boost/wave/wave_config.hpp
/*=============================================================================
Boost.Wave: A Standard compliant C++ preprocessor library
Global application configuration
http://www.boost.org/
Copyright (c) 2001-2012 Hartmut Kaiser. Distributed under the Boost
Software License, Version 1.0. (See accompanying file
LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
=============================================================================*/
#if !defined(WAVE_CONFIG_HPP_F143F90A_A63F_4B27_AC41_9CA4F14F538D_INCLUDED)
#define WAVE_CONFIG_HPP_F143F90A_A63F_4B27_AC41_9CA4F14F538D_INCLUDED
#include <boost/config.hpp>
#include <boost/detail/workaround.hpp>
#include <boost/version.hpp>
#include <boost/spirit/include/classic_version.hpp>
#include <boost/wave/wave_version.hpp>
///////////////////////////////////////////////////////////////////////////////
// Define the maximal include nesting depth allowed. If this value isn't
// defined it defaults to 1024
//
// To define a new initial include nesting define the following constant
// before including this file.
//
#if !defined(BOOST_WAVE_MAX_INCLUDE_LEVEL_DEPTH)
#define BOOST_WAVE_MAX_INCLUDE_LEVEL_DEPTH 1024
#endif
///////////////////////////////////////////////////////////////////////////////
// Decide, whether to support variadics and placemarkers
//
// To implement support variadics and placemarkers define the following to
// something not equal to zero.
//
#if !defined(BOOST_WAVE_SUPPORT_VARIADICS_PLACEMARKERS)
#define BOOST_WAVE_SUPPORT_VARIADICS_PLACEMARKERS 1
#endif
///////////////////////////////////////////////////////////////////////////////
// Decide, whether to implement a #warning directive as an extension to the
// C++ Standard (same as #error, but emits a warning, not an error)
//
// To disable the implementation of #warning directives, define the following
// constant as zero before including this file.
//
#if !defined(BOOST_WAVE_SUPPORT_WARNING_DIRECTIVE)
#define BOOST_WAVE_SUPPORT_WARNING_DIRECTIVE 1
#endif
///////////////////////////////////////////////////////////////////////////////
// Decide, whether to implement #pragma once
//
// To disable the implementation of #pragma once, define the following
// constant as zero before including this file.
//
#if !defined(BOOST_WAVE_SUPPORT_PRAGMA_ONCE)
#define BOOST_WAVE_SUPPORT_PRAGMA_ONCE 1
#endif
///////////////////////////////////////////////////////////////////////////////
// Decide, whether to implement #pragma message("")
//
// To disable the implementation of #pragma message(""), define the following
// constant as zero before including this file.
//
#if !defined(BOOST_WAVE_SUPPORT_PRAGMA_MESSAGE)
#define BOOST_WAVE_SUPPORT_PRAGMA_MESSAGE 1
#endif
///////////////////////////////////////////////////////////////////////////////
// Decide, whether to implement #include_next
// Please note, that this is an extension to the C++ Standard.
//
// To disable the implementation of #include_next, define the following
// constant as zero before including this file.
//
#if !defined(BOOST_WAVE_SUPPORT_INCLUDE_NEXT)
#define BOOST_WAVE_SUPPORT_INCLUDE_NEXT 1
#endif
///////////////////////////////////////////////////////////////////////////////
// Decide, whether to support C++11
//
// To implement C++11 keywords and preprocessor semantics define the following
// to something not equal to zero.
//
#if !defined(BOOST_WAVE_SUPPORT_CPP0X)
#define BOOST_WAVE_SUPPORT_CPP0X 1
#undef BOOST_WAVE_SUPPORT_VARIADICS_PLACEMARKERS
#define BOOST_WAVE_SUPPORT_VARIADICS_PLACEMARKERS 1
#endif
///////////////////////////////////////////////////////////////////////////////
// Undefine the following, to enable some MS specific language extensions:
// __int8, __int16, __int32, __int64, __based, __declspec, __cdecl,
// __fastcall, __stdcall, __try, __except, __finally, __leave, __inline,
// __asm, #region, #endregion
//
// Note: By default this is enabled for Windows based systems, otherwise it's
// disabled.
#if !defined(BOOST_WAVE_SUPPORT_MS_EXTENSIONS)
#if defined(BOOST_WINDOWS)
#define BOOST_WAVE_SUPPORT_MS_EXTENSIONS 1
#else
#define BOOST_WAVE_SUPPORT_MS_EXTENSIONS 0
#endif
#endif
///////////////////////////////////////////////////////////////////////////////
// Allow the message body of the #error and #warning directives to be
// preprocessed before the diagnostic is issued.
//
// To disable preprocessing of the body of #error and #warning directives,
// define the following constant as zero before including this file.
//
#if !defined(BOOST_WAVE_PREPROCESS_ERROR_MESSAGE_BODY)
#define BOOST_WAVE_PREPROCESS_ERROR_MESSAGE_BODY 1
#endif
///////////////////////////////////////////////////////////////////////////////
// Allow the #pragma directives to be returned to the caller (optionally after
// preprocessing the body)
//
// To disable the library to emit unknown #pragma directives, define the
// following constant as zero before including this file.
//
#if !defined(BOOST_WAVE_EMIT_PRAGMA_DIRECTIVES)
#define BOOST_WAVE_EMIT_PRAGMA_DIRECTIVES 1
#endif
///////////////////////////////////////////////////////////////////////////////
// Allow the body of a #pragma directive to be preprocessed before the
// directive is returned to the caller.
//
// To disable the preprocessing of the body of #pragma directives, define the
// following constant as zero before including this file.
//
#if !defined(BOOST_WAVE_PREPROCESS_PRAGMA_BODY)
#define BOOST_WAVE_PREPROCESS_PRAGMA_BODY 1
#endif
///////////////////////////////////////////////////////////////////////////////
// Allow to define macros with the command line syntax (-DMACRO(x)=definition)
//
// To disable the possibility to define macros based on the command line
// syntax, define the following constant as zero before including this file.
//
#if !defined(BOOST_WAVE_ENABLE_COMMANDLINE_MACROS)
#define BOOST_WAVE_ENABLE_COMMANDLINE_MACROS 1
#endif
///////////////////////////////////////////////////////////////////////////////
// Define the pragma keyword to be used by the library to recognize its own
// pragma's. If nothing else is defined, then 'wave' will be used as the
// default keyword, i.e. the library recognizes all
//
// #pragma wave option [(argument)]
//
// and dispatches the handling to the interpret_pragma() preprocessing hook
// function (see file: preprocessing_hooks.hpp). The arguments part of the
// pragma is optional.
// The BOOST_WAVE_PRAGMA_KEYWORD constant needs to be defined to
// resolve as a string literal value.
#if !defined(BOOST_WAVE_PRAGMA_KEYWORD)
#define BOOST_WAVE_PRAGMA_KEYWORD "wave"
#endif
///////////////////////////////////////////////////////////////////////////////
// Configure Wave thread support, Boost.Spirit and Boost.Pool are configured
// based on these settings automatically
//
// If BOOST_WAVE_SUPPORT_THREADING is not defined, Wave will use the global
// Boost build settings (BOOST_HAS_THREADS), if it is defined its value
// defines, whether threading will be enabled or not (should be set to '0'
// or '1').
#if !defined(BOOST_WAVE_SUPPORT_THREADING)
#if defined(BOOST_HAS_THREADS)
#define BOOST_WAVE_SUPPORT_THREADING 1
#else
#define BOOST_WAVE_SUPPORT_THREADING 0
#endif
#endif
#if BOOST_WAVE_SUPPORT_THREADING != 0
#define BOOST_SPIRIT_THREADSAFE 1
#define PHOENIX_THREADSAFE 1
#else
// disable thread support in Boost.Pool
#define BOOST_NO_MT 1
#endif
///////////////////////////////////////////////////////////////////////////////
// Define the string type to be used to store the token values and the file
// names inside a file_position template class
//
#if !defined(BOOST_WAVE_STRINGTYPE)
// VC7 isn't able to compile the flex_string class, fall back to std::string
// CW up to 8.3 chokes as well *sigh*
// Tru64/CXX has linker problems when using flex_string
#if BOOST_WORKAROUND(BOOST_MSVC, <= 1300) || \
BOOST_WORKAROUND(__MWERKS__, < 0x3200) || \
(defined(__DECCXX) && defined(__alpha)) || \
defined(BOOST_WAVE_STRINGTYPE_USE_STDSTRING)
#define BOOST_WAVE_STRINGTYPE std::string
#if !defined(BOOST_WAVE_STRINGTYPE_USE_STDSTRING)
#define BOOST_WAVE_STRINGTYPE_USE_STDSTRING 1
#endif
#else
// use the following, if you have a fast std::allocator<char>
#define BOOST_WAVE_STRINGTYPE boost::wave::util::flex_string< \
char, std::char_traits<char>, std::allocator<char>, \
boost::wave::util::CowString< \
boost::wave::util::AllocatorStringStorage<char> \
> \
> \
/**/
// This include is needed for the flex_string class used in the
// BOOST_WAVE_STRINGTYPE above.
#include <boost/wave/util/flex_string.hpp>
#endif // BOOST_WORKAROUND(_MSC_VER, <= 1300) et.al.
#endif // !defined(BOOST_WAVE_STRINGTYPE)
///////////////////////////////////////////////////////////////////////////////
// The following definition forces the Spirit tree code to use list's instead
// of vectors, which may be more efficient on some platforms
// #define BOOST_SPIRIT_USE_LIST_FOR_TREES
///////////////////////////////////////////////////////////////////////////////
// The following definition forces the Spirit tree code to use boost pool
// allocators instead of the std::allocator for the vector/list's.
// #define BOOST_SPIRIT_USE_BOOST_ALLOCATOR_FOR_TREES
///////////////////////////////////////////////////////////////////////////////
// Uncomment the following, if you need debug output, the
// BOOST_SPIRIT_DEBUG_FLAGS_CPP constants below help to fine control the
// amount of the generated debug output.
//#define BOOST_SPIRIT_DEBUG
///////////////////////////////////////////////////////////////////////////////
// Debug flags for the Wave library, possible flags specified below.
//
// Note: These flags take effect only if the BOOST_SPIRIT_DEBUG constant
// above is defined as well.
#define BOOST_SPIRIT_DEBUG_FLAGS_CPP_GRAMMAR 0x0001
#define BOOST_SPIRIT_DEBUG_FLAGS_TIME_CONVERSION 0x0002
#define BOOST_SPIRIT_DEBUG_FLAGS_CPP_EXPR_GRAMMAR 0x0004
#define BOOST_SPIRIT_DEBUG_FLAGS_INTLIT_GRAMMAR 0x0008
#define BOOST_SPIRIT_DEBUG_FLAGS_CHLIT_GRAMMAR 0x0010
#define BOOST_SPIRIT_DEBUG_FLAGS_DEFINED_GRAMMAR 0x0020
#define BOOST_SPIRIT_DEBUG_FLAGS_PREDEF_MACROS_GRAMMAR 0x0040
#if !defined(BOOST_SPIRIT_DEBUG_FLAGS_CPP)
#define BOOST_SPIRIT_DEBUG_FLAGS_CPP 0 // default is no debugging
#endif
///////////////////////////////////////////////////////////////////////////////
//
// For all recognized preprocessor statements the output parse trees
// formatted as xml are printed. The formatted parse trees are streamed to the
// std::ostream defined by the WAVE_DUMP_PARSE_TREE_OUT constant.
//
// To enable the output of these parse trees, define the following constant
// as zero something not equal to zero before including this file.
//
#if !defined(BOOST_WAVE_DUMP_PARSE_TREE)
#define BOOST_WAVE_DUMP_PARSE_TREE 0
#endif
#if BOOST_WAVE_DUMP_PARSE_TREE != 0 && !defined(BOOST_WAVE_DUMP_PARSE_TREE_OUT)
#define BOOST_WAVE_DUMP_PARSE_TREE_OUT std::cerr
#endif
///////////////////////////////////////////////////////////////////////////////
//
// For all #if and #elif directives the preprocessed expressions are printed.
// These expressions are streamed to the std::ostream defined by the
// BOOST_WAVE_DUMP_CONDITIONAL_EXPRESSIONS_OUT constant.
//
// To enable the output of the preprocessed expressions, define the following
// constant as something not equal to zero before including this file.
//
#if !defined(BOOST_WAVE_DUMP_CONDITIONAL_EXPRESSIONS)
#define BOOST_WAVE_DUMP_CONDITIONAL_EXPRESSIONS 0
#endif
#if BOOST_WAVE_DUMP_CONDITIONAL_EXPRESSIONS != 0 && \
!defined(BOOST_WAVE_DUMP_CONDITIONAL_EXPRESSIONS_OUT)
#define BOOST_WAVE_DUMP_CONDITIONAL_EXPRESSIONS_OUT std::cerr
#endif
///////////////////////////////////////////////////////////////////////////////
// Decide, whether to use the separate compilation model for the instantiation
// of the C++ lexer objects.
//
// If this is defined, you should explicitly instantiate the C++ lexer
// template with the correct parameters in a separate compilation unit of
// your program (see the file instantiate_re2c_lexer.cpp).
//
// To use the lexer inclusion model, define the following constant as
// something not equal to zero before including this file.
//
#if !defined(BOOST_WAVE_SEPARATE_LEXER_INSTANTIATION)
#define BOOST_WAVE_SEPARATE_LEXER_INSTANTIATION 1
#endif
///////////////////////////////////////////////////////////////////////////////
// Decide, whether to use the separate compilation model for the instantiation
// of the grammar objects.
//
// If this is defined, you should explicitly instantiate the grammar
// templates with the correct parameters in a separate compilation unit of
// your program (see the files instantiate_cpp_grammar.cpp et.al.).
//
// To use the grammar inclusion model, define the following constant as
// something not equal to zero before including this file.
//
#if !defined(BOOST_WAVE_SEPARATE_GRAMMAR_INSTANTIATION)
#define BOOST_WAVE_SEPARATE_GRAMMAR_INSTANTIATION 1
#endif
///////////////////////////////////////////////////////////////////////////////
// Decide whether to use a strict C++ lexer.
//
// If this is defined to something != 0, then the C++ lexers recognize the
// strict C99/C++ basic source character set. If it is not defined or defined
// to zero, the C++ lexers recognize the '$' character as part of identifiers.
//
// The default is to recognize the '$' character as part of identifiers.
//
#if !defined(BOOST_WAVE_USE_STRICT_LEXER)
#define BOOST_WAVE_USE_STRICT_LEXER 0
#endif
///////////////////////////////////////////////////////////////////////////////
// Decide, whether the serialization of the wave::context class should be
// supported
//
// If this is defined to something not equal to zero the generated code will
// expose routines allowing to store and reload the internal state of the
// wave::context object.
//
// To enable the availability of the serialization functionality, define the
// following constant as something not equal to zero before including this file.
//
#if !defined(BOOST_WAVE_SERIALIZATION)
#define BOOST_WAVE_SERIALIZATION 0
#endif
///////////////////////////////////////////////////////////////////////////////
// Decide, whether the import keyword is recognized as such
//
// If this is defined to something not equal to zero the Wave will recognize
// import as a keyword (T_IMPORT token id)
//
#if !defined(BOOST_WAVE_SUPPORT_IMPORT_KEYWORD)
#define BOOST_WAVE_SUPPORT_IMPORT_KEYWORD 0
#endif
///////////////////////////////////////////////////////////////////////////////
// Decide, whether to support long long integers in the preprocessor.
//
// The C++ standard requires the preprocessor to use one of the following
// types for integer literals: long or unsigned long depending on an optional
// suffix ('u', 'l', 'ul', or 'lu')
//
// Sometimes it's required to preprocess integer literals bigger than that
// (i.e. long long or unsigned long long). In this case you need to define the
// BOOST_WAVE_SUPPORT_LONGLONG_INTEGER_LITERALS to something not equal to zero.
//
// This pp constant is effective only, if your target platform supports
// long long integers (BOOST_HAS_LONG_LONG is defined).
//
// Please note, that this setting doesn't relate to the Wave support option
// support_option_long_long, which enables the recognition of 'll' suffixes
// only.
//
// Defining this pp constant enables the recognition of long long integers
// even if these do not have the 'll' suffix.
//
#if !defined(BOOST_WAVE_SUPPORT_LONGLONG_INTEGER_LITERALS)
#define BOOST_WAVE_SUPPORT_LONGLONG_INTEGER_LITERALS 0
#endif
namespace boost { namespace wave
{
#if defined(BOOST_HAS_LONG_LONG) && \
BOOST_WAVE_SUPPORT_LONGLONG_INTEGER_LITERALS != 0
typedef boost::long_long_type int_literal_type;
typedef boost::ulong_long_type uint_literal_type;
#else
typedef long int_literal_type;
typedef unsigned long uint_literal_type;
#endif
}}
///////////////////////////////////////////////////////////////////////////////
// On some platforms Wave will not be able to properly detect whether wchar_t
// is representing a signed or unsigned integral data type. Use the
// configuration constants below to force wchar_t being signed or unsigned, as
// appropriate.
//
// The default is to use std::numeric_limits<wchar_t>::is_signed.
#define BOOST_WAVE_WCHAR_T_AUTOSELECT 1
#define BOOST_WAVE_WCHAR_T_FORCE_SIGNED 2
#define BOOST_WAVE_WCHAR_T_FORCE_UNSIGNED 3
#if !defined(BOOST_WAVE_WCHAR_T_SIGNEDNESS)
#define BOOST_WAVE_WCHAR_T_SIGNEDNESS BOOST_WAVE_WCHAR_T_AUTOSELECT
#endif
///////////////////////////////////////////////////////////////////////////////
// Wave needs at least 4 parameters for phoenix actors
#if !defined(PHOENIX_LIMIT)
#define PHOENIX_LIMIT 6
#endif
#if PHOENIX_LIMIT < 6
// boost/home/classic/spirit/classic_attribute.hpp sets PHOENIX_LIMIT to 3!
#error "Boost.Wave: the constant PHOENIX_LIMIT must be at least defined to 6" \
" to compile the library."
#endif
///////////////////////////////////////////////////////////////////////////////
// Set up dll import/export options
#if (defined(BOOST_WAVE_DYN_LINK) || defined(BOOST_ALL_DYN_LINK)) && \
!defined(BOOST_WAVE_STATIC_LINK)
#if defined(BOOST_WAVE_SOURCE)
#define BOOST_WAVE_DECL BOOST_SYMBOL_EXPORT
#define BOOST_WAVE_BUILD_DLL
#else
#define BOOST_WAVE_DECL BOOST_SYMBOL_IMPORT
#endif
#endif // building a shared library
#ifndef BOOST_WAVE_DECL
#define BOOST_WAVE_DECL
#endif
///////////////////////////////////////////////////////////////////////////////
// Auto library naming
#if BOOST_VERSION >= 103100
// auto link features work beginning from Boost V1.31.0
#if !defined(BOOST_WAVE_SOURCE) && !defined(BOOST_ALL_NO_LIB) && \
!defined(BOOST_WAVE_NO_LIB)
#define BOOST_LIB_NAME boost_wave
// tell the auto-link code to select a dll when required:
#if defined(BOOST_ALL_DYN_LINK) || defined(BOOST_WAVE_DYN_LINK)
#define BOOST_DYN_LINK
#endif
#include <boost/config/auto_link.hpp>
#endif // auto-linking disabled
#endif // BOOST_VERSION
///////////////////////////////////////////////////////////////////////////////
// Compatibility macros
// (ensure interface compatibility to older Wave versions)
///////////////////////////////////////////////////////////////////////////////
///////////////////////////////////////////////////////////////////////////////
// The preprocessing hook signatures changed after the Boost V1.34.0 release
//
// To use the preprocessing hook signatures as released with Boost V1.34.0
// you need to define the BOOST_WAVE_USE_DEPRECIATED_PREPROCESSING_HOOKS
// constant to something not equal zero.
//
// To force using the new interface define this constant to zero.
//
#if !defined(BOOST_WAVE_USE_DEPRECIATED_PREPROCESSING_HOOKS)
#if BOOST_VERSION < 103500 // before Boost V1.35.0
#define BOOST_WAVE_USE_DEPRECIATED_PREPROCESSING_HOOKS 1
#else
#define BOOST_WAVE_USE_DEPRECIATED_PREPROCESSING_HOOKS 0
#endif
#endif
#endif // !defined(WAVE_CONFIG_HPP_F143F90A_A63F_4B27_AC41_9CA4F14F538D_INCLUDED)
