Added support for generating another log file name before collecting the
file in the text file
sink backend. This allows to combine appending
to an existing log file with timestamps and file counters in log filenames,
and, consequently, file
collection in general. To enable this feature, one must set the
target file name pattern in the text file sink backend (using the
target_file_name named parameter,
text_file_backend::set_target_file_name_pattern method call
or "TargetFileName" sink parameter in the settings).
This pattern will be used to generate a new file name when the file is
finished writing and is about to be collected. Therefore, the original
(active) file name can be set to a stable pattern (e.g. "app.log")
so that appending to a previously written file works. Then the target file
name can include a timestamp or a counter (e.g. "app-2019-01-05.log"),
so that different rotated files don't conflict in the target storage.
Updated syslog sink backend to avoid using deprecated Boost.ASIO
interfaces. ( GH#59)
Fixed a problem that could cause incorrect estimate of the total size of
rotated files in the target storage if the text
file sink backend was writing directly into the target storage directory
and the log file name matched one of the old files in the storage, and
that file was picked as the old log file by
Note that this configuration is still not fully supported and may result
in premature file deletion if multiple sinks write files directly into
the common target storage directory. It is recommended to configure sinks
to write log files into directories different from the target storage directory.
Improved support for VxWorks. ( PR#39)
Updated library to use
where possible to work with allocators. This should improve compatibility
with C++ post C++17.
Added documentation for the "Append" config
file parameter for "TextFile" sinks. The parameter was
supported previously, only the documentation was missing.
Fixed a bug in
that caused zero file counter to be returned if the target directory contained
a file with the maximum counter value in the name. This used to cause incorrectly
named log files in the target directory after the user's application restart.
Updated library build scripts to unify system macros configuration for
different platforms. In particular, this should improve compatibility with
Removed the previously deprecated
As previously suggested, Boost.TypeIndex
is recommended as a replacement.
Added a way to access the current file name from the text
file sink backend. The file name can be obtained with the
Added a way to disable log file rotation on text
file sink backend destruction, which typically happens on program
termination. This can be done via
backend constructor parameter or similarly named method, or with the
EnableFinalRotation parameter in the
Fixed compilation errors for Android API prior to version 21.
Streaming operators now take scalar types and enums by value. This allows
to output static constants and bitfields directly into formatting stream
and record stream. ( #11998)
Fixed auto-detection of native syslog API. ( #12600)
In UDP socket based syslog backend implementation, changed the syslog message
format for better compliance with RFC3164.
File close handler installed in text
file sink backend is no longer called if the file is not open yet.
Added new tools for inter-process logging on a local machine. The implementation
includes a resource
name wrapper, an inter-process
message queue and a sink
backend. The new functionality is optional and can be disabled by
macro at library build time. Thanks to Lingxi Li for the initial patch.
Added a new character decorator called
max_size_decor. The new decorator
allows to limit the output of its adopted formatter up to the specified
length. This can be useful with the new inter-process sink backend.
Fixed that logging streams could retain formatting settings across different
log records. ( #12178)
The support for
boost::basic_string_ref and its specializations
is deprecated; users are encouraged to switch to
which is now supported for output to the formatting streams. The support
boost::basic_string_ref will be removed in future
Added support for limiting the number of stored log files in the target
directory of the file collector. The limit can be specified in the
max_files named parameter to the
calls or as the "MaxFiles" parameter for the sink in the settings
file. Thanks to Erich Keane for the patch. ( #8746)
Fixed various compilation problems for Windows CE.
Fixed compilation problems on Solaris.
Added a workaround for MSVC-10 and 11 generating broken code for formatters
in some cases. ( #12025)
On Windows, the configuration macro
is no longer used by the library. The target Windows version should be
configured by defining macro
to the desired WinAPI version (e.g. 0x0501 for Windows XP). This macro
is used in multiple different Boost libraries besides Boost.Log.
The default target Windows version is now Vista on compilers with recent
enough Windows SDK and XP on others. The default is no longer chosen by
Boost.Log but by the common WinAPI submodule used by different Boost libraries.
Changed internal mutex type in the thread-safe queue implementation that
is used in asynchronous sink frontends with the
policy. The updated queue has improved performance in case of heavy thread
contention (hundreds and thousands of logging threads) on POSIX-compatible
Fixed compilation for Android using Google NDK. ( #11559)
Fixed compilation of some logging statements, where the first object to
be put into stream is not directly supported by
Added a workaround for Solaris Studio 12.4, which should fix the compilation
Fixed compilation when native
type is disabled. Added a note of discouragement to the configuration
section. ( #11541)
Fixed exporting symbols from the
library on POSIX-like systems.
Fixed build failure on Nuxi CloudABI.
Fixed compilation of character
Added a workaround for incorrect file name generation in text
file sink backend, when the file name contains date/time placeholders.
On systems with symbol
visibility support (e.g. Linux) the library is now built with all
internal symbols hidden. API symbols still have default visibility, so
this shouldn't affect linking with the library.
Breaking change: The library has been
ported to Boost.TypeIndex
for its underlying type info management tool. This improved library compatibility
with hidden symbol visibility mode on some compilers. This affected the
following public interfaces:
thrown by the library now have
attached as the description of the offending type. The type was previously
information now contains
This is the error info that can be used to obtain the type info from
object is empty, the returned
is default-constructed (i.e. refers to the
type). User-defined attribute value implementations should be similarly
attribute_value::impl::get_type() virtual method now also returns
has been deprecated and will be removed in future releases. Boost.TypeIndex
is recommended as a replacement.
Removed the previously deprecated headers:
Added support for building the library for OpenBSD. ( #11446)
Improved internal implementation of the event synchronization primitive
used for asynchronous logging. The updated implementation relies on Boost.Atomic
for atomic operations which provides better portability. On Linux the implementation
uses futexes directly. ( #11398)
Changed the format of dates produced by the default formatter constructed
from strings (e.g. when initializing the library from a config file). The
new format displays months as numbers instead of abbreviated names. This
allows for easier log record ordering when post-processing log files. (
Fixed incorrect behavior of
constructor in some cases. The inserted elements could have made some previously
inserted elements not findable. The constructor from
could leave some of the attribute values acquired from attributes not findable.
Added missing function template exports. ( #11495)
Fixed thread id formatting. The thread identifiers could be presented as
zeros on big-endian platforms. Also the lower 4 bits of the ids were lost
in the output.
Fixed process id formatting. Process ids could have misplaced filler zeros.
Fixed build failure on GNU Hurd.
Fixed incorrect behavior of text
file sink backend in case if free space on the file system gets
exhausted. The sink will no longer create lots of empty files in attempt
to recover. ( #11016)
Fixed incorrect behavior of
attribute_set::insert() in some cases. The inserted elements
could have made some previously inserted elements not findable. ( #11106)
Fixed incorrect behavior of
attribute_value_set::size() if a large number of attribute values
are inserted into the set. ( #11148)
For Windows targets, the library now compiles for Windows XP by default.
Added indexing operators with
record_view. The operators
behave the same way as the similar operators of
(i.e. return an
identified by the name).
Added operators for non-const object output to
Added new format flags "%c", "%C" and "%F"
to the named
scope formatter. The new flags allow putting function names and
source file names of named scopes into the formatted strings. ( #9263)
Added support for incomplete and empty markers to the named
scope formatter. The markers can be used to customize the scope
list presentation when the list is empty or limited by the
depth named parameter. ( #9123)
The default presentation for incomplete named scope lists has changed.
In previous releases the incomplete marker included a trailing delimiter,
for example "scope1<-scope2<-...". From this release the
trailing delimiter is omitted, so in the same case the formatting result
would be: "scope1<-scope2..." (note the missing trailing "<-").
Added a support header for
boost/log/support/std_regex.hpp is included, one can use
std::regex expressions with string
By default Boost.Log uses Boost.Regex
internally as the regular expressions backend. Boost.Xpressive
was used in previous releases. This backend is used to implement string
matching filters parsed from strings or settings. Using Boost.Regex
by default results in smaller executables and also better runtime performance.
Added build configuration macros for regex backend selection. By defining
at Boost.Log build time the user can select which regex implementation
will be used by the library internally for the string matching filters
parsed from strings and settings. Note that this selection does not affect
matching filters in expressions.
dump manipulator output on AVX2-enabled
CPUs (e.g. Intel Haswell).
Fixed compilation of
method of loggers.
Fixed a possible race in
locked_backend() function implementation of synchronous
and asynchronous sink frontends.
Fixed a possible infinite block of the logging threads in the asynchronous
sink enqueue methods when
strategy was used.
Added a workaround for ticket #9363.
Added a workaround for MSVC bug that caused the
add_value manipulator produce
garbage attribute values when using with immediate integer constants. (
Added a new configuration macro
By defining this macro the user can disable compilation of the default
filter and formatter factories used by settings parsers. This can substantially
reduce binary sizes while still retaining support for settings parsers.
Note that when this macro is defined the user will have to register all attributes in the library.
Rewritten some of the parsers to reduce the compiled binary size. The rewritten
parsers are more robust in detecting ambiguous and incorrect input.
boost/log/utility/intrusive_ref_counter.hpp is deprecated and will be removed
in future releases. Its contents have been reworked and moved to Boost.SmartPtr,
boost/log/utility/explicit_operator_bool.hpp is deprecated and will be removed
in future releases. Its contents have been moved to Boost.Utility,
boost/log/utility/empty_deleter.hpp is deprecated and will be removed
in future releases. Its contents have been moved to Boost.Utility,
attribute generating incorrect time readings on Windows on heavy thread
API was used.
Fixed a bug in the filter parser that prevented using parsed filters with
some attributes. For example, parsed filters didn't work with a string-typed
attribute value, if the value was compared to a numeric operand.
Fixed thread id formatting discrepancies between the default sink and formatters.
Fixed parsing RotationTimePoint parameter values from settings, when the
time point only included time of day (i.e. daily rotation).
Closed tickets: #8815, #8819, #8915, #8917, #9139, #9140,
no longer derives from
but rather reimplements its and its base classes interface closely. This
solves problems with overloading
and user-defined types. This will break user's code if it relied on the
inheritance from the standard stream types (such as passing
object as an argument to a function receiving
Please, use the
stream() member function to access the standard
stream. This change will not break the
code that outputs user-defined types to a
stream while there are only
operator<< overloads for the standard stream
types - the code will compile and use the standard operator overloads,
Removed the use of deprecated macros of Boost.Config.
Build system improved. On Windows, presence of Message Compiler is now
detected automatically, and support for event log is only enabled when
the tool is available.
Fixed compilation when
configuration macro is defined.
Fixed compilation of some uses of the
add_value manipulator with MSVC.
Added a new
dump output manipulator for printing
The library is now compatible with Boost 1.53 or newer. Boost.Filesystem
v2 no longer supported.
The library now does not introduce separate logging cores for different
character types. A lot of other library components also became character
type agnostic. The application can now use loggers of different character
types with the common logging core. The library performs character code
conversion as needed. Boost.Locale
can be used to construct locale objects for proper encoding conversion.
configuration macro has been replaced with
with the opposite meaning. The support for compiler intrinsics for TLS
is now disabled by default.
Added configuration macros
macro renamed to
The new macros allow to selectively disable support for the corresponding
The library now uses Boost.Xpressive
instead of Boost.Regex
internally which makes it unnecessary to build the latter in order to use
the library. Boost.Regex
is still supported on the user's side.
Made some internal code to detect Windows NT6 API availability at run time,
if not explicitly enabled by the
macro. The code compiled without the macro defined will still be able run
on NT5, but when run on NT6 it will be more efficient. With the macro defined
the resulting code will not run on NT5, but will be a little more efficient
on NT6 than without the macro.
Added a concept of a default sink. The default sink is used when there
are no sinks configured in the logging core. The sink is synchronous and
thread-safe, it requires no configuration and is overridden by any sinks
configured in the core by user. The default sink will write log messages
to the console, prepending with a timestamp, thread id and severity level.
Trivial logging no longer implicitly initializes the library. Instead,
the default sink is used to display log messages, unless the library is
configured otherwise. It is now possible to use both trivial and advanced
Attribute values can now be added to log records after filtering. Such
values do not participate in filtering but can be used by formatters and
sinks. Log record message is now one of such attribute values, it is no
longer directly accessible from the log record interface.
Formatters and sinks no longer operate on log records but rather on
record_views. Records are now
moved from when pushed to the core for further processing. This is done
in order to eliminate the possibility of unsafe record modification after
pushing to the core. As a consequence, log records can no longer be copied,
only moving is allowed. Record views can be copied and moved; copying is
a shallow operation.
The implementation now provides several stream manipulators. Notably, the
to_log manipulator allows to customize
formatting for particular types and attributes without changing the regular
streaming operator. Also, the
add_value manipulator can be used
in logging expressions to attach attribute values to the record.
Made a lot of improvements to speedup code compilation.
Changed the interface and the way of handling attribute values. The value
is now a pimpl wrapper around the value holder. The
class in various components of the library is no longer pointed to with
shared_ptrs but instead
is handled by value. This allowed to simplify attribute value handling
in simple cases.
Similarly to attribute values, the interface of attributes has been reworked
in the pimpl fashion. All attributes now derive from the
base class, which holds the reference to the implementation. All attributes
now have to be created by value rather than wrapped into
shared_ptr by user, which makes the code
Added support for casting attributes from the base class
to the actual attribute type. This can be useful when the concrete attribute
factory provides additional interfaces.
The attribute value no longer has the
method. Use the
function as a replacement.
The key type of attribute sets and attribute values set has been changed.
The new key type is called
It is constructible from strings, so in most cases users won't need to
change the code. See here
for more information.
Attribute values view have been renamed to attribute value set. The container
now supports adding more attribute values after being constructed.
Attribute sets and attribute value sets no longer maintain order of elements.
Although it wasn't stated explicitly, the containers used to be ordered
associative containers. Now the order of elements is unspecified. The implementation
has been reworked to speed up insertion/removal of attributes, as well
as attribute lookup and values set construction. The drawback is that memory
footprint may get increased in some cases.
Attribute sets now use small memory pools to speed up element insertion/removal.
utility to the
attributes directory. The
utility has been replaced
The two new headers define the revised API of attribute value extraction
and visitation, respectively. See here
for more details.
attribute macros simplified. The attribute constructor arguments
are specified next to the attribute type and tag type is no longer required.
attribute no longer uses
type for thread identification. An internal type is used instead, the type
is accessible as
The new thread ids are taken from the underlying OS API and thus more closely
correlate to what may be displayed by debuggers and system diagnostic tools.
The attribute generates a string with the executable name of the current
functor attribute has
been renamed to
The generator function has been renamed from
make_function. The header
has been renamed from
Fixed compilation problems with exception handling logger feature.
Global logger storage made more friendly to the setups in which hidden
visibility is set by default.
Added the macros for separated global logger declaration and definition.
Old macros have been renamed to better reflect their effect (
Also, the macros no longer define the
free function for logger acquisition. Use
instead. See here
for more information.
The channel logger now supports changing the channel name after construction.
The channel name can be set either by calling the modifier method or by
specifying the name in the logging statement. Added
(as well as their shorthands
macros that allow to specify channel name for the log record.
Types for integral constants for syslog and event log were renamed to drop
Formatting functionality moved to sink frontends. Sink backends that support
record formatting derive from the
class template, which indicates to the frontend that record formatting
is required. This breaks user-side API of the library: the formatter and
locale has to be set to the frontend rather than backend.
Formatting support no longer makes frontend thread synchronization mandatory.
Formatting is done prior to locking for processing the record in the backend
and can be performed concurrently in multiple threads.
Added support for flushing sinks. A sink backend that supports flushing
has to define public method with the following signature:
Asynchronous sink frontend reworked, ordering asynchronous sink removed.
class template now allows to specify record queueing strategy. Several
strategies provided, including
(the default) and
which cover the functionality of asynchronous sink frontends in 1.x releases.
See the asynchronous
sink frontend docs for more details.
Lock-free FIFO record queueing in asynchronous sinks reworked to reduce
log record processing stalls.
file parameter for text file sinks. If this parameter is set to
true, the sink will append log records to
the existing log file instead of overwriting it.
Added bounded variants of asynchronous sink frontends. Implemented two
strategies to handle queue overflows: either log records are dropped or
logging threads are blocked until there is space in the queue.
Filters and formatters:
As a result of character type unification, filters no longer depend on
the character type.
Two new types were introduced to dynamically store filters and formatters:
Both new types implement type erasure and provide function calling operators
to invoke the stored filter or formatter.
Filters and formatters were rewritten. The new implementation is based
and resides in the
namespace. Attribute placeholders are now interoperable with other template
expressions based on Boost.Phoenix.
All template expression headers now reside in the
The library now supports defining keywords for attributes (see
BOOST_LOG_ATTRIBUTE_KEYWORD macro). Keywords
can be used in template expressions instead of attribute placeholders and
also as a key in container lookups.
Filters and formatters do not throw exceptions by default when an attribute
value cannot be used to complete the function (e.g. when the value is missing
or has inappropriate type). The offending filter subexpression will return
false in such cases, the formatter
will result in empty string instead of the value. The behavior can be changed
or_throw member functions
on the attribute value placeholder in the filtering/formatting expression.
Date and time formatter implementation is not based on Boost.DateTime
IO facets anymore. The new implementation improves formatting performance.
The formatter has been renamed to
Named scope formatter now supports scope format specification. The scope
format can include the scope name, as well as file name and line number.
The formatter has been renamed to
decorators were renamed to
The generic character decorator is named
Added a new channel
severity filter. The filter allows to setup severity thresholds
for different channels. The filter checks log record severity level against
the threshold corresponding to the channel the record belongs to.
Most code examples from the docs have been extracted into compilable standalone
examples, which can be used for testing and experimenting with the library.
Added a lot of cross-references to the documentation, which should simplify
Fixed a bug: the logging core could enter an infinite loop inside
push_record if a sink throws and the
exception is suppressed by the exception handler set in the core.
Changed the type dispatching implementation to reduce the usage of virtual
functions. This greatly reduced the library size.
Type dispatchers made more friendly to the setups in which hidden visibility
is set by default.
The interface of type dispatchers changed. The dispatcher now returns
type_visitor instance by
value, and the visitor is no longer a base for the actual receiver of the
dispatched value. Instead, the visitor now refers to the receiver, if one
is capable to consume the value. The
method has been renamed to
(). The static type dispatcher now
requires a reference to the receiver on construction, it doesn't imply
that the receiver derives from the dispatcher anymore.
has been removed. There is no replacement.
The library now uses many features from the latest C++ standard (aka C++11).
For instance, many library components now support move semantics. Boost.Move
is used for move emulation on C++03-compatible compilers.
This release mostly fixes bugs in the code and documentation.
Added support for Boost.Filesystem
A number of bugs fixed.
Corrections in the documentation.
This release mostly fixes bugs in the code and documentation. The next major
release (2.0) will contain breaking changes and feature additions. The 1.0
branch will not receive any feature updates.
Added some optimization for thread local storage. In Windows setups, if
you dynamically load Boost.Log binaries during the application run time,
this optimization may lead to crashes. In that case, you may disable it
during the library build process. The macro also affects other platforms,
which may be useful if your compiler does not support TLS.
Added a few public accessors and convenience constructors to severity and
Added ability to rotate log files at the specified time points. The
rotation_interval keyword is no longer
available. The same functionality is achieved with the new
time_based_rotation keyword and the
predicate. See here
for more details.
Improved support for MinGW and Cygwin.
A number of bugs fixed. Added workarounds to compile on GCC 4.2.
Lots of corrections in the documentation.
Substantial documentation improvement. The tutorial section has been reorganized.
Library headers have been reorganized. Some other Boost libraries that
were previously included by headers have been made optional. Such dependencies
have been extracted into separate headers in the
directory. Top level library headers now mostly include nested headers.
Keywords have moved into a dedicated
namespace. There are no longer nested
attributes, etc. All keywords have been
extracted into separate headers in the
Removed rotating file stream. As a replacement, a new
file sink has been added, which allows to achieve the same results
ans adds a few more features.
Added a new multifile
Added a new ordering asynchronous sink frontend.
The syslog sink
backend is now supported on Windows, too. The sink no longer requires native
support for POSIX API for syslog, but is able to send syslog packets to
a remote server over UDP.
Loggers implementation has been improved. Feature composition mechanism
has been cleaned up.
Added support for scoped logging. There is now a distinct log
record entity, which is returned by the core as a result of filtering.
It is possible to fill in the record message in any way the user wants,
not necessarily with a streaming expression. The record object is now processed
by sinks and formatters.
Added support for exception control. User can register exception handlers
at one of the three layers: for a particular sink, at the core layer, and
for a particular logger (given that it has the appropriate feature). Sinks
and core will not suppress exceptions by default. Filter and formatters
will throw if the requested attribute value is not found.
Added a few new formatters, called character decorators. These can be useful
to post-process the formatted output before passing it on to the sink.
Added attributes for thread and process identifiers. These identifiers
are automatically added after the call to
Helper initialization functions, such as
now accept more customization options as named arguments.
A new initialization
interface has been exposed. One can fill a settings container and
use it to initialize the library.
The library setup support code has been extracted into a separate binary.
Further on, this binary will be made optional to build.
Added a new mode of logging, called trivial logging. In this mode the library
requires no initialization at all, however it does not offer many ways
A number of bugs fixed.
A few optimizations added to improve multithreaded applications performance.
Removed some bug workarounds for older Boost releases. The library now
requires Boost 1.39 or newer.
Substantial documentation improvement.
Added several Windows-specific sinks: Event Log (simplified and advanced),
Windows debugger and experimental Event Trace for Windows Vista and later.
Loggers now consist of a number of independent features that can be composed
the way the user needs. User-defined features can be developed and injected
into the mix.
Attribute value extractors improved. With the new extract function attribute
values can be extracted from the attribute values view by employing lambda
Some files and classes were moved or renamed to improve code clarity and
A number of bugs fixed.
No one really remembers these dark ages...