Initial review version, for the review conducted from 7th December 2007 to
16th December 2007.
Unofficial release uploaded to vault, to be used with Boost 1.35.0. Incorporated
many of the suggestions from the review.
-
Improved portability thanks to Boost regression testing.
-
Fix lots of typos, and clearer text in the documentation.
-
Fix floating point to
std::size_t
conversion when calculating sizes from the max load factor, and use double in the calculation for greater accuracy.
-
Fix some errors in the examples.
First official release.
-
Rearrange the internals.
-
Move semantics - full support when rvalue references are available, emulated
using a cut down version of the Adobe move library when they are not.
-
Emplace support when rvalue references and variadic template are available.
-
More efficient node allocation when rvalue references and variadic template
are available.
-
Added equality operators.
-
Rename overload of
emplace
with hint, to emplace_hint
as specified in n2691.
-
Provide forwarding headers at
<boost/unordered/unordered_map_fwd.hpp>
and <boost/unordered/unordered_set_fwd.hpp>.
-
Move all the implementation inside
boost/unordered,
to assist modularization and hopefully make it easier to track changes
in subversion.
-
Use
boost::swap.
-
Ticket 2237:
Document that the equality and inequality operators are undefined for two
objects if their equality predicates aren't equivalent. Thanks to Daniel
Krügler.
-
Ticket 1710:
Use a larger prime number list. Thanks to Thorsten Ottosen and Hervé Brönnimann.
-
Use aligned
storage to store the types. This changes the way the allocator
is used to construct nodes. It used to construct the node with two calls
to the allocator's
construct
method - once for the pointers and once for the value. It now constructs
the node with a single call to construct and then constructs the value
using in place construction.
-
Add support for C++0x initializer lists where they're available (currently
only g++ 4.4 in C++0x mode).
-
Ticket 2756:
Avoid a warning on Visual C++ 2009.
-
Some other minor internal changes to the implementation, tests and documentation.
-
Avoid an unnecessary copy in
operator[].
-
Ticket 2975:
Fix length of prime number list.
-
Ticket 2975:
Store the prime list as a preprocessor sequence - so that it will always
get the length right if it changes again in the future.
-
Ticket 1978:
Implement
emplace for all
compilers.
-
Ticket 2908,
Ticket 3096:
Some workarounds for old versions of borland, including adding explicit
destructors to all containers.
-
Ticket 3082:
Disable incorrect Visual C++ warnings.
-
Better configuration for C++0x features when the headers aren't available.
-
Create less buckets by default.
-
The original version made heavy use of macros to sidestep some of the older
compilers' poor template support. But since I no longer support those compilers
and the macro use was starting to become a maintenance burden it has been
rewritten to use templates instead of macros for the implementation classes.
-
The container object is now smaller thanks to using
boost::compressed_pair
for EBO and a slightly different function buffer - now using a bool instead
of a member pointer.
-
Buckets are allocated lazily which means that constructing an empty container
will not allocate any memory.
-
Support instantiating the containers with incomplete value types.
-
Reduced the number of warnings (mostly in tests).
-
Improved codegear compatibility.
-
Ticket 3693:
Add
erase_return_void as
a temporary workaround for the current erase
which can be inefficient because it has to find the next element to return
an iterator.
-
Add templated find overload for compatible keys.
-
Ticket 3773:
Add missing
std qualifier
to ptrdiff_t.
-
Some code formatting changes to fit almost all lines into 80 characters.
-
Ticket 3966:
erase_return_void is now
quick_erase, which is the
current
forerunner for resolving the slow erase by iterator, although there's
a strong possibility that this may change in the future. The old method
name remains for backwards compatibility but is considered deprecated and
will be removed in a future release.
-
Use Boost.Exception.
-
Stop using deprecated
BOOST_HAS_* macros.
-
Fix a bug when inserting into an
unordered_map
or unordered_set using
iterators which returns value_type
by copy.
This is major change which has been converted to use Boost.Move's move emulation,
and be more compliant with the C++11 standard. See the compliance
section for details.
The container now meets C++11's complexity requirements, but to do so uses
a little more memory. This means that quick_erase
and erase_return_void are no
longer required, they'll be removed in a future version.
C++11 support has resulted in some breaking changes:
-
Equality comparison has been changed to the C++11 specification. In a container
with equivalent keys, elements in a group with equal keys used to have
to be in the same order to be considered equal, now they can be a permutation
of each other. To use the old behavior define the macro
BOOST_UNORDERED_DEPRECATED_EQUALITY.
-
The behaviour of swap is different when the two containers to be swapped
has unequal allocators. It used to allocate new nodes using the appropriate
allocators, it now swaps the allocators if the allocator has a member structure
propagate_on_container_swap,
such that propagate_on_container_swap::value
is true.
-
Allocator's
construct and
destroy functions are called
with raw pointers, rather than the allocator's pointer
type.
-
emplace used to emulate
the variadic pair constructors that appeared in early C++0x drafts. Since
they were removed it no longer does so. It does emulate the new piecewise_construct pair constructors
- only you need to use boost::piecewise_construct.
To use the old emulation of the variadic constructors define BOOST_UNORDERED_DEPRECATED_PAIR_CONSTRUCT.
-
Fix warning due to accidental odd assignment.
-
Slightly better error messages.
-
Fix equality for
unordered_multiset
and unordered_multimap.
-
Ticket 6857:
Implement
reserve.
-
Ticket 6771:
Avoid gcc's
-Wfloat-equal
warning.
-
Ticket 6784:
Fix some Sun specific code.
-
Ticket 6190:
Avoid gcc's
-Wshadow
warning.
-
Ticket 6905:
Make namespaces in macros compatible with
bcp
custom namespaces. Fixed by Luke Elliott.
-
Remove some of the smaller prime number of buckets, as they may make collisions
quite probable (e.g. multiples of 5 are very common because we used base
10).
-
On old versions of Visual C++, use the container library's implementation
of
allocator_traits, as
it's more likely to work.
-
On machines with 64 bit std::size_t, use power of 2 buckets, with Thomas
Wang's hash function to pick which one to use. As modulus is very slow
for 64 bit values.
-
Some internal changes.
-
Fix construction/destruction issue when using a C++11 compiler with a C++03
allocator (#7100).
-
Remove a
try..catch to support compiling without exceptions.
-
Adjust SFINAE use to try to support g++ 3.4 (#7175).
-
Updated to use the new config macros.
-
Faster assign, which assigns to existing nodes where possible, rather than
creating entirely new nodes and copy constructing.
-
Fixed bug in
erase_range
(#7471).
-
Reverted some of the internal changes to how nodes are created, especially
for C++11 compilers. 'construct' and 'destroy' should work a little better
for C++11 allocators.
-
Simplified the implementation a bit. Hopefully more robust.
-
Remove support for the old pre-standard variadic pair constructors, and
equality implementation. Both have been deprecated since Boost 1.48.
-
Remove use of deprecated config macros.
-
More internal implementation changes, including a much simpler implementation
of
erase.
-
Mark methods specified in standard as
noexpect.
More to come in the next release.
-
If the hash function and equality predicate are known to both have nothrow
move assignment or construction then use them.
-
Avoid some warnings (#8851, #8874).
-
Avoid exposing some detail functions via. ADL on the iterators.
-
Follow the standard by only using the allocators' construct and destroy
methods to construct and destroy stored elements. Don't use them for internal
data like pointers.
-
Fix some shadowed variable warnings (#9377).
-
Fix allocator use in documentation (#9719).
-
Always use prime number of buckets for integers. Fixes performance regression
when inserting consecutive integers, although makes other uses slower (#9282).
-
Only construct elements using allocators, as specified in C++11 standard.
-
Fix the
pointer typedef
in iterators (#10672).
-
Fix Coverity warning (GitHub
#2).
-
Remove unnecessary template parameter from const iterators.
-
Rename private
iterator
typedef in some iterator classes, as it confuses some traits classes.
-
Fix move assignment with stateful, propagate_on_container_move_assign allocators
(#10777).
-
Fix rare exception safety issue in move assignment.
-
Fix potential overflow when calculating number of buckets to allocate (GitHub #4).
-
Remove use of deprecated
boost::iterator.
-
Remove
BOOST_NO_STD_DISTANCE
workaround.
-
Remove
BOOST_UNORDERED_DEPRECATED_EQUALITY
warning.
-
Simpler implementation of assignment, fixes an exception safety issue for
unordered_multiset and
unordered_multimap. Might
be a little slower.
-
Stop using return value SFINAE which some older compilers have issues with.
-
Check hint iterator in
insert/emplace_hint.
-
Fix some warnings, mostly in the tests.
-
Manually write out
emplace_args
for small numbers of arguments - should make template error messages a
little more bearable.
-
Remove superfluous use of
boost::forward
in emplace arguments, which fixes emplacing string literals in old versions
of Visual C++.
-
Fix an exception safety issue in assignment. If bucket allocation throws
an exception, it can overwrite the hash and equality functions while leaving
the existing elements in place. This would mean that the function objects
wouldn't match the container elements, so elements might be in the wrong
bucket and equivalent elements would be incorrectly handled.
-
Various reference documentation improvements.
-
Better allocator support (#12459).
-
Make the no argument constructors implicit.
-
Implement missing allocator aware constructors.
-
Fix assigning the hash/key equality functions for empty containers.
-
Remove unary/binary_function from the examples in the documentation. They
are removed in C++17.
-
Support 10 constructor arguments in emplace. It was meant to support up
to 10 arguments, but an off by one error in the preprocessor code meant
it only supported up to 9.
-
Initial support for new C++17 member functions:
insert_or_assign
and try_emplace in unordered_map,
-
Initial support for
merge
and extract. Does not include
transferring nodes between unordered_map
and unordered_multimap
or between unordered_set
and unordered_multiset
yet. That will hopefully be in the next version of Boost.
-
Add deprecated attributes to
quick_erase
and erase_return_void.
I really will remove them in a future version this time.
-
Small standards compliance fixes:
-
noexpect specs for
swap free functions.
-
Add missing
insert(P&&) methods.
Boost
C++ Libraries
