Introduction

Errors originating from the operating system or other low-level application program interfaces (APIs) are typically reported via an integer representing an error code, either by returning the code directly from the function (e.g. pthread_mutex_init) or by using a side channel such as the errno pseudo-variable under POSIX or GetLastError() under Windows.

However, these integer error values can only be interpreted when their source is known. The value 5 under Windows means ERROR_ACCESS_DENIED when returned by GetLastError(), but EIO when retrieved from errno. And conversely, the same error condition "access denied" is represented by the value 5 when returned by GetLastError() and 13 (EACCES) when retrieved from errno.

This means that in order for code to be able to handle errors from both sources (to retrieve a text message describing the error, or to check whether the error means "access denied"), it needs to know where the integer error value originated. For this to be possible, the integer error value needs to be accompanied by a piece of information identifying the source.

Boost.System provides a framework in which this is possible. Errors are represented by a class error_code which contains both the error value and a pointer to their source (called "category"), represented as a class derived from error_category.

The category provides member functions such as message, which returns a text message for a specific error value, and equivalent, which can be used to test whether a specific error value correspond to an error condition such as "access denied". error_code uses these category-provided functions in the implementation of its message and operator== member functions.

Boost.System contains two predefined category classes, the generic category (a reference to which is returned by generic_category()) and the system category (system_category()). The generic category represents the error values of the portable subset of errno values defined by the POSIX standard, whereas the system category is OS dependent. Under POSIX, the system category represents the errno values returned by the OS APIs (a superset of those in the generic category), whereas under Windows, the system category represents the error values returned by GetLastError().

The framework is extensible. Users can define their own categories by deriving a class from error_category and implementing a function that returns a reference to an instance of it. This capability is useful both for describing library-defined error values, and for adapting existing C API libraries that return integer error values.

For those who prefer error reporting via exceptions, Boost.System provides a standard exception class system_error that stores an error_code.

Boost.System was standardized in C++11 as <system_error>. For a while, the two were equivalent, but Boost.System has evolved since then and now contains a number of extensions over its standard sibling:

  • A non-allocating overload of message;

  • Support for nonzero error codes meaning success, via the failed member functions;

  • Support for 64 bit category identifiers, as a solution to the problem that sometimes it’s not possible to ensure that only one instance of a category exists in the program;

  • Support for attaching source locations (file/line/function) to error codes;

  • A class result<T> that can be used to return either a value or an error code from a function;

  • Various other minor improvements.

boost::system::error_code can be converted to, and constructed from, std::error_code.

Usage

All of the following code snippets assume that these lines

#include <boost/system.hpp>
namespace sys = boost::system;

are in effect.

Returning Errors from OS APIs under POSIX

Let’s suppose that we’re implementing a portable file wrapper over the OS file APIs. Its general outline is shown below:

class file
{
private:

    int fd_;

public:

    // ...

    std::size_t read( void * buffer, std::size_t size, sys::error_code& ec );
    std::size_t write( void const * buffer, std::size_t size, sys::error_code& ec );
};

Since we’re implementing the POSIX version of file, its data member is a POSIX file descriptor int fd_;, although other implementations will differ.

Our read and write functions return the number of bytes transferred, and signal errors via the output parameter ec, of type boost::system::error_code.

An implementation of file::read might look like this:

std::size_t file::read( void * buffer, std::size_t size, sys::error_code& ec )
{
    ssize_t r = ::read( fd_, buffer, size );

    if( r < 0 )
    {
        ec.assign( errno, sys::system_category() );
        return 0;
    }

    ec = {}; // ec.clear(); under C++03
    return r;
}

We first call the POSIX API read; if it returns an error, we store the errno value in ec, using the system category, and return 0 as bytes transferred. Otherwise, we clear ec to signal success, and return the result of ::read.

Note
Clearing ec on successful returns is an important step; do not omit it.

Under POSIX, the system category corresponds to POSIX errno values, which is why we use it.

In principle, since the generic category also corresponds to errno values under all platforms, we could have used it here; however, by convention under POSIX, if the errno value comes from the OS (the "system"), we use the system category for it. That’s because the system category values may be a platform-specific superset of the generic (platform-independent) values.

The implementation of file::write is basically the same. We show it here for completeness:

std::size_t file::write( void const * buffer, std::size_t size, sys::error_code& ec )
{
    ssize_t r = ::write( fd_, buffer, size );

    if( r < 0 )
    {
        ec.assign( errno, sys::system_category() );
        return 0;
    }

    ec = {}; // ec.clear(); under C++03
    return r;
}

Returning Errors from OS APIs under Windows

Under Windows, our file object will store a HANDLE instead of an int:

class file
{
private:

    HANDLE fh_;

public:

    // as before
};

and the implementation of file::read will look like this:

std::size_t file::read( void * buffer, std::size_t size, sys::error_code& ec )
{
    DWORD r = 0;

    if( ::ReadFile( fh_, buffer, size, &r, 0 ) )
    {
        // success
        ec = {}; // ec.clear(); under C++03
    }
    else
    {
        // failure
        ec.assign( ::GetLastError(), sys::system_category() );
    }

    // In both cases, r is bytes transferred
    return r;
}

Here, the system category corresponds to the values defined in the system header <winerror.h> and returned by GetLastError(). Since we use the Win32 API ReadFile to implement file::read, and it returns the error code via GetLastError(), we again store that value in ec as belonging to the system category.

The implementation of file::write is, again, the same.

std::size_t file::write( void const * buffer, std::size_t size, sys::error_code& ec )
{
    DWORD r = 0;

    if( ::WriteFile( fh_, buffer, size, &r, 0 ) )
    {
        ec = {}; // ec.clear(); under C++03
    }
    else
    {
        ec.assign( ::GetLastError(), sys::system_category() );
    }

    return r;
}

Returning Specific Errors under POSIX

Our implementation of file::read has a problem; it accepts std::size_t values for size, but the behavior of ::read is unspecified when the requested value does not fit in ssize_t. To avoid reliance on unspecified behavior, let’s add a check for this condition and return an error:

std::size_t file::read( void * buffer, std::size_t size, sys::error_code& ec )
{
    if( size > SSIZE_MAX )
    {
        ec.assign( EINVAL, sys::generic_category() );
        return 0;
    }

    ssize_t r = ::read( fd_, buffer, size );

    if( r < 0 )
    {
        ec.assign( errno, sys::system_category() );
        return 0;
    }

    ec = {}; // ec.clear(); under C++03
    return r;
}

In this case, since we’re returning the fixed errno value EINVAL, which is part of the portable subset defined by the generic category, we mark the error value in ec as belonging to the generic category.

It’s possible to use system as well, as EINVAL is also a system category value under POSIX; however, using the generic category for values belonging to the portable errno subset is slightly preferrable.

Our implementation of file::write needs to undergo a similar treatment. There, however, we’ll apply another change. When there’s no space left on the disk, ::write returns a number of bytes written that is lower than what we requested with size, but our function signals no error. We’ll make it return ENOSPC in this case.

std::size_t file::write( void const * buffer, std::size_t size, sys::error_code& ec )
{
    if( size > SSIZE_MAX )
    {
        ec.assign( EINVAL, sys::generic_category() );
        return 0;
    }

    ssize_t r = ::write( fd_, buffer, size );

    if( r < 0 )
    {
        ec.assign( errno, sys::system_category() );
        return 0;
    }

    if( r < size )
    {
        ec.assign( ENOSPC, sys::system_category() );
    }
    else
    {
        ec = {}; // ec.clear(); under C++03
    }

    return r;
}

We’ve used the system category to make it appear that the ENOSPC value has come from the ::write API, mostly to illustrate that this is also a possible approach. Using a generic value would have worked just as well.

Returning Specific Errors under Windows

Not much to say; the situation under Windows is exactly the same. The only difference is that we must use the generic category for returning errno values. The system category does not work; the integer values in the system category are entirely different from those in the generic category.

std::size_t file::read( void * buffer, std::size_t size, sys::error_code& ec )
{
    DWORD r = 0;

    if( size > MAXDWORD )
    {
        ec.assign( EINVAL, sys::generic_category() );
    }
    else if( ::ReadFile( fh_, buffer, size, &r, 0 ) )
    {
        ec = {}; // ec.clear(); under C++03
    }
    else
    {
        ec.assign( ::GetLastError(), sys::system_category() );
    }

    return r;
}

std::size_t file::write( void const * buffer, std::size_t size, sys::error_code& ec )
{
    DWORD r = 0;

    if( size > MAXDWORD )
    {
        ec.assign( EINVAL, sys::generic_category() );
    }
    else if( ::WriteFile( fh_, buffer, size, &r, 0 ) )
    {
        if( r < size )
        {
            ec.assign( ENOSPC, sys::generic_category() );
        }
        else
        {
            ec = {}; // ec.clear(); under C++03
        }
    }
    else
    {
        ec.assign( ::GetLastError(), sys::system_category() );
    }

    return r;
}

Attaching a Source Location to Error Codes

Unlike the standard <system_error>, Boost.System allows source locations (file/line/function) to be stored in error_code, so that functions handling the error can display or log the source code location where the error occurred. To take advantage of this functionality, our POSIX file::read function needs to be augmented as follows:

std::size_t file::read( void * buffer, std::size_t size, sys::error_code& ec )
{
    if( size > SSIZE_MAX )
    {
        static constexpr boost::source_location loc = BOOST_CURRENT_LOCATION;
        ec.assign( EINVAL, sys::generic_category(), &loc );
        return 0;
    }

    ssize_t r = ::read( fd_, buffer, size );

    if( r < 0 )
    {
        static constexpr boost::source_location loc = BOOST_CURRENT_LOCATION;
        ec.assign( errno, sys::system_category(), &loc );
        return 0;
    }

    ec = {}; // ec.clear(); under C++03
    return r;
}

That is, before every ec.assign statement, we need to declare a static constexpr variable holding the current source location, then pass a pointer to it to assign. Since error_code is small and there’s no space in it for more than a pointer, we can’t just store the source_location in it by value.

BOOST_CURRENT_LOCATION is a macro expanding to the current source location (a combination of __FILE__, __LINE__, and BOOST_CURRENT_FUNCTION.) It’s defined and documented in Boost.Assert.

Under C++03, instead of static constexpr, one needs to use static const. Another option is BOOST_STATIC_CONSTEXPR, a Boost.Config macro that expands to either static constexpr or static const, as appropriate.

To avoid repeating this boilerplate each time we do ec.assign, we can define a macro:

#define ASSIGN(ec, ...) { \
    BOOST_STATIC_CONSTEXPR boost::source_location loc = BOOST_CURRENT_LOCATION; \
    (ec).assign(__VA_ARGS__, &loc); }

which we can now use to augment, for example, the POSIX implementation of file::write:

std::size_t file::write( void const * buffer, std::size_t size, sys::error_code& ec )
{
    if( size > SSIZE_MAX )
    {
        ASSIGN( ec, EINVAL, sys::generic_category() );
        return 0;
    }

    ssize_t r = ::write( fd_, buffer, size );

    if( r < 0 )
    {
        ASSIGN( ec, errno, sys::system_category() );
        return 0;
    }

    if( r < size )
    {
        ASSIGN( ec, ENOSPC, sys::generic_category() );
    }
    else
    {
        ec = {}; // ec.clear(); under C++03
    }

    return r;
}

Obtaining Textual Representations of Error Codes for Logging and Display

Assuming that we have an error_code instance ec, returned to us by some function, we have a variety of means to obtain textual representations of the error code represented therein.

ec.to_string() gives us the result of streaming ec into a std::ostream, e.g. if std::cout << ec << std::endl; outputs system:6, this is what ec.to_string() will return. (system:6 under Windows is ERROR_INVALID_HANDLE from <winerror.h>.)

To obtain a human-readable error message corresponding to this code, we can use ec.message(). For ERROR_INVALID_HANDLE, it would give us "The handle is invalid" - possibly localized.

If ec contains a source location, we can obtain its textual representation via ec.location().to_string(). This will give us something like

C:\Projects\testbed2019\testbed2019.cpp:98 in function 'unsigned __int64 __cdecl file::read(void *,unsigned __int64,class boost::system::error_code &)'

if there is a location in ec, and

(unknown source location)

if there isn’t. (ec.has_location() is true when ec contains a location.)

Finally, ec.what() will give us a string that contains all of the above, something like

The handle is invalid [system:6 at C:\Projects\testbed2019\testbed2019.cpp:98 in function 'unsigned __int64 __cdecl file::read(void *,unsigned __int64,class boost::system::error_code &)']

Most logging and diagnostic output that is not intended for the end user would probably end up using what(). (ec.what(), augmented with the prefix supplied at construction, is also what boost::system::system_error::what() would return.)

Composing Functions Returning Error Codes

Let’s suppose that we need to implement a file copy function, with the following interface:

std::size_t file_copy( file& src, file& dest, sys::error_code& ec );

file_copy uses src.read to read bytes from src, then writes these bytes to dest using dest.write. This continues until one of these operations signals an error, or until end of file is reached. It returns the number of bytes written, and uses ec to signal an error.

Here is one possible implementation:

std::size_t file_copy( file& src, file& dest, sys::error_code& ec )
{
    std::size_t r = 0;

    for( ;; )
    {
        unsigned char buffer[ 1024 ];

        std::size_t n = src.read( buffer, sizeof( buffer ), ec );

        // read failed, leave the error in ec and return
        if( ec.failed() ) return r;

        // end of file has been reached, exit loop
        if( n == 0 ) return r;

        r += dest.write( buffer, n, ec );

        // write failed, leave the error in ec and return
        if( ec.failed() ) return r;
    }
}

Note that there is no longer any difference between POSIX and Windows implementations; their differences are contained in file::read and file::write. file_copy is portable and works under any platform.

The general pattern in writing such higher-level functions is that they pass the output error_code parameter ec they received from the caller directly as the output parameter to the lower-level functions they are built upon. This way, when they detect a failure in an intermediate operation (by testing ec.failed()), they can immediately return to the caller, because the error code is already in its proper place.

Note that file_copy doesn’t even need to clear ec on success, by using ec = {};. Since we’ve already tested ec.failed(), we know that ec contains a value that means success.

Providing Dual (Throwing and Nonthrowing) Overloads

Functions that signal errors via an output error_code& ec parameter require that the caller check ec after calling them, and take appropriate action (such as return immediately, as above.) Forgetting to check ec results in logic errors.

While this is a preferred coding style for some, others prefer exceptions, which one cannot forget to check.

An approach that has been introduced by Boost.Filesystem (which later turned into std::filesystem) is to provide both alternatives: a nonthrowing function taking error_code& ec, as file_copy above, and a throwing function that does not take an error_code output parameter, and throws exceptions on failure.

This is how this second throwing function is typically implemented:

std::size_t file_copy( file& src, file& dest )
{
    sys::error_code ec;
    std::size_t r = file_copy( src, dest, ec );

    if( ec.failed() ) throw sys::system_error( ec, __func__ );

    return r;
}

That is, we simply call the nonthrowing overload of file_copy, and if it signals failure in ec, throw a system_error exception.

We use our function name __func__ ("file_copy") as the prefix, although that’s a matter of taste.

Note that typically under this style the overloads taking error_code& ec are decorated with noexcept, so that it’s clear that they don’t throw exceptions (although we haven’t done so in the preceding examples in order to keep the code C++03-friendly.)

result<T> as an Alternative to Dual APIs

Instead of providing two functions for every operation, an alternative approach is to make the function return sys::result<T> instead of T. result<T> is a class holding either T or error_code, similar to variant<T, error_code>.

Clients that prefer to check for errors and not rely on exceptions can test whether a result<T> r contains a value via if( r ) or its more verbose equivalent if( r.has_value() ), then obtain the value via *r or r.value(). If r doesn’t contain a value, the error_code it holds can be obtained with r.error().

Those who prefer exceptions just call r.value() directly, without checking. In the no-value case, this will automatically throw a system_error corresponding to the error_code in r.

Assuming our base file API is unchanged, this variation of file_copy would look like this:

sys::result<std::size_t> file_copy( file& src, file& dest )
{
    std::size_t r = 0;
    sys::error_code ec;

    for( ;; )
    {
        unsigned char buffer[ 1024 ];

        std::size_t n = src.read( buffer, sizeof( buffer ), ec );

        if( ec.failed() ) return ec;
        if( n == 0 ) return r;

        r += dest.write( buffer, n, ec );

        if( ec.failed() ) return ec;
    }
}

The only difference here is that we return ec on error, instead of r.

Note, however, that we can no longer return both an error code and a number of transferred bytes; that is, we can no longer signal partial success. This is often not an issue at higher levels, but lower-level primitives such as file::read and file::write might be better off written using the old style.

Nevertheless, to demonstrate how result returning APIs are composed, we’ll show how file_copy would look if file::read and file::write returned result<size_t>:

class file
{
public:

    // ...

    sys::result<std::size_t> read( void * buffer, std::size_t size );
    sys::result<std::size_t> write( void const * buffer, std::size_t size );
};

sys::result<std::size_t> file_copy( file& src, file& dest )
{
    std::size_t m = 0;

    for( ;; )
    {
        unsigned char buffer[ 1024 ];

        auto r = src.read( buffer, sizeof( buffer ) );
        if( !r ) return r;

        std::size_t n = *r;
        if( n == 0 ) return m;

        auto r2 = dest.write( buffer, n );
        if( !r2 ) return r2;

        std::size_t n2 = *r2;
        m += n2;
    }
}

Testing for Specific Error Conditions

Let’s suppose that we have called a function that signals failure using error_code, we have passed it an error_code variable ec, and now for some reason want to check whether the function has failed with an error code of EINVAL, "invalid argument".

Since error_code can be compared for equality, our first instict might be if( ec == error_code( EINVAL, generic_category() ).

This is wrong, and we should never do it.

First, under POSIX, the function might have returned EINVAL from the system category (because the error might have been returned by an OS API, and not by the function itself, as was the case in our read and write implementations.)

Since error_code comparisons are exact, EINVAL from the generic category does not compare equal to EINVAL from the system category.

(And before you start thinking about just comparing ec.value() to EINVAL, read on.)

Second, under Windows, the function might have returned error_code( ERROR_INVALID_PARAMETER, system_category() ). As we have already mentioned, the integer error values in the system category under Windows are completely unrelated to the integer errno values.

The correct approach is to compare ec not to specific error codes, but to error_condition( EINVAL, generic_category() ). Error conditions are a platform-independent way to represent the meaning of the concrete error codes. In our case, all error codes, under both POSIX and Windows, that represent EINVAL will compare equal to error_condition( EINVAL, generic_category() ).

In short, you should never compare error codes to error codes, and should compare them to error conditions instead. This is the purpose of the error_condition class, which is very frequently misunderstood.

Since

if( ec == sys::error_condition( EINVAL, sys::generic_category() ) )
{
    // handle EINVAL
}

is a bit verbose, Boost.System provides enumerator values for the errno values against which an error code can be compared directly.

These enumerators are defined in <boost/system/errc.hpp>, and enable the above test to be written

if( ec == sys::errc::invalid_argument )
{
    // handle EINVAL
}

which is what one should generally use for testing for a specific error condition, as a best practice.

Adapting Existing Integer Error Values

Libraries with C (or extern "C") APIs often signal failure by returning a library-specific integer error code (with zero typically being reserved for "no error".) When writing portable C++ wrappers, we need to decide how to expose these error codes, and using error_code is a good way to do it.

Because the integer error codes are library specific, and in general match neither errno values or system category values, we need to define a library-specific error category.

Adapting SQLite Errors

We’ll take SQLite as an example. The general outline of a custom error category is as follows:

class sqlite3_category_impl: public sys::error_category
{
    // TODO add whatever's needed here
};

sys::error_category const& sqlite3_category()
{
    static const sqlite3_category_impl instance;
    return instance;
}

which can then be used similarly to the predefined generic and system categories:

int r = some_sqlite3_function( ... );
ec.assign( r, sqlite3_category() );

If we try to compile the above category definition as-is, it will complain about our not implementing two pure virtual member functions, name and message, so at minimum, we’ll need to add these. In addition, we’ll also implement the non-allocating overload of message. It’s not pure virtual, but its default implementation calls the std::string-returning overload, and that’s almost never what one wants. (This default implementation is only provided for backward compatibility, in order to not break existing user-defined categories that were written before this overload was added.)

So, the minimum we need to implement is this:

class sqlite3_category_impl: public sys::error_category
{
public:

    const char * name() const noexcept;
    std::string message( int ev ) const;
    char const * message( int ev, char * buffer, std::size_t len ) const noexcept;
};

name is easy, it just returns the category name:

const char * sqlite3_category_impl::name() const noexcept
{
    return "sqlite3";
}

message is used to obtain an error message given an integer error code. SQLite provides the function sqlite3_errstr for this, so we don’t need to do any work:

std::string sqlite3_category_impl::message( int ev ) const
{
    return sqlite3_errstr( ev );
}

char const * sqlite3_category_impl::message( int ev, char * buffer, std::size_t len ) const noexcept
{
    std::snprintf( buffer, len, "%s", sqlite3_errstr( ev ) );
    return buffer;
}

and we’re done. sqlite3_category() can now be used like the predefined categories, and we can put an SQLite error code int r into a Boost.System error_code ec by means of ec.assign( r, sqlite3_category() ).

Adapting ZLib Errors

Another widely used C library is ZLib, and the portion of zlib.h that defines its error codes is shown below:

#define Z_OK            0
#define Z_STREAM_END    1
#define Z_NEED_DICT     2
#define Z_ERRNO        (-1)
#define Z_STREAM_ERROR (-2)
#define Z_DATA_ERROR   (-3)
#define Z_MEM_ERROR    (-4)
#define Z_BUF_ERROR    (-5)
#define Z_VERSION_ERROR (-6)
/* Return codes for the compression/decompression functions. Negative values
 * are errors, positive values are used for special but normal events.
 */

There are three relevant differences with the previous case of SQLite:

  • While for SQLite all non-zero values were errors, as is the typical case, here negative values are errors, but positive values are "special but normal", that is, they represent success, not failure;

  • ZLib does not provide a function that returns the error message corresponding to a specific error code;

  • When Z_ERRNO is returned, the error code should be retrieved from errno.

Our category implementation will look like this:

class zlib_category_impl: public sys::error_category
{
public:

    const char * name() const noexcept;

    std::string message( int ev ) const;
    char const * message( int ev, char * buffer, std::size_t len ) const noexcept;

    bool failed( int ev ) const noexcept;
};

sys::error_category const& zlib_category()
{
    static const zlib_category_impl instance;
    return instance;
}

As usual, the implementation of name is trivial:

const char * zlib_category_impl::name() const noexcept
{
    return "zlib";
}

We’ll need to work a bit harder to implement message this time, as there’s no preexisting function to lean on:

char const * zlib_category_impl::message( int ev, char * buffer, std::size_t len ) const noexcept
{
    switch( ev )
    {
    case Z_OK:            return "No error";
    case Z_STREAM_END:    return "End of stream";
    case Z_NEED_DICT:     return "A dictionary is needed";
    case Z_ERRNO:         return "OS API error";
    case Z_STREAM_ERROR:  return "Inconsistent stream state or invalid argument";
    case Z_DATA_ERROR:    return "Data error";
    case Z_MEM_ERROR:     return "Out of memory";
    case Z_BUF_ERROR:     return "Insufficient buffer space";
    case Z_VERSION_ERROR: return "Library version mismatch";
    }

    std::snprintf( buffer, len, "Unknown zlib error %d", ev );
    return buffer;
}

This is a typical implementation of the non-throwing message overload. Note that message is allowed to return something different from buffer, which means that we can return character literals directly, without copying them into the supplied buffer first. This allows our function to return the correct message text even when the buffer is too small.

The std::string overload of message is now trivial:

std::string zlib_category_impl::message( int ev ) const
{
    char buffer[ 64 ];
    return this->message( ev, buffer, sizeof( buffer ) );
}

Finally, we need to implement failed, in order to override its default behavior of returning true for all nonzero values:

bool zlib_category_impl::failed( int ev ) const noexcept
{
    return ev < 0;
}

This completes the implementation of zlib_category() and takes care of the first two bullets above, but we still haven’t addressed the third one; namely, that we need to retrieve the error from errno in the Z_ERRNO case.

To do that, we’ll define a helper function that would be used to assign a ZLib error code to an error_code:

void assign_zlib_error( sys::error_code & ec, int r )
{
    if( r != Z_ERRNO )
    {
        ec.assign( r, zlib_category() );
    }
    else
    {
        ec.assign( errno, sys::generic_category() );
    }
}

so that, instead of using ec.assign( r, zlib_category() ) directly, code would do

int r = some_zlib_function( ... );
assign_zlib_error( ec, r );

We can stop here, as this covers everything we set out to do, but we can take an extra step and enable source locations for our error codes. For that, we’ll need to change assign_zlib_error to take a source_location:

void assign_zlib_error( sys::error_code & ec, int r, boost::source_location const* loc )
{
    if( r != Z_ERRNO )
    {
        ec.assign( r, zlib_category(), loc );
    }
    else
    {
        ec.assign( errno, sys::generic_category(), loc );
    }
}

Define a helper macro to avoid the boilerplate of defining the static constexpr source location object each time:

#define ASSIGN_ZLIB_ERROR(ec, r) { \
    BOOST_STATIC_CONSTEXPR boost::source_location loc = BOOST_CURRENT_LOCATION; \
    assign_zlib_error( ec, r, &loc ); }

And then use the macro instead of the function:

int r = some_zlib_function( ... );
ASSIGN_ZLIB_ERROR( ec, r );

Supporting Comparisons against Conditions

We notice that some of the ZLib error codes correspond to portable errno conditions. Z_STREAM_ERROR, for instance, is returned in cases where POSIX functions would have returned EINVAL; Z_MEM_ERROR is ENOMEM; and Z_BUF_ERROR, insufficient space in the output buffer to store the result, roughly corresponds to ERANGE, result out of range.

To encode this relationship, we need to implement either default_error_condition or equivalent in our category. Since we have a simple one to one mapping, the former will suffice:

class zlib_category_impl: public sys::error_category
{
public:

    const char * name() const noexcept;

    std::string message( int ev ) const;
    char const * message( int ev, char * buffer, std::size_t len ) const noexcept;

    bool failed( int ev ) const noexcept;

    sys::error_condition default_error_condition( int ev ) const noexcept;
};

The implementation is straightforward:

sys::error_condition zlib_category_impl::default_error_condition( int ev ) const noexcept
{
    switch( ev )
    {
    case Z_OK:            return sys::error_condition();
    case Z_STREAM_ERROR:  return sys::errc::invalid_argument;
    case Z_MEM_ERROR:     return sys::errc::not_enough_memory;
    case Z_BUF_ERROR:     return sys::errc::result_out_of_range;
    }

    return sys::error_condition( ev, *this );
}

Once this is added, we will be able to compare a ZLib error_code ec against errc enumerators:

if( ec == sys::errc::not_enough_memory )
{
    // Z_MEM_ERROR, or ENOMEM
}

Defining Library-Specific Error Codes

Let’s suppose that we are writing a library libmyimg for reading some hypothetical image format, and that we have defined the following API function for that:

namespace libmyimg
{

struct image;

void load_image( file& f, image& im, sys::error_code& ec );

} // namespace libmyimg

(using our portable file class from the preceding examples.)

Our hypothetical image format is simple, consisting of a fixed header, followed by the image data, so an implementation of load_image might have the following structure:

namespace libmyimg
{

struct image_header
{
    uint32_t signature;
    uint32_t width;
    uint32_t height;
    uint32_t bits_per_pixel;
    uint32_t channels;
};

void load_image_header( file& f, image_header& im, sys::error_code& ec );

struct image;

void load_image( file& f, image& im, sys::error_code& ec )
{
    image_header ih = {};
    load_image_header( f, ih, ec );

    if( ec.failed() ) return;

    if( ih.signature != 0xFF0AD71A )
    {
        // return an "invalid signature" error
    }

    if( ih.width == 0 )
    {
        // return an "invalid width" error
    }

    if( ih.height == 0 )
    {
        // return an "invalid height" error
    }

    if( ih.bits_per_pixel != 8 )
    {
        // return an "unsupported bit depth" error
    }

    if( ih.channels != 1 && ih.channels != 3 && ih.channels != 4 )
    {
        // return an "unsupported channel count" error
    }

    // initialize `im` and read image data

    // ...
}

} // namespace libmyimg

We can see that we need to define five error codes of our own. (Our function can also return other kinds of failures in ec — those will come from file::read which load_image_header will use to read the header.)

To define these errors, we’ll use a scoped enumeration type. (This example will take advantage of C++11 features.)

namespace libmyimg
{

enum class error
{
    success = 0,

    invalid_signature,
    invalid_width,
    invalid_height,
    unsupported_bit_depth,
    unsupported_channel_count
};

} // namespace libmyimg

Boost.System supports being told that an enumeration type represents an error code, which enables implicit conversions between the enumeration type and error_code. It’s done by specializing the is_error_code_enum type trait, which resides in namespace boost::system like the rest of the library:

namespace boost
{
namespace system
{

template<> struct is_error_code_enum< ::libmyimg::error >: std::true_type
{
};

} // namespace system
} // namespace boost

Once this is in place, we can now assign values of libmyimg::error to sys::error_code, which enables the implementation of load_image to be written as follows:

void load_image( file& f, image& im, sys::error_code& ec )
{
    image_header ih = {};
    load_image_header( f, ih, ec );

    if( ec.failed() ) return;

    if( ih.signature != 0xFF0AD71A )
    {
        ec = error::invalid_signature;
        return;
    }

    if( ih.width == 0 )
    {
        ec = error::invalid_width;
        return;
    }

    if( ih.height == 0 )
    {
        ec = error::invalid_height;
        return;
    }

    if( ih.bits_per_pixel != 8 )
    {
        ec = error::unsupported_bit_depth;
        return;
    }

    if( ih.channels != 1 && ih.channels != 3 && ih.channels != 4 )
    {
        ec = error::unsupported_channel_count;
        return;
    }

    // initialize `image` and read image data

    // ...
}

This is however not enough; we still need to define the error category for our enumerators, and associate them with it.

The first step follows our previous two examples very closely:

namespace libmyimg
{

class myimg_category_impl: public sys::error_category
{
public:

    const char * name() const noexcept;

    std::string message( int ev ) const;
    char const * message( int ev, char * buffer, std::size_t len ) const noexcept;
};

const char * myimg_category_impl::name() const noexcept
{
    return "libmyimg";
}

std::string myimg_category_impl::message( int ev ) const
{
    char buffer[ 64 ];
    return this->message( ev, buffer, sizeof( buffer ) );
}

char const * myimg_category_impl::message( int ev, char * buffer, std::size_t len ) const noexcept
{
    switch( static_cast<error>( ev ) )
    {
    case error::success:                   return "No error";
    case error::invalid_signature:         return "Invalid image signature";
    case error::invalid_width:             return "Invalid image width";
    case error::invalid_height:            return "Invalid image height";
    case error::unsupported_bit_depth:     return "Unsupported bit depth";
    case error::unsupported_channel_count: return "Unsupported number of channels";
    }

    std::snprintf( buffer, len, "Unknown libmyimg error %d", ev );
    return buffer;
}

sys::error_category const& myimg_category()
{
    static const myimg_category_impl instance;
    return instance;
}

} // namespace libmyimg

The second step involves implementing a function make_error_code in the namespace of our enumeration type error that takes error and returns boost::system::error_code:

namespace libmyimg
{

sys::error_code make_error_code( error e )
{
    return sys::error_code( static_cast<int>( e ), myimg_category() );
}

} // namespace libmyimg

Now load_image will compile, and we just need to fill the rest of its implementation with code that uses file::read to read the image data.

There’s one additional embellishment we can make. As we know, Boost.System was proposed for, and accepted into, the C++11 standard, and now there’s a standard implementation of it in <system_error>. We can make our error enumeration type compatible with std::error_code as well, by specializing the standard type trait std::is_error_code_enum:

namespace std
{

template<> struct is_error_code_enum< ::libmyimg::error >: std::true_type
{
};

} // namespace std

This makes our enumerators convertible to std::error_code.

(The reason this works is that boost::system::error_code is convertible to std::error_code, so the return value of our make_error_code overload can be used to initialize a std::error_code.)

Defining Library-Specific Error Conditions

All of the libmyimg::error error codes we have so far represent the same error condition - invalid or unsupported image format. It might make sense to enable testing for this condition without the need to enumerate all five specific codes. To do this, we can define an error condition enumeration type:

namespace libmyimg
{

enum class condition
{
    invalid_format = 1
};

} // namespace libmyimg

which we can tag as representing an error condition by specializing is_error_condition_enum:

namespace boost
{
namespace system
{

template<> struct is_error_condition_enum< ::libmyimg::condition >: std::true_type
{
};

} // namespace system
} // namespace boost

namespace std
{

template<> struct is_error_condition_enum< ::libmyimg::condition >: std::true_type
{
};

} // namespace std

Similarly to the error code enumeration type, which needed a make_error_code overload, this one will need to have a make_error_condition overload, and a category.

It’s in principle possible to reuse the category we already defined for our error codes, by making the condition values start from, say, 10000 instead of 1. This saves some typing, but a better practice is to use a separate category for the error conditions. So that’s what we’ll do:

namespace libmyimg
{

class myimg_condition_category_impl: public sys::error_category
{
public:

    const char * name() const noexcept;

    std::string message( int ev ) const;
    char const * message( int ev, char * buffer, std::size_t len ) const noexcept;
};

const char * myimg_condition_category_impl::name() const noexcept
{
    return "libmyimg_condition";
}

std::string myimg_condition_category_impl::message( int ev ) const
{
    char buffer[ 64 ];
    return this->message( ev, buffer, sizeof( buffer ) );
}

char const * myimg_condition_category_impl::message( int ev, char * buffer, std::size_t len ) const noexcept
{
    switch( static_cast<condition>( ev ) )
    {
    case condition::invalid_format: return "Invalid or unsupported image format";
    }

    std::snprintf( buffer, len, "Unknown libmyimg condition %d", ev );
    return buffer;
}

sys::error_category const& myimg_condition_category()
{
    static const myimg_condition_category_impl instance;
    return instance;
}

sys::error_condition make_error_condition( condition e )
{
    return sys::error_condition( static_cast<int>( e ), myimg_condition_category() );
}

} // namespace libmyimg

We have our condition, but it doesn’t do anything yet. To enable libmyimg::condition::invalid_format to compare equal to our error codes, we need to implement default_error_condition in the error code category:

namespace libmyimg
{

class myimg_category_impl: public sys::error_category
{
public:

    const char * name() const noexcept;

    std::string message( int ev ) const;
    char const * message( int ev, char * buffer, std::size_t len ) const noexcept;

    sys::error_condition default_error_condition( int ev ) const noexcept;
};

sys::error_condition myimg_category_impl::default_error_condition( int ev ) const noexcept
{
    switch( static_cast<error>( ev ) )
    {
    case error::success:

        return {};

    case error::invalid_signature:
    case error::invalid_width:
    case error::invalid_height:
    case error::unsupported_bit_depth:
    case error::unsupported_channel_count:

        return condition::invalid_format;
    }

    return sys::error_condition( ev, *this );
}

} // namespace libmyimg

That’s it; now ec == libmyimg::condition::invalid_format can be used to test whether ec contains one of our error codes corresponding to the "invalid image format" condition.

Revision History

Changes in Boost 1.78

  • Added support for source locations to error_code.

  • Added error_code::to_string, error_condition::to_string, error_code::what.

  • system_error::what() now contains the source location, if present.

  • Added result<T, E = error_code>, a class holding either a value or an error, defined in <boost/system/result.hpp>.

Changes in Boost 1.77

  • The conversion operator from error_category to std::error_category has been improved and no longer requires <map> or <mutex>.

  • The comparison operators of error_category are now inline friends instead of member functions (a side effect of the previous change.)

  • error_condition now defers calling generic_category() to avoid instantiating the object until it’s actually needed.

  • error_condition::failed and error_condition::message have been undeprecated, and operator bool() now once again returns failed().

  • The system category now doesn’t call generic_category(), to avoid instantiating the object.

  • The return value of default_error_condition changes in some cases into an error_condition from the generic category, instead of from the system category. This happens on POSIX when the input error_code is from the system category and does not correspond to any errc_t value.

  • The interoperability of error_code and std::error_code has been improved substantially. It is now possible to construct boost::system::error_code from std::error_code, and it’s possible to pass boost::system::error_code to functions taking std::error_code&.

  • A stream insertion operator for error_condition has been added.

Changes in Boost 1.76

  • windows_error.hpp is no longer deprecated.

Changes in Boost 1.75

  • The platform-specific headers windows_error.hpp, linux_error.hpp, and cygwin_error.hpp emit deprecation messages and are slated for removal.

  • The old names for generic_category() and system_category() emit deprecation messages and are slated for removal.

  • error_condition::failed is deprecated and is slated for removal. operator bool() for error_condition has been reverted to its old meaning of value() != 0. This is done for compatibility with std::error_condition as the next release is expected to improve interoperability with <system_error> even further. Note that this does not affect error_code::failed, which is still alive and well.

  • The overload of error_condition::message that takes a buffer is deprecated and is slated for removal, for the same reasons. Note that this does not affect error_code::message.

Changes in Boost 1.74

  • operator bool() now returns failed() instead of value() != 0.

Changes in Boost 1.69

  • Boost.System is now header-only. A stub library is still built for compatibility, but linking to it is no longer necessary.

  • Even more functions have been marked constexpr.

  • The destructor of error_category is now protected and no longer virtual. This is a potentially breaking change but its impact is expected to be limited.

  • error_category now has a constructor that accepts a 64 bit identifier, enabling distinct category objects to compare equal.

  • The constructors of error_category are now protected.

  • A non-allocating, nonthrowing overload of message has been added.

  • A virtual function failed has been added, allowing categories for which success is not synonymous with 0.

  • The deprecated boost::system::throws object has been removed.

  • boost::throws() is now deprecated and its use is discouraged.

  • The constructor of system_error taking a single error_code argument is now explicit.

  • system_error::code() now returns by value.

Changes in Boost 1.68

On a C++14 compiler, many Boost.System functions and member functions are now constexpr, and error_code and error_condition are literal classes.

In addition to enabling use in constant expressions (and constexpr functions), this significantly improves the quality of the generated code.

As a result of this change, however, now using Boost.System from C++14 or C++17 code requires that the library be also built with C++14 or above. This is the default on GCC 6 and newer, but not on GCC 5 or Clang. One can build Boost for C++14 by passing the cxxstd=14 option to b2.

(Previous versions allowed code built against any C++ standard to link with Boost.System built against any C++ standard. In 1.68, code using any C++ standard can link with Boost.System built with C++14 or above, but if Boost.System is built with C++11 or below, only code also built with C++11 and below can link to it successfully.)

Changes in Boost 1.65

On a C++11 compiler, Boost.System now provides implicit conversions from boost::system::error_category, error_code, and error_condition to their standard equivalents from <system_error>.

This allows libraries to expose a C++11 interface and report errors via std::error_code even when using Boost.System, directly or through a dependency such as Boost.ASIO.

Design Rationale

error_code and error_condition are designed as value types so they can be copied without slicing and do not require heap allocation, but still have polymorphic behavior based on the error category. This is achieved by abstract base class error_category supplying the polymorphic behavior, and error_code and error_condition containing a pointer to an object of a type derived from error_category.

Many of the detailed design decisions were driven by the requirements that users to be able to add additional error categories, and that it be no more difficult to write portable code than system-specific code.

The operator<< overload for error_code eliminates a misleading conversion to bool in code like cout << ec, where ec is of type error_code. It is also useful in its own right.

Reference

Use of C++11 and C++14 Features

The library is documented to use several C++11 and C++14 features, including noexcept, explicit conversion operators and constexpr. The actual implementation uses C++11 and C++14 features only when they are available, and otherwise falls back on C++03 features.

Macros

When BOOST_SYSTEM_ENABLE_DEPRECATED is defined, the library provides deprecated features for compatibility. These features are bound to eventually disappear.

When BOOST_SYSTEM_USE_UTF8 is defined, on Windows the library returns UTF-8 messages using code page CP_UTF8 instead of the default CP_ACP. This macro has no effect on POSIX.

Deprecated Names

In the process of adding Boost.System to the C++11 standard library, the C++ committee changed some names. To ease transition, Boost.System deprecates the old names, but will provide them when the macro BOOST_SYSTEM_ENABLE_DEPRECATED is defined.

Old usage, now deprecated Replacement

get_generic_category()

generic_category()

get_system_category()

system_category()

namespace posix

namespace errc

namespace posix_error

namespace errc

get_posix_category()

generic_category()

posix_category

generic_category()

errno_ecat

generic_category()

native_ecat

system_category()

<boost/system/​is_error_code_enum.hpp>

is_error_code_enum

namespace boost {
namespace system {

template<class T>
  struct is_error_code_enum { static const bool value = false; };

} // namespace system
} // namespace boost

Users may specialize is_error_code_enum for their error enumeration types to indicate that they should be eligible for automatic conversions to error_code. This conversion calls make_error_code(e), which should be provided in the same namespace as the enumeration type.

<boost/system/​is_error_condition_enum.hpp>

is_error_condition_enum

namespace boost {
namespace system {

template<class T>
  struct is_error_condition_enum { static const bool value = false; };

} // namespace system
} // namespace boost

Users may specialize is_error_condition_enum for their error enumeration types to indicate that they should be eligible for automatic conversions to error_condition. This conversion calls make_error_condition(e), which should be provided in the same namespace as the enumeration type.

<boost/system/​errc.hpp>

errc

namespace boost {
namespace system {

namespace errc {
  enum errc_t
  {
    success = 0,
    address_family_not_supported,   //EAFNOSUPPORT
    address_in_use,                 //EADDRINUSE
    address_not_available,          //EADDRNOTAVAIL
    already_connected,              //EISCONN
    argument_list_too_long,         //E2BIG
    argument_out_of_domain,         //EDOM
    bad_address,                    //EFAULT
    bad_file_descriptor,            //EBADF
    bad_message,                    //EBADMSG
    broken_pipe,                    //EPIPE
    connection_aborted,             //ECONNABORTED
    connection_already_in_progress, //EALREADY
    connection_refused,             //ECONNREFUSED
    connection_reset,               //ECONNRESET
    cross_device_link,              //EXDEV
    destination_address_required,   //EDESTADDRREQ
    device_or_resource_busy,        //EBUSY
    directory_not_empty,            //ENOTEMPTY
    executable_format_error,        //ENOEXEC
    file_exists,                    //EEXIST
    file_too_large,                 //EFBIG
    filename_too_long,              //ENAMETOOLONG
    function_not_supported,         //ENOSYS
    host_unreachable,               //EHOSTUNREACH
    identifier_removed,             //EIDRM
    illegal_byte_sequence,          //EILSEQ
    inappropriate_io_control_operation, //ENOTTY
    interrupted,                    //EINTR
    invalid_argument,               //EINVAL
    invalid_seek,                   //ESPIPE
    io_error,                       //EIO
    is_a_directory,                 //EISDIR
    message_size,                   //EMSGSIZE
    network_down,                   //ENETDOWN
    network_reset,                  //ENETRESET
    network_unreachable,            //ENETUNREACH
    no_buffer_space,                //ENOBUFS
    no_child_process,               //ECHILD
    no_link,                        //ENOLINK
    no_lock_available,              //ENOLCK
    no_message_available,           //ENODATA
    no_message,                     //ENOMSG
    no_protocol_option,             //ENOPROTOOPT
    no_space_on_device,             //ENOSPC
    no_stream_resources,            //ENOSR
    no_such_device_or_address,      //ENXIO
    no_such_device,                 //ENODEV
    no_such_file_or_directory,      //ENOENT
    no_such_process,                //ESRCH
    not_a_directory,                //ENOTDIR
    not_a_socket,                   //ENOTSOCK
    not_a_stream,                   //ENOSTR
    not_connected,                  //ENOTCONN
    not_enough_memory,              //ENOMEM
    not_supported,                  //ENOTSUP
    operation_canceled,             //ECANCELED
    operation_in_progress,          //EINPROGRESS
    operation_not_permitted,        //EPERM
    operation_not_supported,        //EOPNOTSUPP
    operation_would_block,          //EWOULDBLOCK
    owner_dead,                     //EOWNERDEAD
    permission_denied,              //EACCES
    protocol_error,                 //EPROTO
    protocol_not_supported,         //EPROTONOSUPPORT
    read_only_file_system,          //EROFS
    resource_deadlock_would_occur,  //EDEADLK
    resource_unavailable_try_again, //EAGAIN
    result_out_of_range,            //ERANGE
    state_not_recoverable,          //ENOTRECOVERABLE
    stream_timeout,                 //ETIME
    text_file_busy,                 //ETXTBSY
    timed_out,                      //ETIMEDOUT
    too_many_files_open_in_system,  //ENFILE
    too_many_files_open,            //EMFILE
    too_many_links,                 //EMLINK
    too_many_symbolic_link_levels,  //ELOOP
    value_too_large,                //EOVERFLOW
    wrong_protocol_type             //EPROTOTYPE
  };

} // namespace errc

template<> struct is_error_condition_enum<errc::errc_t>
  { static const bool value = true; };

constexpr error_code make_error_code( errc::errc_t e ) noexcept;
constexpr error_condition make_error_condition( errc::errc_t e ) noexcept;

} // namespace system
} // namespace boost

The predefined enumeration type errc::errc_t provides named constants corresponding to the values of the <cerrno> macros.

constexpr error_condition make_error_condition( errc::errc_t e ) noexcept;
  • Returns:

    error_condition( e, generic_category() ).

    Since errc::errc_t provides a specialization of is_error_condition_enum and an overload of make_error_condition, it can be converted implicitly to an error_condition. This is typically useful when comparing error_code values returned from APIs to a portable condition, as in the below example:

  • void api_function( boost::system::error_code& ec );
    
    void my_function()
    {
        boost::system::error_code ec;
        api_function( ec );
    
        if( ec == boost::system::errc::no_such_file_or_directory )
        {
            // an entity wasn't found (ENOENT)
            // handle this condition
        }
    }
constexpr error_code make_error_code( errc::errc_t e ) noexcept;
  • Returns:

    error_code( e, generic_category() ).

    In addition to make_error_condition, errc::errc_t provides an overload of make_error_code. This allows the creation of generic error codes, an operation typically useful when a function needs to signal a generic failure that does not come from an underlying API, such as for instance an out of memory condition:

  • void my_api_function( boost::system::error_code& ec )
    {
        void* p = std::malloc( 16 );
    
        if( p == 0 )
        {
            // return ENOMEM
            ec = make_error_code( boost::system::errc::out_of_memory );
            return;
        }
    
        // use p
    }

<boost/system/​error_category.hpp>

error_category

The class error_category defines the base class for types used to identify the source and encoding of a particular category of error code.

Classes may be derived from error_category to support categories of errors in addition to those defined in Boost.System.

namespace boost {
namespace system {

class error_category
{
public: // noncopyable

    error_category( error_category const & ) = delete;
    error_category& operator=( error_category const & ) = delete;

protected:

    ~error_category() = default;

    constexpr error_category() noexcept;
    explicit constexpr error_category( unsigned long long id ) noexcept;

public:

    virtual const char * name() const noexcept = 0;

    virtual error_condition default_error_condition( int ev ) const noexcept;

    virtual bool equivalent( int code, const error_condition & condition )
      const noexcept;
    virtual bool equivalent( const error_code & code, int condition )
      const noexcept;

    virtual std::string message( int ev ) const = 0;
    virtual char const * message( int ev, char * buffer, std::size_t len )
      const noexcept;

    virtual bool failed( int ev ) const noexcept;

    friend constexpr bool operator==( const error_category & lhs,
      const error_category & rhs ) noexcept;
    friend constexpr bool operator!=( const error_category & lhs,
      const error_category & rhs ) noexcept;

    friend constexpr bool operator< ( const error_category & lhs,
      const error_category & rhs ) noexcept;

    operator std::error_category const & () const;

private:

    unsigned long long id_; // exposition only
};

} // namespace system
} // namespace boost
Constructors
constexpr error_category() noexcept;
  • Effects:

    Initializes id_ to 0.

    Remarks:

    Since equivalence for categories that do not have an identifier is based on comparing object addresses, a user-defined derived category of type C that uses this constructor should ensure that only one object of type C exists in the program.

explicit constexpr error_category( unsigned long long id ) noexcept;
  • Effects:

    Initializes id_ to id.

    Remarks:

    User-defined derived categories that use this constructor are considered equivalent when their identifiers match. Therefore, those categories may have more than one instance existing in a program, but to minimize the possibility of collision, their identifiers must be randomly chosen (at the time the category is implemented, not at runtime). One way of generating a 64 bit random identifier is https://www.random.org/cgi-bin/randbyte?nbytes=8&format=h.

Virtuals
virtual const char * name() const noexcept = 0;
  • Returns:

    In derived classes, a character literal naming the error category.

virtual error_condition default_error_condition( int ev ) const noexcept;
  • Returns:
    • In derived classes, an error condition corresponding to ev. The returned error condition will typically come from the generic category.

    • In the default implementation, error_condition( ev, *this ).

virtual bool equivalent( int code, const error_condition & condition )
  const noexcept;
  • Returns:
    • In derived classes, true when error_code( code, *this ) is equivalent to condition.

    • In the default implementation, default_error_condition( code ) == condition.

virtual bool equivalent( const error_code & code, int condition )
  const noexcept;
  • Returns:
    • In derived classes, true when code is equivalent to error_condition( condition, *this ).

    • In the default implementation, *this == code.category() && code.value() == condition.

virtual std::string message( int ev ) const = 0;
  • Returns:

    In derived classes, a string that describes the error denoted by ev.

virtual char const * message( int ev, char * buffer, std::size_t len )
  const noexcept;
  • Effects:
    • Derived classes should either

      • return a pointer to a character literal describing the error denoted by ev, or

      • copy a string describing the error into buffer, truncating it to len-1 characters and storing a null terminator, and return buffer. If len is 0, nothing is copied, but the function still returns buffer. Note that when len is 0, buffer may be nullptr.

    • The default implementation calls message(ev) and copies the result into buffer, truncating it to len-1 characters and storing a null terminator. If len is 0, copies nothing. Returns buffer. If message(ev) throws an exception, the string "Message text unavailable" is used.

    Example:
    const char* my_category::message(int ev, char* buffer, size_t len) const noexcept
    {
        switch(ev)
        {
        case 0: return "no error";
        case 1: return "voltage out of range";
        case 2: return "impedance mismatch";
    
        case 31:
        case 32:
        case 33:
    
            std::snprintf(buffer, len, "component %d failure", ev-30);
            return buffer;
    
        default:
    
            std::snprintf(buffer, len, "unknown error %d", ev);
            return buffer;
        }
    }
virtual bool failed( int ev ) const noexcept;
  • Returns:
    • In derived classes, true when ev represents a failure.

    • In the default implementation, ev != 0.

    Remarks:

    All calls to this function with the same ev must return the same value.

Comparisons
friend constexpr bool operator==( const error_category & lhs,
  const error_category & rhs ) noexcept;
  • Returns:

    rhs.id_ == 0? &lhs == &rhs: lhs.id_ == rhs.id_.

    Remarks:

    Two category objects are considered equivalent when they have matching nonzero identifiers, or are the same object.

friend constexpr bool operator!=( const error_category & lhs,
  const error_category & rhs ) noexcept;
  • Returns:

    !( lhs == rhs ).

constexpr bool operator< ( const error_category & lhs,
  const error_category & rhs ) const noexcept;
  • Returns:
    • If lhs.id_ < rhs.id_, true;

    • Otherwise, if lhs.id_ > rhs.id_, false;

    • Otherwise, if rhs.id_ != 0, false;

    • Otherwise, std::less<error_category const *>()( &lhs, &rhs ).

Conversions
operator std::error_category const & () const;
  • Returns:

    A reference to an std::error_category object corresponding to *this.

<boost/system/​system_category.hpp>

system_category

namespace boost {
namespace system {

constexpr const error_category & system_category() noexcept;

} // namespace system
} // namespace boost
constexpr const error_category & system_category() noexcept;
  • Returns:

    A reference to a predefined error_category object identifying errors originating from the operating system.

<boost/system/​generic_category.hpp>

generic_category

namespace boost {
namespace system {

constexpr const error_category & generic_category() noexcept;

} // namespace system
} // namespace boost
constexpr const error_category & generic_category() noexcept;
  • Returns:

    A reference to a predefined error_category object identifying portable error codes and conditions.

<boost/system/​error_code.hpp>

error_code

The class error_code describes an object used to hold error code values, such as those originating from the operating system or other low-level application program interfaces. It’s an adjunct to error reporting by exception.

namespace boost {
namespace system {

class error_code {
public:

    // constructors

    constexpr error_code() noexcept;
    constexpr error_code( int val, const error_category & cat ) noexcept;

    error_code( int val, const error_category & cat,
      boost::source_location const * loc ) noexcept;

    template<class ErrorCodeEnum>
      constexpr error_code( ErrorCodeEnum e ) noexcept;

    template<class ErrorCodeEnum>
      error_code( ErrorCodeEnum e, boost::source_location const * loc )
        noexcept;

    error_code( std::error_code const& ec ) noexcept;

    // modifiers

    constexpr void assign( int val, const error_category & cat ) noexcept;

    void assign( int val, const error_category & cat,
      boost::source_location const * loc ) noexcept;

    template<class ErrorCodeEnum>
      constexpr error_code & operator=( ErrorCodeEnum e ) noexcept;

    template<class ErrorCodeEnum>
      void assign( ErrorCodeEnum e,
        boost::source_location const * loc ) noexcept;

    constexpr void clear() noexcept;

    // observers

    constexpr int value() const noexcept;
    constexpr const error_category & category() const noexcept;

    error_condition default_error_condition() const noexcept;

    std::string message() const;
    char const * message( char * buffer, std::size_t len ) const noexcept;

    constexpr bool failed() const noexcept;
    constexpr explicit operator bool() const noexcept;

    bool has_location() const noexcept;
    boost::source_location const & location() const noexcept;

    // comparisons

    friend constexpr bool operator==( const error_code & lhs,
      const error_code & rhs ) noexcept;

    friend constexpr bool operator!=( const error_code & lhs,
      const error_code & rhs ) noexcept;

    friend constexpr bool operator<( const error_code & lhs,
      const error_code & rhs ) noexcept;

    friend bool operator==( const error_code & code,
      const error_condition & condition ) noexcept;
    friend bool operator==( const error_condition & condition,
      const error_code & code ) noexcept;

    friend bool operator!=( const error_code & code,
      const error_condition & condition ) noexcept;
    friend bool operator!=( const error_condition & condition,
      const error_code & code ) noexcept;

    friend bool operator==( const error_code & lhs,
      const std::error_code & rhs ) noexcept;
    friend bool operator==( const std::error_code & lhs,
      const error_code & rhs ) noexcept;

    friend bool operator!=( const error_code & lhs,
      const std::error_code & rhs ) noexcept;
    friend bool operator!=( const std::error_code & lhs,
      const error_code & rhs ) noexcept;

    template<class E>
      friend constexpr bool operator==( const error_code & lhs, E rhs ) noexcept;
    template<class E>
      friend constexpr bool operator==( E lhs, const error_code & rhs ) noexcept;

    template<class E>
      friend constexpr bool operator!=( const error_code & lhs, E rhs ) noexcept;
    template<class E>
      friend constexpr bool operator!=( E lhs, const error_code & rhs ) noexcept;

    // conversions

    operator std::error_code() const;
    operator std::error_code();
    template<class T> operator T& (); // only when T=std::error_code

    // to_string

    std::string to_string() const;

    // stream insertion

    template<class charT, class traits>
      friend std::basic_ostream<charT, traits>&
        operator<<( basic_ostream<charT, traits>& os, const error_code & ec );

    // what

    std::string what() const;
};

// non-member functions

std::size_t hash_value( const error_code & ec );

} // namespace system
} // namespace boost
Constructors
constexpr error_code() noexcept;
  • Ensures:

    value() == 0; category() == system_category(); !has_location().

constexpr error_code( int val, const error_category & cat ) noexcept;
  • Ensures:

    value() == val; category() == cat; !has_location().

error_code( int val, const error_category & cat,
  boost::source_location const * loc ) noexcept;
  • Requires:

    loc points to a valid boost::source_location object with static storage duration.

    Ensures:

    value() == val; category() == cat; has_location(); &location() == loc.

template<class ErrorCodeEnum>
  constexpr error_code( ErrorCodeEnum e ) noexcept;
  • Ensures:

    *this == make_error_code( e ).

    Remarks:

    This constructor is only enabled when is_error_code_enum<ErrorCodeEnum>::value is true.

template<class ErrorCodeEnum>
  error_code( ErrorCodeEnum e, boost::source_location const * loc ) noexcept;
  • Requires:

    loc points to a valid boost::source_location object with static storage duration.

    Ensures:

    *this == make_error_code( e ).

    Remarks:

    This constructor is only enabled when is_error_code_enum<ErrorCodeEnum>::value is true. When make_error_code( e ) is not a default-constructed error_code and doesn’t wrap a std::error_code, has_location() is true and &location() is loc.

error_code( std::error_code const & ec ) noexcept;
  • Effects:

    Construct an error_code that wraps ec.

    Remarks:

    value() and category() are unspecified. has_location() is false.

Modifiers
constexpr void assign( int val, const error_category & cat ) noexcept;
  • Effects:

    *this = error_code( val, cat ).

void assign( int val, const error_category & cat,
  boost::source_location const * loc ) noexcept;
  • Effects:

    *this = error_code( val, cat, loc ).

template<class ErrorCodeEnum>
  constexpr error_code & operator=( ErrorCodeEnum e ) noexcept;
  • Ensures:

    *this == make_error_code( e ).

    Remarks:

    This operator is only enabled when is_error_code_enum<ErrorCodeEnum>::value is true.

template<class ErrorCodeEnum>
  void assign( ErrorCodeEnum e,
    boost::source_location const * loc ) noexcept;
  • Requires:

    loc points to a valid boost::source_location object with static storage duration.

    Effects:

    *this = error_code( e, loc ).

    Remarks:

    This function is only enabled when is_error_code_enum<ErrorCodeEnum>::value is true.

constexpr void clear() noexcept;
  • Effects:

    *this = error_code().

Observers
constexpr int value() const noexcept;
  • Returns:

    the error value.

constexpr const error_category & category() const noexcept;
  • Returns:

    the error category.

error_condition default_error_condition() const noexcept;
  • Returns:

    category().default_error_condition( value() ).

std::string message() const;
  • Returns:

    If *this wraps a std::error_code object ec, ec.message(). Otherwise, category().message( value() ).

char const * message( char * buffer, std::size_t len ) const noexcept;
  • Effects:

    If *this wraps a std::error_code object ec, copies the string returned from ec.message() into buffer and returns buffer. Otherwise, returns category().message( value(), buffer, len ).

constexpr bool failed() const noexcept;
  • Returns:

    If *this wraps a std::error_code object ec, ec.value() != 0. Otherwise, category().failed( value() ).

constexpr explicit operator bool() const noexcept;
  • Returns:

    failed().

bool has_location() const noexcept;
  • Returns:

    true if *this has been constructed with a pointer to a source location, false otherwise.

boost::source_location const & location() const noexcept;
  • Returns:

    *loc if *this has been constructed with a pointer to a source location loc, a reference to a default-constructed boost::source_location otherwise.

Comparisons
friend constexpr bool operator==( const error_code & lhs,
  const error_code & rhs ) noexcept;
  • Returns:

    If both lhs and rhs wrap std::error_code objects e1 and e2, e1 == e2. Otherwise, lhs.value() == rhs.value() && lhs.category() == rhs.category().

friend constexpr bool operator!=( const error_code & lhs,
  const error_code & rhs ) noexcept;
  • Returns:

    !( lhs == rhs ).

friend constexpr bool operator<( const error_code & lhs,
  const error_code & rhs ) noexcept;
  • Returns:

    If both lhs and rhs wrap std::error_code objects e1 and e2, e1 < e2. Otherwise, lhs.category() < rhs.category() || (lhs.category() == rhs.category() && lhs.value() < rhs.value()).

friend bool operator==( const error_code & code,
  const error_condition & condition ) noexcept;
friend bool operator==( const error_condition & condition,
  const error_code & code ) noexcept;
  • Returns:

    If code wraps a std::error_code object ec, ec == static_cast<std::error_condition>( condition ). Otherwise, code.category().equivalent( code.value(), condition ) || condition.category().equivalent( code, condition.value() ).

friend bool operator!=( const error_code & lhs,
  const error_condition & rhs ) noexcept;
friend bool operator!=( const error_condition & lhs,
  const error_code & rhs ) noexcept;
  • Returns:

    !( lhs == rhs ).

friend bool operator==( const error_code & lhs,
  const std::error_code & rhs ) noexcept;
  • Returns:

    static_cast<std::error_code>(lhs) == rhs.

friend bool operator==( const std::error_code & lhs,
  const error_code & rhs ) noexcept;
  • Returns:

    lhs == static_cast<std::error_code>(rhs).

friend bool operator!=( const error_code & lhs,
  const std::error_code & rhs ) noexcept;
friend bool operator!=( const std::error_code & lhs,
  const error_code & rhs ) noexcept;
  • Returns:

    !( lhs == rhs ).

template<class E>
  friend constexpr bool operator==( const error_code & lhs, E rhs ) noexcept;
  • Effects:
    • When is_error_code_enum<E>::value is true, returns lhs == make_error_code(rhs);

    • When is_error_condition_enum<E>::value is true, returns lhs == make_error_condition(rhs);

    • Otherwise, this overload is disabled.

template<class E>
  friend constexpr bool operator==( E lhs, const error_code & rhs ) noexcept;
  • Effects:
    • When is_error_code_enum<E>::value is true, returns make_error_code(lhs) == rhs;

    • When is_error_condition_enum<E>::value is true, returns make_error_condition(lhs) == rhs;

    • Otherwise, this overload is disabled.

template<class E>
  friend constexpr bool operator!=( const error_code & lhs, E rhs ) noexcept;
template<class E>
  friend constexpr bool operator!=( E lhs, const error_code & rhs ) noexcept;
  • Returns:

    !( lhs == rhs ).

    Remarks:

    These overloads are only enabled when is_error_code_enum<E>::value is true or is_error_condition_enum<E>::value is true.

Conversions
operator std::error_code() const;
operator std::error_code();
  • Returns:

    If *this wraps a std::error_code object ec, ec. Otherwise, std::error_code( value(), category() ).

template<class T> operator T&();
  • Effects:

    If *this wraps a std::error_code object ec, returns a reference to ec. Otherwise, makes *this wrap std::error_code( *this ), then returns a reference to it.

    Remarks:

    This operator is only enabled when T is std::error_code.

to_string
std::string to_string() const;
  • Returns:

    If *this wraps a std::error_code object e2, a string that is the concatenation of "std:", e2.category().name(), ':', and the string representation of e2.value(). Otherwise, the concatenation of category().name(), ':', and the string representation of value().

Stream Insertion
template <class charT, class traits>
  std::basic_ostream<charT, traits>&
    operator<<( basic_ostream<charT, traits>& os, const error_code & ec );
  • Effects:

    os << to_string().

    Returns:

    os.

what
std::string what() const;
  • Returns:

    A string representation of *this, suitable for logging and diagnostic output. Typically incorporates message(), to_string(), and location().to_string() (if available.)

Nonmembers
std::size_t hash_value( const error_code & ec );
  • Returns:

    If ec wraps a std::error_code object e2, std::hash<std::error_code>()(e2). Otherwise, a hash value representing ec.

<boost/system/​error_condition.hpp>

error_condition

namespace boost {
namespace system {

class error_condition {
public:

    // constructors

    constexpr error_condition() noexcept;
    constexpr error_condition( int val, const error_category & cat ) noexcept;

    template <class ErrorConditionEnum>
      constexpr error_condition( ErrorConditionEnum e ) noexcept;

    // modifiers

    constexpr void assign( int val, const error_category & cat ) noexcept;

    template<typename ErrorConditionEnum>
      constexpr error_condition & operator=( ErrorConditionEnum e ) noexcept;

    constexpr void clear() noexcept;

    // observers

    constexpr int value() const noexcept;
    constexpr const error_category & category() const noexcept;

    std::string message() const;
    char const * message( char * buffer, std::size_t len ) const noexcept;

    constexpr bool failed() const noexcept;
    constexpr explicit operator bool() const noexcept;

    // comparisons

    friend constexpr bool operator==( const error_condition & lhs,
      const error_condition & rhs ) noexcept;

    friend constexpr bool operator!=( const error_condition & lhs,
      const error_condition & rhs ) noexcept;

    friend constexpr bool operator<( const error_condition & lhs,
      const error_condition & rhs ) noexcept;

    friend bool operator==( const std::error_code & code,
      const error_condition & condition ) noexcept;
    friend bool operator==( const error_condition & condition,
      const std::error_code & code ) noexcept;

    friend bool operator!=( const std::error_code & code,
      const error_condition & condition ) noexcept;
    friend bool operator!=( const error_condition & condition,
      const std::error_code & code ) noexcept;

    // conversions

    operator std::error_condition() const;

    // to_string

    std::string to_string() const;

    // stream insertion

    template <class charT, class traits>
      friend std::basic_ostream<charT, traits>&
        operator<<( basic_ostream<charT, traits>& os, const error_condition & en );
};

} // namespace system
} // namespace boost
Constructors
constexpr error_condition() noexcept;
  • Ensures:

    value() == 0; category() == generic_category().

constexpr error_condition( int val, const error_category & cat ) noexcept;
  • Ensures:

    value() == val; category() == cat.

template <class ErrorConditionEnum>
  constexpr error_condition( ErrorConditionEnum e ) noexcept;
  • Ensures:

    *this == make_error_condition( e ).

    Remarks:

    This constructor is only enabled when is_error_condition_enum<ErrorConditionEnum>::value is true.

Modifiers
constexpr void assign( int val, const error_category & cat ) noexcept;
  • Ensures:

    value() == val; category() == cat.

template <class ErrorConditionEnum>
  constexpr error_condition & operator=( ErrorConditionEnum e ) noexcept;
  • Ensures:

    *this == make_error_condition( e ).

    Remarks:

    This operator is only enabled when is_error_condition_enum<ErrorConditionEnum>::value is true.

constexpr void clear() noexcept;
  • Ensures:

    value() == 0; category() == generic_category().

Observers
constexpr int value() const noexcept;
  • Returns:

    the error value.

constexpr const error_category & category() const noexcept;
  • Returns:

    the error category.

std::string message() const;
  • Returns:

    category().message( value() ).

char const * message( char * buffer, std::size_t len ) const noexcept;
  • Returns:

    category().message( value(), buffer, len ).

constexpr bool failed() const noexcept;
  • Returns:

    category().failed( value() ).

constexpr explicit operator bool() const noexcept;
  • Returns:

    failed().

Comparisons
friend constexpr bool operator==( const error_condition & lhs,
  const error_condition & rhs ) noexcept;
  • Returns:

    lhs.value() == rhs.value() && lhs.category() == rhs.category().

friend constexpr bool operator!=( const error_condition & lhs,
  const error_condition & rhs ) noexcept;
  • Returns:

    !( lhs == rhs ).

friend constexpr bool operator<( const error_condition & lhs,
  const error_condition & rhs ) noexcept;
  • Returns:

    lhs.category() < rhs.category() || (lhs.category() == rhs.category() && lhs.value() < rhs.value()).

friend bool operator==( const std::error_code & code,
  const error_condition & condition ) noexcept;
friend bool operator==( const error_condition & condition,
  const std::error_code & code ) noexcept;
  • Returns:

    code == static_cast<std::error_condition>( rhs ).

friend constexpr bool operator!=( const std::error_code & lhs,
  const error_condition & rhs ) noexcept;
friend constexpr bool operator!=( const error_condition & lhs,
  const std::error_code & rhs ) noexcept;
  • Returns:

    !( lhs == rhs ).

Conversions
operator std::error_condition() const;
  • Returns:

    std::error_condition( value(), category() ).

to_string
std::string to_string() const;
  • Returns:

    The concatenation of "cond:", category().name(), ':', and the string representation of value().

Stream Insertion
template <class charT, class traits>
  std::basic_ostream<charT, traits>&
    operator<<( basic_ostream<charT, traits>& os, const error_condition & en );
  • Effects:

    os << en.to_string().

    Returns:

    os.

<boost/system/​system_error.hpp>

system_error

The class system_error describes an exception object used to report errors that have an associated error_code. Such errors typically originate from operating system or other low-level application program interfaces.

namespace boost {
namespace system {

class system_error: public std::runtime_error
{
public:

    explicit system_error( error_code ec );
    system_error( error_code ec, const char * what_arg );
    system_error( error_code ec, const std::string & what_arg );

    system_error( int ev, const error_category & ecat );
    system_error( int ev, const error_category & ecat,
      const char * what_arg );
    system_error( int ev, const error_category & ecat,
      const std::string & what_arg );

    error_code code() const noexcept;
    const char * what() const noexcept;
};

} // namespace system
} // namespace boost
Constructors
explicit system_error( error_code ec );
system_error( error_code ec, const char * what_arg );
system_error( error_code ec, const std::string & what_arg );
  • Ensures:

    code() == ec.

system_error( int ev, const error_category & ecat,
  const char * what_arg );
system_error( int ev, const error_category & ecat,
  const std::string & what_arg );
system_error( int ev, const error_category & ecat );
  • Ensures:

    code() == error_code( ev, ecat ).

Observers
error_code code() const noexcept;
  • Returns:

    ec or error_code( ev, ecat ), from the constructor, as appropriate.

const char * what() const noexcept;
  • Returns:

    A null-terminated character string incorporating the arguments supplied in the constructor, typically of the form what_arg + ": " + code().message().

<boost/system/result.hpp>

This header defines the class template result<T, E>. Unlike the rest of the library, it requires C++11.

Synopsis

namespace boost {
namespace system {

// throw_exception_from_error

BOOST_NORETURN inline void throw_exception_from_error( error_code const & e );

// in_place_*

using in_place_value_t = /*unspecified*/;
constexpr in_place_value_t in_place_value{};

using in_place_error_t = /*unspecified*/;
constexpr in_place_error_t in_place_error{};

// result

template<class T, class E = error_code> class result;
template<class E> class result<void, E>;

} // namespace system
} // namespace boost

throw_exception_from_error

The function throw_exception_from_error is called by result<T, E>::value() when the result holds an error. Its purpose is to throw an exception that represents the error held in the result.

An implementation for the common and default case where E is error_code is already provided. It throws system_error(e).

If result<T, E> is used with other error types, the user is expected to provide an appropriate overload of throw_exception_from_error in the namespace of E.

BOOST_NORETURN inline void throw_exception_from_error( error_code const & e );
  • Effects:

    boost::throw_exception( system_error( e ) ).

result<T, E>

result<T, E> stores either a value of type T, or an error of type E. E defaults to error_code. In a typical use, functions that can fail return result<T>.

namespace boost {
namespace system {

template<class T, class E = error_code> class result
{
public:

    // constructors

    constexpr result();

    template<class... A>
      constexpr result( A&&... a );

    template<class... A>
      constexpr result( in_place_value_t, A&&... a );

    template<class... A>
      constexpr result( in_place_error_t, A&&... a );

    // queries

    constexpr bool has_value() const noexcept;
    constexpr bool has_error() const noexcept;
    constexpr explicit operator bool() const noexcept;

    // checked value access

    constexpr T& value() & ;
    constexpr T const& value() const& ;
    constexpr T&& value() && ;
    constexpr T const&& value() const&& ;

    // unchecked value access

    constexpr T* operator->() noexcept;
    constexpr T const* operator->() const noexcept;

    constexpr T& operator*() & noexcept;
    constexpr T const& operator*() const & noexcept;
    constexpr T&& operator*() && noexcept;
    constexpr T const&& operator*() const && noexcept;

    // error access

    constexpr E error() const;

    // swap

    constexpr void swap( result& r );
    friend constexpr void swap( result & r1, result & r2 );

    // equality

    friend constexpr bool operator==( result const & r1, result const & r2 );
    friend constexpr bool operator!=( result const & r1, result const & r2 );
};

// stream insertion

template<class Ch, class Tr, class T, class E>
  std::basic_ostream<Ch, Tr>&
    operator<<( std::basic_ostream<Ch, Tr>& os, result<T, E> const & r );

} // namespace system
} // namespace boost
Constructors
constexpr result();
  • Ensures:

    *this holds the value T().

    Remarks:

    This constructor is only enabled when std::is_default_constructible<T>::value is true.

template<class... A>
  constexpr result( A&&... a );
  • Effects:
    • If std::is_constructible<T, A…​>::value && !std::is_constructible<E, A…​>::value, ensures that *this holds the value T( std::forward<A>(a)…​ ).

    • If std::is_constructible<E, A…​>::value && !std::is_constructible<T, A…​>::value, ensures that *this holds the error E( std::forward<A>(a)…​ ).

    • Otherwise, this constructor does not participate in overload resolution.

    Remarks:

    This constructor is only enabled when sizeof…​(T) > 0.

template<class... A>
  constexpr result( in_place_value_t, A&&... a );
  • Ensures:

    *this holds the value T( std::forward<A>(a)…​ ).

    Remarks:

    This constructor is only enabled when std::is_constructible<T, A…​>::value is true.

template<class... A>
  constexpr result( in_place_error_t, A&&... a );
  • Ensures:

    *this holds the error E( std::forward<A>(a)…​ ).

    Remarks:

    This constructor is only enabled when std::is_constructible<E, A…​>::value is true.

Queries
constexpr bool has_value() const noexcept;
  • Returns:

    true when *this holds a value, false otherwise.

constexpr bool has_error() const noexcept;
  • Returns:

    !has_value().

constexpr explicit operator bool() const noexcept;
  • Returns:

    has_value().

Checked Value Access
constexpr T& value() & ;
constexpr T const& value() const& ;
constexpr T&& value() && ;
constexpr T const&& value() const&& ;
  • Effects:

    If *this holds a value, returns a reference to it. Otherwise, calls throw_exception_from_error, passing it a reference to the held error.

Unchecked Value Access
constexpr T* operator->() noexcept;
constexpr T const* operator->() const noexcept;
  • Returns:

    If *this holds a value, a pointer to it. Otherwise, nullptr.

constexpr T& operator*() & noexcept;
constexpr T const& operator*() const & noexcept;
  • Requires:

    *this holds a value.

    Returns:

    *operator->().

constexpr T&& operator*() && noexcept;
constexpr T const&& operator*() const && noexcept;
  • Requires:

    *this holds a value.

    Returns:

    std::move( *operator->() ).

Error Access
constexpr E error() const;
  • Effects:

    If *this holds an error, returns it. Otherwise, returns E().

swap
constexpr void swap( result& r );
  • Effects:

    Exchanges the contents of *this and r.

friend constexpr void swap( result & r1, result & r2 );
  • Effects:

    Exchanges the contents of r1 and r2.

Equality
friend constexpr bool operator==( result const & r1, result const & r2 );
  • Effects:
    • If r1 holds a value t1 and r2 holds a value t2, returns t1 == t2.

    • If r1 holds an error e1 and r2 holds an error e2, returns e1 == e2.

    • Otherwise, returns false.

friend constexpr bool operator!=( result const & r1, result const & r2 );
  • Returns:

    !( r1 == r2 ).

Stream Insertion
template<class Ch, class Tr, class T, class E>
  std::basic_ostream<Ch, Tr>&
    operator<<( std::basic_ostream<Ch, Tr>& os, result<T, E> const & r );
  • Effects:
    • If *this holds a value t, os << "value:" << t.

    • If *this holds an error e, os << "error:" << e.

    Returns:

    os.

result<void, E>

namespace boost {
namespace system {

template<class E> class result<void, E>
{
public:

    // constructors

    constexpr result() noexcept;

    template<class... A>
      constexpr result( A&&... a );

    constexpr result( in_place_value_t ) noexcept;

    template<class... A>
      constexpr result( in_place_error_t, A&&... a );

    // queries

    constexpr bool has_value() const noexcept;
    constexpr bool has_error() const noexcept;
    constexpr explicit operator bool() const noexcept;

    // checked value access

    constexpr void value() const;

    // unchecked value access

    constexpr void* operator->() noexcept;
    constexpr void const* operator->() const noexcept;

    constexpr void operator*() const noexcept;

    // error access

    constexpr E error() const;

    // swap

    constexpr void swap( result& r );
    friend constexpr void swap( result & r1, result & r2 );

    // equality

    friend constexpr bool operator==( result const & r1, result const & r2 );
    friend constexpr bool operator!=( result const & r1, result const & r2 );
};

// stream insertion

template<class Ch, class Tr, class E>
  std::basic_ostream<Ch, Tr>&
    operator<<( std::basic_ostream<Ch, Tr>& os, result<void, E> const & r );

} // namespace system
} // namespace boost
Constructors
constexpr result() noexcept;
  • Ensures:

    *this holds an unspecified value.

template<class... A>
  constexpr result( A&&... a );
  • Effects:
    • If std::is_constructible<E, A…​>::value, ensures that *this holds the error E( std::forward<A>(a)…​ ).

    • Otherwise, this constructor does not participate in overload resolution.

    Remarks:

    This constructor is only enabled when sizeof…​(T) > 0.

template<class... A>
  constexpr result( in_place_value_t ) noexcept;
  • Ensures:

    *this holds an unspecified value.

template<class... A>
  constexpr result( in_place_error_t, A&&... a );
  • Ensures:

    *this holds the error E( std::forward<A>(a)…​ ).

    Remarks:

    This constructor is only enabled when std::is_constructible<E, A…​>::value is true.

Queries
constexpr bool has_value() const noexcept;
  • Returns:

    true when *this holds a value, false otherwise.

constexpr bool has_error() const noexcept;
  • Returns:

    !has_value().

constexpr explicit operator bool() const noexcept;
  • Returns:

    has_value().

Checked Value Access
constexpr void value() const;
  • Effects:

    If *this doesn’t hold a value, calls throw_exception_from_error, passing it a reference to the held error.

Unchecked Value Access
constexpr void* operator->() noexcept;
constexpr void const* operator->() const noexcept;
  • Returns:

    If *this holds a value, a pointer to it. Otherwise, nullptr.

constexpr void operator*() const noexcept;
  • Requires:

    *this holds a value.

    Effects:

    none.

Error Access
constexpr E error() const;
  • Effects:

    If *this holds an error, returns it. Otherwise, returns E().

swap
constexpr void swap( result& r );
  • Effects:

    Exchanges the contents of *this and r.

friend constexpr void swap( result & r1, result & r2 );
  • Effects:

    Exchanges the contents of r1 and r2.

Equality
friend constexpr bool operator==( result const & r1, result const & r2 );
  • Effects:
    • If r1 and r2 hold values, returns true.

    • If r1 holds an error e1 and r2 holds an error e2, returns e1 == e2.

    • Otherwise, returns false.

friend constexpr bool operator!=( result const & r1, result const & r2 );
  • Returns:

    !( r1 == r2 ).

Stream Insertion
template<class Ch, class Tr, class E>
  std::basic_ostream<Ch, Tr>&
    operator<<( std::basic_ostream<Ch, Tr>& os, result<void, E> const & r );
  • Effects:
    • If *this holds a value, os << "value:void".

    • If *this holds an error e, os << "error:" << e.

    Returns:

    os.

<boost/system.hpp>

This convenience header includes all the headers previously described.

History

N1975, Filesystem Library Proposal for TR2, accepted for Library Technical Report 2 (TR2) at the Berlin meeting, included additional components to supplement the Standard Library’s Diagnostics clause. Since then, these error reporting components have received wider public scrutiny and enhancements have been made to the design. The enhanced version has been used by N2054, Networking Library Proposal for TR2, demonstrating that these error reporting components are useful beyond the original Filesystem Library.

The original proposal viewed error categories as a binary choice between errno (i.e. POSIX-style) and the native operating system’s error codes. The proposed components now allow as many additional error categories as are needed by either implementations or by users. The need to support additional error categories, for example, occurs in some networking library implementations because they are built on top of the POSIX getaddrinfo API that uses error codes not based on errno.

Acknowledgments

Christopher Kohlhoff and Peter Dimov made important contributions to the design. Comments and suggestions were also received from Pavel Vozenilek, Gennaro Prota, Dave Abrahams, Jeff Garland, Iain Hanson, Oliver Kowalke, and Oleg Abrosimov. Christopher Kohlhoff suggested several improvements to the N2066 paper. Johan Nilsson’s comments led to several of the refinements in N2066.

This documentation is

  • Copyright 2003-2017 Beman Dawes

  • Copyright 2018-2021 Peter Dimov

and is distributed under the Boost Software License, Version 1.0.