the duration is less than zero

"-"

%+

Sign of time duration, even if positive

"+"

%%

An escaped percent sign

"%"

%T

Extended ISO time, equivalent to "%H:%M:%S"

"07:32:26"


Note that in order to use this formatter you will also have to include a supporting header. When boost/log/support/date_time.hpp is included, the formatter supports the following types of Boost.DateTime:

  • Date and time types: boost::posix_time::ptime and boost::local_time::local_date_time.
  • Gregorian date type: boost::gregorian::date.
  • Time duration types: boost::posix_time::time_duration as well as all the specialized time units such as boost::posix_time::seconds, including subsecond units.
  • Date duration types: boost::gregorian::date_duration.
[Tip] Tip

Boost.DateTime already provides formatting functionality implemented as a number of locale facets. This functionality can be used instead of this formatter, although the formatter is expected to provide better performance.

#include <boost/log/expressions/formatters/named_scope.hpp>

The formatter format_named_scope is intended to add support for flexible formatting of the named scope attribute values. The basic usage is quite straightforward and its result is similar to what attr provides:

// Puts the scope stack from outer ones towards inner ones: outer scope -> inner scope
sink->set_formatter(expr::stream << expr::format_named_scope("Scopes", "%n"));

The first argument names the attribute and the second is the format string. The string can contain the following placeholders:

Table 1.5. Named scope format placeholders

Placeholder

Meaning

Example

%n

Scope name

"void bar::foo()"

%c

Function name, if the scope is denoted with BOOST_LOG_FUNCTION, otherwise the full scope name. See the note below.

"bar::foo"

%C

Function name, without the function scope, if the scope is denoted with BOOST_LOG_FUNCTION, otherwise the full scope name. See the note below.

"foo"

%f

Source file name of the scope

"/home/user/project/foo.cpp"

%F

Source file name of the scope, without the path

"foo.cpp"

%l

Line number in the source file

"45"


[Note] Note

As described in the named scope attribute description, it is possible to use BOOST_LOG_FUNCTION macro to automatically generate scope names from the enclosing function name. Unfortunately, the actual format of the generated strings is compiler-dependent and in many cases it includes the complete signature of the function. When "%c" or "%C" format flag is specified, the library attempts to parse the generated string to extract the function name. Since C++ syntax is very context dependent and complex, it is not possible to parse function signature correctly in all cases, so the library is basically guessing. Depending on the string format, this may fail or produce incorrect results. In particular, type conversion operators can pose problems for the parser. In case if the parser fails to recognize the function signature the library falls back to using the whole string (i.e. behave equivalent to the "%n" flag). To alleviate the problem the user can replace the problematic BOOST_LOG_FUNCTION usage with the BOOST_LOG_NAMED_SCOPE macro and explicitly write the desired scope name. Scope names denoted with BOOST_LOG_NAMED_SCOPE will not be interpreted by the library and will be output as is. In general, for portability and runtime performance reasons it is preferable to always use BOOST_LOG_NAMED_SCOPE and "%n" format flag.

While the format string describes the presentation of each named scope in the list, the following named arguments allow to customize the list traversal and formatting:

  • format. The named scope format string, as described above. This parameter is used to specify the format when other named parameters are used.
  • iteration. The argument describes the direction of iteration through scopes. Can have values forward (default) or reverse.
  • delimiter. The argument can be used to specify the delimiters between scopes. The default delimiter depends on the iteration argument. If iteration == forward the default delimiter will be "->", otherwise it will be "<-".
  • depth. The argument can be used to limit the number of scopes to put to log. The formatter will print depth innermost scopes and, if there are more scopes left, append an ellipsis to the written sequence. By default the formatter will write all scope names.
  • incomplete_marker. The argument can be used to specify the string that is used to indicate that the list has been limited by the depth argument. By default the "..." string is used as the marker.
  • empty_marker. The argument can be used to specify the string to output in case if the scope list is empty. By default nothing is output in this case.

Here are a few usage examples:

// Puts the scope stack in reverse order:
// inner scope (file:line) <- outer scope (file:line)
sink->set_formatter
(
    expr::stream
        << expr::format_named_scope(
            "Scopes",
            keywords::format = "%n (%f:%l)",
            keywords::iteration = expr::reverse)
);

// Puts the scope stack in reverse order with a custom delimiter:
// inner scope | outer scope
sink->set_formatter
(
    expr::stream
        << expr::format_named_scope(
            "Scopes",
            keywords::format = "%n",
            keywords::iteration = expr::reverse,
            keywords::delimiter = " | ")
);

// Puts the scope stack in forward order, no more than 2 inner scopes:
// ... outer scope -> inner scope
sink->set_formatter
(
    expr::stream
        << expr::format_named_scope(
            "Scopes",
            keywords::format = "%n",
            keywords::iteration = expr::forward,
            keywords::depth = 2)
);

// Puts the scope stack in reverse order, no more than 2 inner scopes:
// inner scope <- outer scope <<and more>>...
sink->set_formatter
(
    expr::stream
        << expr::format_named_scope(
            "Scopes",
            keywords::format = "%n",
            keywords::iteration = expr::reverse,
            keywords::incomplete_marker = " <<and more>>..."
            keywords::depth = 2)
);
[Tip] Tip

An empty string can be specified as the incomplete_marker parameter, in which case there will be no indication that the list was truncated.

#include <boost/log/expressions/formatters/if.hpp>

There are cases when one would want to check some condition about the log record and format it depending on that condition. One example of such a need is formatting an attribute value depending on its runtime type. The general syntax of the conditional formatter is as follows:

expr::if_ (filter)
[
    true_formatter
]
.else_
[
    false_formatter
]

Those familiar with Boost.Phoenix lambda expressions will find this syntax quite familiar. The filter argument is a filter that is applied to the record being formatted. If it returns true, the true_formatter is executed, otherwise false_formatter is executed. The else_ section with false_formatter is optional. If it is omitted and filter yields false, no formatter is executed. Here is an example:

sink->set_formatter
(
    expr::stream
        // First, put the current time
        << expr::format_date_time("TimeStamp", "%Y-%m-%d %H:%M:%S.%f") << " "
        << expr::if_ (expr::has_attr< int >("ID"))
           [
               // if "ID" is present then put it to the record
               expr::stream << expr::attr< int >("ID")
           ]
           .else_
           [
               // otherwise put a missing marker
               expr::stream << "--"
           ]
        // and after that goes the log record text
        << " " << expr::message
);

There are times when one would like to additionally post-process the composed string before passing it to the sink backend. For example, in order to store log into an XML file the formatted log record should be checked for special characters that have a special meaning in XML documents. This is where decorators step in.

[Note] Note

Unlike most other formatters, decorators are dependent on the character type of the formatted output and this type cannot be deduced from the decorated formatter. By default, the character type is assumed to be char. If the formatter is used to compose a wide-character string, prepend the decorator name with the w letter (e.g. use wxml_decor instead of xml_decor). Also, for each decorator there is a generator function that accepts the character type as a template parameter; the function is named similarly to the decorator prepended with the make_ prefix (e.g. make_xml_decor).

#include <boost/log/expressions/formatters/xml_decorator.hpp>

This decorator replaces XML special characters (&, <, >, " and ') with the corresponding tokens (&amp;, &lt;, &gt;, &quot; and &apos;, correspondingly). The usage is as follows:

xml_sink->set_formatter
(
    // Apply the decoration to the whole formatted record
    expr::stream << expr::xml_decor
    [
        expr::stream << expr::message
    ]
);

Since character decorators are yet another kind of formatters, it's fine to use them in other contexts where formatters are appropriate. For example, this is also a valid example:

xml_sink->set_formatter
(
    expr::format("<message>%1%: %2%</message>")
        % expr::attr< unsigned int >("LineID")
        % expr::xml_decor[ expr::stream << expr::message ]; // Only decorate the message text
);

There is an example of the library set up for logging into an XML file, see here.

#include <boost/log/expressions/formatters/csv_decorator.hpp>

This decorator allows to ensure that the resulting string conforms to the CSV format requirements. In particular, it duplicates the quote characters in the formatted string.

csv_sink->set_formatter
(
    expr::stream
        << expr::attr< unsigned int >("LineID") << ","
        << expr::csv_decor[ expr::stream << expr::attr< std::string >("Tag") ] << ","
        << expr::csv_decor[ expr::stream << expr::message ]
);
#include <boost/log/expressions/formatters/c_decorator.hpp>

The header defines two character decorators: c_decor and c_ascii_decor. The first one replaces the following characters with their escaped counterparts: \ (backslash, 0x5c), \a (bell character, 0x07), \b (backspace, 0x08), \f (formfeed, 0x0c), \n (newline, 0x0a), \r (carriage return, 0x0d), \t (horizontal tabulation, 0x09), \v (vertical tabulation, 0x0b), ' (apostroph, 0x27), " (quote, 0x22), ? (question mark, 0x3f). The c_ascii_decor decorator does the same but also replaces all other non-printable and non-ASCII characters with escaped hexadecimal character codes in C notation (e.g. "\x8c"). The usage is similar to other character decorators:

sink->set_formatter
(
    expr::stream
        << expr::attr< unsigned int >("LineID") << ": ["
        << expr::c_decor[ expr::stream << expr::attr< std::string >("Tag") ] << "] "
        << expr::c_ascii_decor[ expr::stream << expr::message ]
);
#include <boost/log/expressions/formatters/char_decorator.hpp>

This decorator allows the user to define his own character replacement mapping in one of the two forms. The first form is a range of std::pairs of strings (which can be C-style strings or ranges of characters, including std::strings). The strings in the first elements of pairs will be replaced with the second elements of the corresponding pair.

std::array< std::pair< const char*, const char* >, 3 > shell_escapes =
{
    { "\"", "\\\"" },
    { "'",  "\\'" },
    { "$",  "\\$" }
};

sink->set_formatter
(
    expr::stream << expr::char_decor(shell_escapes)
    [
        expr::stream << expr::message
    ]
);

The second form is two same-sized sequences of strings; the first containing the search patterns and the second - the corresponding replacements.

std::array< const char*, 3 > shell_patterns =
{
    "\"", "'", "$"
};
std::array< const char*, 3 > shell_replacements =
{
    "\\\"", "\\'", "\\$"
};

sink->set_formatter
(
    expr::stream << expr::char_decor(shell_patterns, shell_replacements)
    [
        expr::stream << expr::message
    ]
);

In both cases the patterns are not interpreted and are sought in the formatted characters in the original form.

#include <boost/log/expressions/formatters/max_size_decorator.hpp>

Sometimes it can be useful to be able to limit the size of the output of a formatter or its part. For example, the limit might be imposed by the sink or the required output format. The max_size_decor decorator allows to enforce such limit. Let's see a simple example:

sink->set_formatter
(
    expr::stream << expr::max_size_decor< char >(20)
    [
        expr::stream << expr::message
    ]
);
[Note] Note

The explicit template parameter for max_size_decor specifies the character type that is used by formatter. In this example the string produced by the formatter contains characters of type char, hence the template parameter.

In this example the decorator limits the log message to no more than 20 code units of type char and removes the rest from the output. So if we had a log record like this:

BOOST_LOG(lg) << "The quick brown fox jumps over the lazy dog";

the resulting output would look like this:

The quick brown fox

However, looking at this output in a log file it is unclear whether the original output contained anything else. One might want to indicate the fact of message truncation, should one occur. For that purpose the decorator allows to specify an overflow marker that will be placed at the end of the truncated output, if the truncation took place. We can modify the above example like this:

sink->set_formatter
(
    expr::stream << expr::max_size_decor(20, ">>>")
    [
        expr::stream << expr::message
    ]
);
[Tip] Tip

The formatter character type is deduced from the character type of the overflow marker, so it can be omitted.

Now our log record will look like this in the output:

The quick brown f>>>

This output makes it more obvious that there was more to the original message. Note also that the length of the output is still 20 characters; the marker replaced the last characters of the truncated output.

[Tip] Tip

For the character truncation and marker positioning to work correctly in multibyte encodings, it is important that the locale used by the formatter is set up properly. In particular, the std::codecvt facet in the locale must correctly recognize multibyte sequences corresponding to a single character in the output. One can use Boost.Locale to generate the locale and then install it in the sink frontend by calling imbue (see basic_formatting_sink_frontend for reference). If the output character type is wchar_t, char16_t or char32_t the library assumes that the output is encoded in UTF-16 or UTF-32, depending on the size of the character type. Because the truncation might occur in the middle of a multi-unit character, truncated output produced by the decorator can be slightly shorter than the specified limit sometimes.

As with any other formatter, max_size_decor can participate in more complex formatting expressions and limit length of only part of the message.

sink->set_formatter
(
    expr::stream
        << expr::format_date_time("TimeStamp", "%Y-%m-%d %H:%M:%S.%f") << " ["
        << expr::max_size_decor(20, ">>>")
           [
               expr::stream << expr::message
           ]
        << "]"
);

The above formatter can produce output like this:

2016-08-10 00:36:44.028473 [The quick brown f>>>]

PrevUpHomeNext